{"title":"Apollo Sounders","description":"\u003cp\u003eOur Apollo sounders deliver loud, attention-grabbing alerts to ensure fast evacuation in the event of a fire. Suitable for residential, commercial, and industrial settings, they’re designed for clarity, reliability, and compliance with UK fire safety standards.\u003c\/p\u003e\n\u003cp\u003eAt WME, you’ll find options like the \u003ca href=\"https:\/\/wmestore.co.uk\/products\/apollo-45681-705apo-vad-base-sounder-with-isolated-mounting-base-en54-compliant\" title=\"Apollo: 45681-705APO, XP95 Sounder VAD Base\"\u003eApollo XP95 Sounder Base\u003c\/a\u003e and other \u003ca href=\"https:\/\/wmestore.co.uk\/collections\/apollo-reliable-fire-detection-alarm-systems\" title=\"Apollo products \"\u003efire alarm accessories\u003c\/a\u003e. Pair them with \u003ca href=\"https:\/\/wmestore.co.uk\/collections\/apollo-smoke-detectors\" title=\"Apollo smoke detectors \"\u003eApollo smoke detectors\u003c\/a\u003e, \u003ca href=\"https:\/\/wmestore.co.uk\/collections\/apollo-heat-detectors\" title=\"Apollo heat detectors\"\u003eheat detectors\u003c\/a\u003e, and \u003ca href=\"https:\/\/wmestore.co.uk\/collections\/apollo-call-points\" title=\"apollo call points collection\"\u003ecall points\u003c\/a\u003e for a complete fire safety system.\u003c\/p\u003e\n\u003cp\u003eEngineered for high performance and durability, Apollo sounders offer consistent operation in demanding environments. \u003c\/p\u003e","products":[{"product_id":"apollo-45681-276apo-xp95-ancillary-base-sounder-loop-powered-85-db","title":"Apollo 45681-276APO XP95 Ancillary Base Sounder, Loop-Powered, 85 dB","description":"\u003cp\u003e\u003cstrong\u003eApollo 45681-276APO XP95 ancillary base sounder\u003c\/strong\u003e — loop‑powered local sounder for detector‑activated signalling in addressable fire systems. Fits compatible XP95, Discovery or Soteria detectors (or loop‑powered beacons) and is powered\/switched via the detector's remote output so it does not require a separate address.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLoop‑powered: 17–28 V DC (no external supply required).\u003c\/li\u003e\n  \u003cli\u003eGuaranteed sound output 85 dB(A) at 1 m; stepless\/adjustable down to ≈70 dB(A).\u003c\/li\u003e\n  \u003cli\u003eVery low quiescent current (~100 µA) and low operating (sound) current (~3 mA) — allows many units per loop.\u003c\/li\u003e\n  \u003cli\u003eWhite flame‑retardant polycarbonate housing, IP23D; operating temperature −20 °C to +60 °C.\u003c\/li\u003e\n  \u003cli\u003eEN54‑3 (sounder) compliant; intended for indoor local‑area signalling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases:\u003c\/strong\u003e detector‑activated local notification in commercial and residential installations where a local, address‑free audible indicator is required. Suitable for retrofits and new installations where panel programming uses the detector remote output to drive ancillary sounders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; compliance notes:\u003c\/strong\u003e as an ancillary (non‑addressed) sounder it is activated via the detector's remote output. Confirm that the fire alarm control panel and detector configuration support the remote output bit used for ancillary sounders. Refer to Apollo installation manual (PP2148) and panel commissioning guide for wiring, loop‑loading calculations and cause‑and‑effect programming. Ensure installation meets local regulations and EN54 requirements.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"-","offer_id":56594104746357,"sku":"45681-276APO","price":24.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002884_1.png?v=1768244965"},{"product_id":"xp95-addressable-sounder-vad-base-isolating-white-flash-45681-705apo","title":"XP95 Addressable Sounder VAD Base, Isolating, White Flash, 45681-705APO","description":"\u003cp\u003e\u003cstrong\u003eApollo 45681-705APO\u003c\/strong\u003e is a loop‑powered XP95 addressable combined sounder and visual alarm device (VAD) mounting base with an integral isolator. It provides selectable audible tones and volume ranges together with a white‑flash VAD (EN54‑23 Category O), and is intended for indoor fire‑alarm notification in XP95\/Discovery\/CoreProtocol systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLoop‑powered XP95 addressable sounder + VAD base with built‑in isolator (EN54‑17 4\" isolated base).\u003c\/li\u003e\n  \u003cli\u003eEN54‑3 (sounder), EN54‑23 (VAD Category O) and EN54‑17 (isolator) compliant.\u003c\/li\u003e\n  \u003cli\u003eSelectable tones and volume ranges; synchronised tone and VAD flash across groups.\u003c\/li\u003e\n  \u003cli\u003eSelf‑test functions for acoustic and VAD operation.\u003c\/li\u003e\n  \u003cli\u003e10‑year manufacturer warranty (Apollo).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical uses:\u003c\/strong\u003e notification base for addressable fire panels in commercial and public buildings where combined audible and visual signalling is required. Suitable for new installs or retrofits where XP95\/Discovery protocol detection systems are used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; safety:\u003c\/strong\u003e must be installed and commissioned by a competent person in accordance with the installation manual and current national regulations. Follow Apollo's datasheet\/installation guide for loop wiring, addressing and synchronisation settings. Ensure correct volume selection for the application; note some low range settings are not EN54‑3 compliant for re‑alarm uses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; certification:\u003c\/strong\u003e CE\/UKCA\/CPR references apply as shown on Apollo documentation—check the product datasheet for declarations of conformity and applicable approvals before installation.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"-","offer_id":56594136760693,"sku":"45681-705APO","price":81.