{"title":"Fike Products","description":"\u003cp\u003eProtect your property with Fike fire safety solutions, trusted worldwide for advanced detection and reliable protection. From intelligent \u003ca href=\"https:\/\/wmestore.co.uk\/collections\/fike-control-panels\" title=\"Fike Control Panels\"\u003efire alarm panels\u003c\/a\u003e and \u003ca href=\"https:\/\/wmestore.co.uk\/collections\/fike-detectors\" title=\"Fike Detectors\"\u003esmoke detectors\u003c\/a\u003e to complete kits and suppression systems, Fike products are built for fast response and long-term reliability in both residential and commercial environments.\u003c\/p\u003e\n\u003cp\u003eBrowse our full Fike range, including Fike Control Panels, Detectors, \u003ca href=\"https:\/\/wmestore.co.uk\/collections\/fike-kits\" title=\"Fike Kits\"\u003eKits\u003c\/a\u003e, and \u003ca href=\"https:\/\/wmestore.co.uk\/collections\/fike-sounders\" title=\"Fike Sounders\"\u003eSounders\u003c\/a\u003e \u0026amp; Beacons, to create a tailored fire alarm system that keeps you safe and compliant. For expert advice on installation and fire safety regulations, explore our \u003ca href=\"https:\/\/wmestore.co.uk\/blogs\/help-and-support\/the-best-smoke-and-co2-detectors\" title=\"What Are the Best Smoke and CO2 Detectors?\"\u003ehelp \u0026amp; support blog.\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"twinflex-i-o-module-monitored-input-2-changeover-relays-802-0006","title":"Twinflex I\/O Module, Monitored Input \u0026 2 Changeover Relays 802-0006","description":"\u003cp\u003e\u003cstrong\u003eFike Twinflex I\/O Module (802-0006)\u003c\/strong\u003e — a two-wire Twinflex interfacing module providing a monitored input (with selectable EOL supervision) and two changeover relay outputs for interfacing ancillary equipment such as plant shutdown, door releases, ventilation control or auxiliary alarms with a Twinflex zone. Supplied mounted in a standard double-gang back box for flush or surface installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKey features:\u003c\/strong\u003e\n    \u003cul\u003e\n      \u003cli\u003eMonitored input with EOL supervision options (3.3 kΩ and 680 Ω firing resistors).\u003c\/li\u003e\n      \u003cli\u003eTwo changeover (DPCO) relay outputs suitable for switching mains or low-voltage loads (do not mix mains and low-voltage on the same unit outputs simultaneously).\u003c\/li\u003e\n      \u003cli\u003eOnboard DIP switches for input\/output mode, alarm mode and EOL behaviour configuration.\u003c\/li\u003e\n      \u003cli\u003eLED indicators for Output Active and EOL\/Input status.\u003c\/li\u003e\n      \u003cli\u003eSupplied mounted in a standard double-gang back box for quick installation.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUse cases:\u003c\/strong\u003e Interface modules for addressable Twinflex fire panels — suitable for installers and contractors needing monitored inputs or programmable relay outputs for plant control, door release, ventilation or auxiliary alarm signalling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompliance \u0026amp; documentation:\u003c\/strong\u003e Declared performance to EN54-18; Declaration of Performance available. Refer to the Fike installation \u0026amp; maintenance manual for full wiring, DIP-switch settings and the DoP.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety \u0026amp; installation notes:\u003c\/strong\u003e Mains wiring to outputs must be installed by a suitably qualified person. Follow the panel and module installation manual for safe wiring and correct fuse selection; verify panel compatibility (Twinflex Pro \/ Twinflex V3 supported; not compatible with Twinflex SRP).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fike","offers":[{"title":"-","offer_id":56594095735157,"sku":"802-0006","price":52.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002760_1.png?v=1768244799"},{"product_id":"fike-twinflex-pro2-2-zone-fire-alarm-control-panel-en54-2-4-2-12v-3-3ah-505-0002","title":"Fike Twinflex Pro2 2-Zone Fire Alarm Control Panel, EN54-2\/4, 2×12V 3.3Ah, 505-0002","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003eThe Fike TWINFLEXpro² 505-0002 is an intelligent two‑wire fire alarm control panel (2‑zone) engineered for use with Fike Twinflex multipoint detectors and compatible Twinflex devices. It supports mixed device and sounder wiring on a single screened 2‑core cable per zone and includes an integral power supply and comprehensive event logging.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo‑wire TwinflexPro² architecture—devices and sounders on the same pair of wires.\u003c\/li\u003e\n\u003cli\u003e2 zones (505-0002 model); other variants available in 4 and 8 zones.\u003c\/li\u003e\n\u003cli\u003eUp to 32 devices per zone (subject to device loading units).\u003c\/li\u003e\n\u003cli\u003eDistinguishes detector alarms (smoke\/heat) from manual call point activations; checkpoint (alarm confirmation) functionality for dwelling\/communal zoning.\u003c\/li\u003e\n\u003cli\u003e4×20 character LCD and keypad; 500‑event log for history and diagnostics.\u003c\/li\u003e\n\u003cli\u003eOnboard monitored sounder circuits and monitored\/volt‑free relay outputs; programmable inputs\/outputs for peripheral integration.\u003c\/li\u003e\n\u003cli\u003eComplies with EN54‑2 and EN54‑4 (see Fike datasheet for full approvals and compliance details).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical uses\u003c\/strong\u003e\u003cbr\u003eIdeal for small commercial, residential communal areas and light industrial premises where a cost‑effective two‑zone intelligent two‑wire system is required. Suitable for installers and contractors seeking a conventional\/non‑addressable two‑wire solution using Fike Twinflex detectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; safety\u003c\/strong\u003e\u003cbr\u003eRequires two 12 V, 3.3 Ah standby batteries. Install, configure and commission only by a competent person in accordance with the official Fike installation manual and local regulations (eg BS 5839 where applicable). Refer to the Fike datasheet for terminal wiring, zone cable requirements and full electrical ratings.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"-","offer_id":56594549440885,"sku":"505-0002","price":195.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002749_1.png?v=1768247798"},{"product_id":"fike-twinflex-hatari-2-wire-zone-sounder-selectable-tones-high-output-302-0001-302-0002","title":"Fike TWINFLEX Hatari 2-Wire Zone Sounder, Selectable Tones, High Output, 302-0001 \/ 302-0002","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003eThe Fike TWINFLEX Hatari is a standalone 2‑wire zone‑powered fire alarm sounder for use on TWINFLEX two‑wire systems. It offers selectable tones and volume modes, anti‑tamper bayonet locking and a high output option suitable where extra audibility is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for TWINFLEX 2‑wire systems (V3 \/ Pro \/ Pro²).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelectable tones \u0026amp; volume:\u003c\/strong\u003e DIP switches provide multiple tone\/pattern options, End‑