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002914_1.png?v=1768245165"},{"product_id":"xp95-open-area-sounder-vid-red-92-100-db-17-28-v-dc-en54-3-55000-005apo","title":"XP95 Open-Area Sounder VID, Red, 92\/100 dB, 17-28 V DC, EN54-3, 55000-005APO","description":"\u003cp\u003e\u003cstrong\u003eApollo 55000-005APO\u003c\/strong\u003e is an intelligent loop-powered XP95\/Discovery-compatible open-area sounder with an integrated red visual indicator (VID). Designed for open indoor areas where a combined audible and visual alarm is required, it features selectable volume, multiple tone options, built-in short-circuit isolation and EN54-3 certification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntelligent addressable sounder with integrated red visual indicator (VID) — XP95 \u0026amp; Discovery compatible\u003c\/li\u003e\n  \u003cli\u003eSelectable sound levels: 92 dB(A) or 100 dB(A); multiple tone options including Apollo, Slow Whoop and DIN\/multi-tone\u003c\/li\u003e\n  \u003cli\u003eLoop-powered with built-in short-circuit isolator; mounts to a 4\" isolated base (EN54-17)\u003c\/li\u003e\n  \u003cli\u003eEN54-3 certified sounder; LPCB \/ CPR listed on manufacturer pages\u003c\/li\u003e\n  \u003cli\u003eIP65 rating for protected indoor installations; synchronisable tones and flashes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases:\u003c\/strong\u003e ideal for commercial and public buildings requiring combined audible and visual signalling in open areas — offices, corridors, retail spaces, warehouses and public access areas. Suitable for both contractor installs and engineered addressable fire systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; installation notes:\u003c\/strong\u003e EN54-3 certified. Install only with compatible fire control panels and the correct 4\" isolating base (EN54-17). Loop loading must be calculated by the installer — multiple sounder\/beacon devices on a single detection loop are limited by loop current. Installation should be carried out by a qualified fire alarm engineer following Apollo datasheets and local regulations. Check system compatibility (XP95\/Discovery) before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Manufacturer warranty typically 10 years. Refer to Apollo documentation for terms.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"-","offer_id":56594932760949,"sku":"55000-005APO","price":61.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002893_1.png?v=1768252770"},{"product_id":"apollo-alarmsense-open-area-sounder-red-ip65-99-dba-55000-018apo","title":"Apollo AlarmSense Open-Area Sounder, Red, IP65, 99 dB(A) 55000-018APO","description":"\u003cp\u003e\u003cstrong\u003eApollo 55000-018APO AlarmSense Open‑Area Sounder\u003c\/strong\u003e — a wall‑mounted open‑area sounder for AlarmSense two‑wire systems. Provides synchronised Apollo tones for clear audible warning in open spaces, is polarity‑insensitive for simplified wiring and features an IP65 rated enclosure for dust and water protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKey features\u003c\/strong\u003e: synchronised Apollo tones; polarity‑insensitive connections; IP65 dust\/water protection; common first‑fix base and device locking facility; compact polycarbonate housing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: ideal for offices, retail and other open indoor areas or exposed locations where IP65 is required. Designed for use on AlarmSense two‑wire loops.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstaller notes\u003c\/strong\u003e: common first‑fix base and polarity‑insensitive wiring speed installation and reduce wiring errors. Refer to the official datasheet for loop current, tone settings and full installation guidance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprovals \u0026amp; compliance\u003c\/strong\u003e: consult the manufacturer datasheet for standards and approvals before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer warranty: 10 years (manufacturer\/reseller listings). For full electrical figures and approvals see the Apollo product page and datasheet.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"-","offer_id":56594947932533,"sku":"55000-018APO","price":40.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002862_1.png?v=1768253444"},{"product_id":"apollo-alarmsense-open-area-sounder-vid-sounder-beacon-ip65-99-db-55000-017apo","title":"Apollo AlarmSense Open-Area Sounder VID, Sounder+Beacon, IP65, 99 dB, 55000-017APO","description":"\u003cp\u003e\u003cstrong\u003eApollo 55000-017APO AlarmSense Open‑Area Sounder Visual Indicator (Sounder VID)\u003c\/strong\u003e — combined wall‑mounted sounder and red LED visual indicator designed for AlarmSense two‑wire conventional fire systems. Robust IP65 enclosure for indoor and weather‑exposed locations, synchronised tone and flash, and tamper\/fault monitoring for reliable audible\/visual signalling in open areas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombined sounder + visual indicator for clear audible and visual alarm signalling.\u003c\/li\u003e\n  \u003cli\u003eDesigned for AlarmSense 2‑wire conventional systems; synchronises tone and flash with AlarmSense devices.\u003c\/li\u003e\n  \u003cli\u003ePolarity‑insensitive, monitored 2‑wire connection for easy retrofit and installation.\u003c\/li\u003e\n  \u003cli\u003eIP65 weatherproof enclosure — suitable for exposed locations such as car parks and plant rooms.\u003c\/li\u003e\n  \u003cli\u003eHigh sound output (up to 99 dB(A) at 1 m) with Apollo “Evacuate” tone and synchronised 1 Hz red LED flash.\u003c\/li\u003e\n  \u003cli\u003eAnti‑tamper \/ head removal fault monitoring and device locking facility.\u003c\/li\u003e\n  \u003cli\u003eManufacturer warranty: 10 years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Open corridors, car parks, plant rooms and other open areas where combined audible and visual alarm signalling is required. Compatible with systems using AlarmSense two‑wire conventional sounders and bases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; Safety:\u003c\/strong\u003e Manufacturer approvals and listings indicated (CPR, LPCB where stated by Apollo). Installation and wiring must be performed by a qualified engineer in accordance with local regulations and the product installation manual. Check the official datasheet\/installation manual for detailed mounting, cable entry and environmental limits.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"-","offer_id":56595099582837,"sku":"55000-017APO","price":43.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002866_1.png?v=1768257188"},{"product_id":"xp95-loop-powered-sounder-base-addressable-selectable-tones-volume-45681-278apo","title":"XP95 Loop-Powered Sounder Base, Addressable, Selectable Tones \u0026 Volume, 45681-278APO","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003eApollo XP95 loop-powered sounder base (45681-278APO). An addressable base sounder for XP95\/Discovery systems that provides local audible alarm tones driven from the loop. Designed for indoor use with compatible Apollo detectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLoop-powered XP95\/Discovery addressable sounder base.\u003c\/li\u003e\n  \u003cli\u003eTwo selectable tones and stepped\/adjustable volume settings for flexible site use.\u003c\/li\u003e\n  \u003cli\u003eFits XPERT family mounting bases and accepts appropriate addressing\/configuration cards.\u003c\/li\u003e\n  \u003cli\u003eSimple installation for contractors and retrofit applications; typical use in commercial and residential fire alarm systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLocal audible alerting integrated into the detector base — reduces wiring and installation time compared to separate sounders.\u003c\/li\u003e\n  \u003cli\u003eSelectable tone and volume allow compliance with site acoustic requirements.\u003c\/li\u003e\n  \u003cli\u003eAddressable operation provides individual and group control from the fire panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; Safety\u003c\/strong\u003e\u003cbr\u003eMeets relevant sounder approvals for Apollo sounder-base variants (e.g. EN54-3). Installation must be carried out by a qualified engineer in accordance with local fire and electrical regulations. Check the official Apollo datasheet for detailed wiring, current draw at each volume setting and recommended head spacing.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"-","offer_id":56595103449461,"sku":"45681-278APO","price":29.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002882_1.png?v=1768257352"},{"product_id":"apollo-45681-277apo-xp95-discovery-addressable-sounder-base-with-isolator-loop-powered-white","title":"Apollo 45681-277APO XP95\/Discovery Addressable Sounder Base with Isolator, Loop-Powered, White","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003eThe Apollo 45681-277APO is an XP95\/Discovery-compatible addressable sounder base with an integral short-circuit isolator and loop-powered sounder. It accepts an Apollo detector or beacon, or may be used standalone with a blanking cap. Intended for indoor use on intelligent addressable fire alarm loops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in short-circuit isolator for loop fault tolerance.\u003c\/li\u003e\n  \u003cli\u003eTwo selectable tones; two selectable volume ranges (55–75 dB(A) and 75–91 dB(A) at 1 m).\u003c\/li\u003e\n  \u003cli\u003eLoop-powered — no external supply required.\u003c\/li\u003e\n  \u003cli\u003eXP95 protocol compatible (also supports Discovery \u0026amp; CoreProtocol) with XPert7 addressing.\u003c\/li\u003e\n  \u003cli\u003eUnique acoustic self-test function to verify sounder operation.\u003c\/li\u003e\n  \u003cli\u003eFits a 4\" isolated mounting base; polycarbonate white housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommercial and domestic fire alarm systems using Apollo XP95\/Discovery detectors.\u003c\/li\u003e\n  \u003cli\u003eReplacement or upgrade where loop isolation and addressable sounder functionality is required.\u003c\/li\u003e\n  \u003cli\u003eInstallers: suitable where a combined detector\/sounder base or a standalone sounder base is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to meet EN54-3 requirements for fire alarm sounders; consult the Apollo datasheet for full approvals and the latest CE\/UKCA marking details.\u003c\/li\u003e\n  \u003cli\u003eInstallation and commissioning should be carried out by a competent person in accordance with local regulations and standards (eg BS 5839 series where applicable).\u003c\/li\u003e\n  \u003cli\u003eRefer to the official installation manual\/datasheet for full electrical figures, wiring diagrams and siting guidance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apollo Fire","offers":[{"title":"-","offer_id":56595105087861,"sku":"45681-277APO","price":33.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002559_1.png?v=1768257475"},{"product_id":"xp95-open-area-sounder-isolating-4-base-red-92-100-db-17-28-v-55000-001apo","title":"XP95 Open-Area Sounder, Isolating 4\" Base, Red, 92\/100 dB, 17-28 V, 55000-001APO","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003eThe Apollo 55000-001APO is an intelligent, loop‑powered open‑area sounder compatible with XP95 and Discovery addressable fire alarm systems. Supplied on an isolating 4\" base (EN54‑17), the device offers selectable tones, two volume settings and integrated short‑circuit isolation for reliable operation in commercial and light industrial installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoop‑powered:\u003c\/strong\u003e no external PSU required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelectable tones:\u003c\/strong\u003e Apollo, Slow Whoop, DIN; synchronised tones supported\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo volume levels:\u003c\/strong\u003e 92 dB(A) and 100 dB(A) selectable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated isolator:\u003c\/strong\u003e built‑in short‑circuit isolator on 4\" isolating base (EN54‑17)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable construction:\u003c\/strong\u003e polycarbonate housing, red, IP65 rated for exposed internal \/ semi‑protected external use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong warranty:\u003c\/strong\u003e 10‑year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases\u003c\/strong\u003e\u003cbr\u003eIdeal for open areas requiring addressable notification such as offices, retail, schools and light industrial sites. Suitable for both new installations and retrofits where XP95\/Discovery systems are used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandards \u0026amp; compliance\u003c\/strong\u003e\u003cbr\u003eDesigned to meet relevant standards (EN54‑3 for sounders; base EN54‑17 for isolators). Installations should follow local regulations and relevant fire safety standards. Check manufacturer certificates for full approval listings (LPCB, VdS, CPR etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; safety\u003c\/strong\u003e\u003cbr\u003eInstallation must be carried out by a competent, qualified electrician or fire system technician. Observe wiring polarity (device is polarity sensitive) and refer to the official Apollo datasheet for tone‑by‑tone current consumption and detailed wiring instructions.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"-","offer_id":56595105218933,"sku":"55000-001APO","price":50.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002880_1.png?v=1768257488"},{"product_id":"apollo-fire-sounder-base-rw1300-160apo","title":"Apollo Fire RW1300-160APO sounder base, Black","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApollo Fire RW1300-160APO is a sounder base from the REACH Wireless range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RW1300-160APO is a wireless analogue addressable sounder base that can be used as a stand-alone notification device (with a blanking cap) or as a combined solution with a REACH Wireless detector.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible only with REACH Wireless\u003c\/li\u003e\n\u003cli\u003e16 tone pairs\u003c\/li\u003e\n\u003cli\u003eFour volume settings\u003c\/li\u003e\n\u003cli\u003eBi-directional wireless communication\u003c\/li\u003e\n\u003cli\u003eDual-channel redundancy\u003c\/li\u003e\n\u003cli\u003eFive-year battery life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the RW1300-160APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57531756773749,"sku":"RW1300-160APO","price":194.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/RW1300-160APO.jpg?v=1787938348"},{"product_id":"apollo-fire-multi-tones-sounder-base-45681-702apo","title":"Apollo Fire 45681-702APO multi-tones sounder base, White","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire 45681-702APO is a multi-tones sounder base from the Discovery range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Discovery Sounder Base is a multifunctional device that incorporates a sounder, a short-circuit isolator within a Discovery mounting base. 15 different tone pairs can be used to signal evacuation and alert. A third selection can be used in instances such as a class hange in Schools.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15 Pairs of Tones\u003c\/li\u003e\n\u003cli\u003eEN54-3 Sounder\u003c\/li\u003e\n\u003cli\u003eMultiple Selectable Output Volumes\u003c\/li\u003e\n\u003cli\u003eEnables soft start option, ideal for hospitals and nursing homes\u003c\/li\u003e\n\u003cli\u003eUnique acoustic and visual indicator self-test\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 45681-702APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57536766706037,"sku":"45681-702APO","price":43.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/45681-702APO.jpg?v=1788201655"},{"product_id":"apollo-fire-open-area-sounder-beacon-xpa-cb-14004-apo","title":"Apollo Fire XPA-CB-14004-APO open-area sounder beacon, White","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApollo Fire XPA-CB-14004-APO is an open-area sounder beacon from the Xpander range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XPander Open-Area Sounder VID is wireless and designed to be used with XPander detectors and manual call points.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWireless\u003c\/li\u003e\n\u003cli\u003eBi-directional (monitored) radio platform\u003c\/li\u003e\n\u003cli\u003eChoice of 32 selectable tones\u003c\/li\u003e\n\u003cli\u003eAudible self-test available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput is between 92 and 106db\u003c\/strong\u003e(A) at 1m – dependent on tone setting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the XPA-CB-14004-APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57536948076917,"sku":"XPA-CB-14004-APO","price":338.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/XPA-CB-14004-APO.jpg?v=1788211523"},{"product_id":"apollo-fire-sounder-beacon-base-45681-394mar","title":"Apollo Fire 45681-394MAR sounder beacon base, White","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApollo Fire 45681-394MAR is a sounder beacon base from the Discovery range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Discovery Marine Sounder Visual Indicator Base makes full use of the Discovery protocol. For ease of commissioning, a ‘Magnetic Wand’ can be used to test and adjust each sounder locally.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolume and tone settings can be selected from the control panel\u003c\/li\u003e\n\u003cli\u003eElectronic bell tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 45681-394MAR part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57548735971701,"sku":"45681-394MAR","price":116.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/45681-394MAR.jpg?v=1788533082"},{"product_id":"apollo-fire-sounder-vad-base-rw1300-260apo","title":"Apollo Fire RW1300-260APO sounder VAD base, Black","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApollo Fire RW1300-260APO is a sounder VAD base from the REACH Wireless range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RW1300-260APO is a wireless analogue addressable sounder VAD bases that can be used as a stand-alone notification device (with a blanking cap) or as a combined solution with a REACH Wireless detector.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible only with REACH Wireless\u003c\/li\u003e\n\u003cli\u003e16 tone pairs\u003c\/li\u003e\n\u003cli\u003eFour volume settings\u003c\/li\u003e\n\u003cli\u003eBi-directional wireless communication\u003c\/li\u003e\n\u003cli\u003eDual-channel redundancy\u003c\/li\u003e\n\u003cli\u003eFive-year battery life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the RW1300-260APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57549539803509,"sku":"RW1300-260APO","price":292.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/RW1300-260APO.jpg?v=1788546741"},{"product_id":"apollo-fire-sounder-beacon-base-45681-330apo","title":"Apollo Fire 45681-330APO sounder beacon base, White","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire 45681-330APO is a sounder beacon base from the XP95 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElectrical Considerations\u003c\/p\u003e\n\u003cp\u003eThe Sounder Beacon Base is loop-powered, requiring no external power supply. It operates at 17-28V DC and is polarity-sensitive. Mechanical Construction\u003c\/p\u003e\n\u003cp\u003eThe Sounder Beacon Base is moulded in polycarbonate and has stainless steel contacts that accept solid or stranded cables of up to 2.5mm². Application\u003c\/p\u003e\n\u003cp\u003eThe low volume range is useful in areas such as hospitals where a fire alert is initially intended to warn staff only. The sounder can be set to the high range for general use. Synchronisation of tones ensures the integrity of the signal—tones from different sounders do not merge into one signal that could be mistaken for a different tone.\u003c\/p\u003e\n\u003cp\u003eGroup addressing is a simple method of alerting an entire area or group of rooms without delay. For systems requiring isolators at every point, the built-in isolator saves installation time and cost. The acoustic self-test means that the sounder listens to itself when it is switched on.\u003c\/p\u003e\n\u003cp\u003eIf no sound is detected, a fault signal is transmitted when the sounder is polled. The beacon self-test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the sounder beacon base is switched on, a fault signal is transmitted when the device is next polled.\u003c\/p\u003e\n\u003cp\u003eAddressing\u003c\/p\u003e\n\u003cp\u003eThe Sounder Beacon Base responds to its own individual address set with a DIL switch. It also responds both to a group address, set by means of a 4-segment DIL switch, and to a synchronisation address which is embedded in the unit. Addresses 1 to 111 are used exclusively for individual addresses; addresses 112 to 126 are used for group addressing.\u003c\/p\u003e\n\u003cp\u003eAny Sounder Beacon Base on a loop may be freely assigned to a group. The address for any group must be chosen from the range 112-126. Addresses 112-126 may be used as individual addresses, but only if the 4-segment DIL switch is not used, i.e., group addressing is disabled.\u003c\/p\u003e\n\u003cp\u003eIf the 4-segment DIL switch is set to any number other than the default 127, a pre-set analogue value of 4 would be transmitted to indicate a fault. The Sounder Beacon Bases are normally polled by the individual address. If more than one Sounder Beacon Base is activated, it is possible for the sounders to be synchronised with each other.\u003c\/p\u003e\n\u003cp\u003eGroup Addressing\u003c\/p\u003e\n\u003cp\u003eIt may be desirable, in alarm conditions, to switch more than one Sounder Beacon Base simultaneously. To enable this, devices may be controlled as a group and given a group address common to all sounder beacon bases in the group. When a device recognises its group address, it will process the output bits but will not return any data to the control panel on that address.\u003c\/p\u003e\n\u003cp\u003eIf it is required to confirm the status of the outputs of devices under group address control, it is necessary to interrogate all devices in the group at their individual addresses. Backward Compatibility\u003c\/p\u003e\n\u003cp\u003eThe Sounder Beacon Bases will operate only with control equipment using the Apollo XP95 or Discovery protocol. The features of the Sounder Beacon Base are available only when it is connected to a control panel with the appropriate software. Product Information\u003c\/p\u003e\n\u003cp\u003eThe Sounder Visual Indicator Base is a loop-powered sounder and visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-Tone EN54-3 Sounder\u003c\/li\u003e\n\u003cli\u003eSelectable Volumes 55–75dB (A), 75–91dB (A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisual Indicator Beacon\u003c\/strong\u003e (Red-Flash)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 45681-330APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558546186613,"sku":"45681-330APO","price":57.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/45681-330APO.jpg?v=1788878730"},{"product_id":"apollo-fire-addressable-sounder-base-45681-700apo","title":"Apollo Fire 45681-700APO addressable sounder base, White","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire 45681-700APO is an addressable sounder base from the Discovery range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiscover the Apollo 45681-700APO from the Discovery Series, an isolating addressable sounder beacon base designed for indoor use. This device meets EN54-3 compliance and features a distinctive white flash and body. With a flash rate of 0.5Hz and the ability to customize the sounder's volume directly from the panel, it ensures effective alerting while allowing for tailored sound settings.\u003c\/p\u003e\n\u003cp\u003ePerfect for environments requiring reliable and adjustable alert systems. Enhance your safety measures with Apollo Fire's trusted technology. Don't wait, secure your space today!\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlash rate of 0.5Hz\u003c\/li\u003e\n\u003cli\u003eIt is possible to set individual volume of the sounder from the panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 45681-700APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558550380917,"sku":"45681-700APO","price":77.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/45681-700APO.jpg?v=1788878796"},{"product_id":"apollo-fire-sounder-vad-base-45681-707apo","title":"Apollo Fire 45681-707APO sounder VAD base, White","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire 45681-707APO is a sounder VAD base from the XP95 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEN 54-23 Certified Category O VAD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.5Hz Flash Rate\u003c\/strong\u003e (white)\u003c\/li\u003e\n\u003cli\u003eSynchronisation of ‘alert’ and ‘evacuate’ tones\u003c\/li\u003e\n\u003cli\u003eSynchronisation of visual indicator flash\u003c\/li\u003e\n\u003cli\u003eIndividual and group addressing\u003c\/li\u003e\n\u003cli\u003eUnique acoustic and VAD self-test\u003c\/li\u003e\n\u003cli\u003eBuilt-in isolator\u003c\/li\u003e\n\u003cli\u003eEN 54-3 Certified Sounder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 45681-707APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558550544757,"sku":"45681-707APO","price":112.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/45681-707APO.jpg?v=1788878815"},{"product_id":"apollo-fire-open-area-multi-tone-sounder-55000-274apo","title":"Apollo Fire 55000-274APO open-area multi-tone sounder, Red","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire 55000-274APO is an open-area multi-tone sounder from the XP95 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XP95 Open-Area Multi-Tone Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpdated to include choice of tones\u003c\/strong\u003e: Apollo, slow whoop and DIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo volume settings 92dB\u003c\/strong\u003e(A) and 100dB(A)\u003c\/li\u003e\n\u003cli\u003eSynchronisation of tones\u003c\/li\u003e\n\u003cli\u003eIndividual and group addressing\u003c\/li\u003e\n\u003cli\u003eLoop Powered\u003c\/li\u003e\n\u003cli\u003eIP66 rated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 55000-274APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558651076981,"sku":"55000-274APO","price":143.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/55000-274APO.jpg?v=1788880392"},{"product_id":"apollo-fire-multi-tone-sounder-beacon-55000-294apo","title":"Apollo Fire 55000-294APO multi-tone sounder beacon, White","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire 55000-294APO is a multi-tone sounder beacon from the XP95 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XP95 Open-Area Multi-Tone Sounder VID is designed for use in indoor open areas and can be connected to any Discovery or XP95 system.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo volume settings 92dB\u003c\/strong\u003e(A) and 100dB(A)\u003c\/li\u003e\n\u003cli\u003eSynchronisation of'alert' and'evacuate' tones\u003c\/li\u003e\n\u003cli\u003eIndividual and group addressing\u003c\/li\u003e\n\u003cli\u003eBuilt in isolator\u003c\/li\u003e\n\u003cli\u003eIP21C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 55000-294APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558652715381,"sku":"55000-294APO","price":117.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/55000-294APO.jpg?v=1788880421"},{"product_id":"apollo-fire-multi-tone-sounder-beacon-55000-299apo","title":"Apollo Fire 55000-299APO multi-tone sounder beacon, White","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire 55000-299APO is a multi-tone sounder beacon from the XP95 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElectrical Description\u003c\/p\u003e\n\u003cp\u003eThe Multi-tone Open-Area Alarm Devices are powered directly from the loop and need no external power supply. They operate at 18 -28V DC and are polarity sensitive. Operation\u003c\/p\u003e\n\u003cp\u003eSynchronisation of the tones ensures the integrity of the signal - tones from different sounders do not merge into one signal that could be mistaken for a different tone. A nominal sound output of 100dB(A) is achieved at a current consumption of 5mA in the case of the sounder and 9mA for the sounder beacon. Many control panels will be able to drive up to 20 sounders per loop on average.\u003c\/p\u003e\n\u003cp\u003eThe maximum number of sounders that may be connected to a particular loop should, however, be determined by a loop loading calculation using the Apollo Loop Calculator. Since the Multi-tone Open-Area Alarm Devices are intended for use in open areas, it is possible for more than one sounder to be audible at any given point in a building. For this reason, the operation of all the sounders may be synchronised by sending address '0' in exactly the same way as for the XP95 Sounder Control Unit.\u003c\/p\u003e\n\u003cp\u003eNot only that, the Multi-tone Open-Area Alarm Devices can be assigned group addresses as well as individual addresses, so that the functional options of the sounder are identical with those of the Sounder Control Unit. Mechanical Construction\u003c\/p\u003e\n\u003cp\u003eThe Multi-tone Open-Area Alarm Devices are fitted to the mounting surface with four screws. The weatherproof versions have an additional square backbox and there are three drill centre points for cable entry marked on the upper and lower face. Device Addressing\u003c\/p\u003e\n\u003cp\u003eThe Multi-tone Open-Area Alarm Devices responds to their own individual address set with a DIL switch. They can also respond to a 'Group Address' which allows multiple sounders to be controlled simultaneously. A group address may be any spare address between 112 and 126 and is selected by means of a 4 segment DIL switch.\u003c\/p\u003e\n\u003cp\u003eAn Alarm Device under group address control must have an individual address between 1 and 111 otherwise a fault value of 4 is transmitted. Alarm Devices not using the group address facility may be addressed at any address (1-126). Backward Compatibility\u003c\/p\u003e\n\u003cp\u003eThe devices will operate only with control equipment using the Apollo XP95 or Discovery protocol. The features of the Multi-tone Open-area Alarm Devices are available only when the sounder is connected to a control panel with the appropriate software. Product Information\u003c\/p\u003e\n\u003cp\u003eThe Weatherproof Multi-Tone Open-Area Sounder Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollo's intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoice of tones on standard device\u003c\/strong\u003e: Apollo, Slow Whoop, and DIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Volume settings 92dB\u003c\/strong\u003e(A) and 100dB(A)\u003c\/li\u003e\n\u003cli\u003eSynchronisation of'alert' and'evacuate' tones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 55000-299APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558654157173,"sku":"55000-299APO","price":201.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/55000-299APO.jpg?v=1788880433"},{"product_id":"apollo-fire-open-area-voice-sounder-58000-010apo","title":"Apollo Fire 58000-010APO open-area voice sounder, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApollo Fire 58000-010APO is an open-area voice sounder from the Discovery range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrand Information\u003c\/p\u003e\n\u003cp\u003eDiscovery® is a range of high-specification, analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms. Drift compensation further reduces the likelihood of false alarms caused by a build-up of dust in the sensing chamber.\u003c\/p\u003e\n\u003cp\u003eIn addition to the familiar smoke and heat detectors, the Discovery range features two multisensor detectors. One is an optical\/heat multisensor which can be used to protect against many types of fire risk. The other is a carbon monoxide\/heat multisensor which protects against both smouldering fires and those generating heat.\u003c\/p\u003e\n\u003cp\u003eApplication\u003c\/p\u003e\n\u003cp\u003eThe Discovery Open-Area Voice Sounders are used to provide audible and visual warning of a fire condition and are controlled by the fire control panel by means of the Discovery protocol. This particular feature is only available when being controlled by the full Discovery or CoreProtocol, with the fire control panel programmed accordingly. Information on available features should be requested from the panel manufacturer.\u003c\/p\u003e\n\u003cp\u003eThe Discovery Open-Area Voice Sounders offer a choice of 15 evacuation tone\/messages pairs available in each device. One of these tone\/messages is selected during commissioning in order to suit local regulations or customs. A fire alarm test message is also available.\u003c\/p\u003e\n\u003cp\u003eWhichever evacuation tone\/message is selected there is a secondary tone\/message which may be used for alerting or warning of a possible evacuation. Communication\u003c\/p\u003e\n\u003cp\u003eDiscovery, XP95 \u0026amp; CoreProtocol compatible\u003c\/p\u003e\n\u003cp\u003eMaintenance \u0026amp; Service\u003c\/p\u003e\n\u003cp\u003eDetectors should be maintained according to BS 5839-1 or other locally applicable code. Test equipment can be ordered from Apollo for testing smoke and heat detectors. Detectors should not be cleaned in the field except for careful removal of exterior dirt with a damp cloth.\u003c\/p\u003e\n\u003cp\u003eEMC Directive 2014\/30\/EU\u003c\/p\u003e\n\u003cp\u003eThe product complies with the essential requirements of the EMC Directive 2014\/30\/EU, provided that it is used as described. Construction products regulation 305\/2011\u003c\/p\u003e\n\u003cp\u003eThe product complies with the essential requirements of the Construction Products Regulation 305\/2011. Product Information\u003c\/p\u003e\n\u003cp\u003eDiscovery Open-Area Voice Sounders comprise a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They are loop powered wall mounted devices.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour pre-set message pairs\u003c\/li\u003e\n\u003cli\u003eCapable of up to 15 tone message pairs\u003c\/li\u003e\n\u003cli\u003eLow current and high volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 58000-010APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558683976053,"sku":"58000-010APO","price":157.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/58000-010APO.jpg?v=1788880893"},{"product_id":"apollo-fire-open-area-voice-sounder-58000-020apo","title":"Apollo Fire 58000-020APO open-area voice sounder, White","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApollo Fire 58000-020APO is an open-area voice sounder from the Discovery range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiscovery Open-Area Voice Sounders comprise a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They are loop powered wall mounted devices.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour pre-set message pairs\u003c\/li\u003e\n\u003cli\u003eCapable of up to 15 tone message pairs\u003c\/li\u003e\n\u003cli\u003eLow current and high volume\u003c\/li\u003e\n\u003cli\u003eFully synchronised\u003c\/li\u003e\n\u003cli\u003eSet up and test at point of installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 58000-020APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558685385077,"sku":"58000-020APO","price":157.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/58000-020APO.jpg?v=1788880917"},{"product_id":"apollo-fire-voice-sounder-beacon-58000-030apo","title":"Apollo Fire 58000-030APO voice sounder beacon, Red","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire 58000-030APO is a voice sounder beacon from the Discovery range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiscovery Open-Area Voice Sounders comprise a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They are loop powered wall mounted devices.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour pre-set message pairs\u003c\/li\u003e\n\u003cli\u003eCapable of up to 15 tone message pairs\u003c\/li\u003e\n\u003cli\u003eLow current and high volume\u003c\/li\u003e\n\u003cli\u003eFully synchronised\u003c\/li\u003e\n\u003cli\u003eSet up and test at point of installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 58000-030APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57558685909365,"sku":"58000-030APO","price":179.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/58000-030APO.jpg?v=1788880929"},{"product_id":"apollo-fire-open-area-sounder-sa5500-300apo","title":"Apollo Fire SA5500-300APO open-area sounder, Red","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire SA5500-300APO is an open-area sounder from the XP95 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Intelligent Open-Area Sounders work natively across XP95, Discovery and CoreProtocol, offering advanced functionality and performance in open areas.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSits on XPERT base for faster installation and maintenance\u003c\/li\u003e\n\u003cli\u003e7 Configurable volume levels and 15 Tone Pairs\u003c\/li\u003e\n\u003cli\u003eGroup and Global control for faster response times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the SA5500-300APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57559622451573,"sku":"SA5500-300APO","price":44.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/SA5500-300APO.jpg?v=1788903784"},{"product_id":"apollo-fire-open-area-sounder-vid-sa5500-350apo","title":"Apollo Fire SA5500-350APO open-area sounder vid, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApollo Fire SA5500-350APO is an open-area sounder vid from the XP95 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Intelligent Open-Area Sounder VIDs work natively across XP95, Discovery and CoreProtocol, offering advanced functionality and performance in open areas.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSits on XPERT base for faster installation and maintenance\u003c\/li\u003e\n\u003cli\u003e7 Configurable volume levels and 15 Tone Pairs\u003c\/li\u003e\n\u003cli\u003eGroup and Global control for faster response times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the SA5500-350APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57559622877557,"sku":"SA5500-350APO","price":63.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/SA5500-350APO.jpg?v=1788903792"},{"product_id":"apollo-fire-open-area-sounder-vad-sa5501-550apo","title":"Apollo Fire SA5501-550APO open-area sounder VAD","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire SA5501-550APO is an open-area sounder VAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sounder Visual Alarm Devices provide both audible and visual alarm in situations where one alarm type would not suffice, i.e. in a noisy workshop or machine room- or in areas where deaf or hearing-impaired persons may be present.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEN54-3 and EN54-23 Compliant\u003c\/li\u003e\n\u003cli\u003e7 Adjustable volume levels, 15 Tone Pairs, Red or White Flash\u003c\/li\u003e\n\u003cli\u003eBuilt-in controllable Isolator (when used with XPERT 8 Base)\u003c\/li\u003e\n\u003cli\u003eEasy installation on Apollo XPERT 7 or 8 Base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the SA5501-550APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57559623270773,"sku":"SA5501-550APO","price":65.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/SA5501-550APO.jpg?v=1788903844"},{"product_id":"apollo-fire-open-area-sounder-vad-sa5501-551apo","title":"Apollo Fire SA5501-551APO open-area sounder VAD","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire SA5501-551APO is an open-area sounder VAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sounder Visual Alarm Devices provide both audible and visual alarm in situations where one alarm type would not suffice.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudible and visual alarm\u003c\/li\u003e\n\u003cli\u003eCat. W classification\u003c\/li\u003e\n\u003cli\u003eWhite body with red flash\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the SA5501-551APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57559623434613,"sku":"SA5501-551APO","price":65.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/SA5501-551APO.jpg?v=1788903860"},{"product_id":"apollo-fire-combined-sounder-base-xpa-wb-14036-apo","title":"Apollo Fire XPA-WB-14036-APO combined sounder base, White","description":"\u003cp\u003e\u003cstrong\u003eApollo Fire XPA-WB-14036-APO is a combined sounder base from the Xpander range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones, including the Apollo tone, and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWireless\u003c\/li\u003e\n\u003cli\u003eAvailable with a choice of XPander detectors\u003c\/li\u003e\n\u003cli\u003eBi-directional (monitored) radio platform\u003c\/li\u003e\n\u003cli\u003eA choice of four tone pairs\u003c\/li\u003e\n\u003cli\u003eCertified to EN 54-25.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the XPA-WB-14036-APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57559738089845,"sku":"XPA-WB-14036-APO","price":260.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/XPA-WB-14036-APO.jpg?v=1788909503"},{"product_id":"apollo-fire-sounder-beacon-base-xpa-wb-14037-apo","title":"Apollo Fire XPA-WB-14037-APO sounder beacon base, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApollo Fire XPA-WB-14037-APO is a sounder beacon base from the Xpander range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system.\u003c\/p\u003e\n\u003cp\u003eThe interface communicates with the detection and alarm signalling devices by means of radio waves.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWireless\u003c\/li\u003e\n\u003cli\u003eAvailable with a choice of XPander detectors\u003c\/li\u003e\n\u003cli\u003eBi-directional (monitored) radio platform\u003c\/li\u003e\n\u003cli\u003eA choice of four tone pairs\u003c\/li\u003e\n\u003cli\u003eCertified to EN 54-25.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the XPA-WB-14037-APO part number rather than the description.\u003c\/p\u003e","brand":"Apollo Fire","offers":[{"title":"Default Title","offer_id":57559738909045,"sku":"XPA-WB-14037-APO","price":312.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/XPA-WB-14037-APO.jpg?v=1788909527"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/collections\/apollo_45681-276apo.png?v=1747058487","url":"https:\/\/wmestore.co.uk\/collections\/apollo-sounders.oembed?page=2","provider":"WME","version":"1.0","type":"link"}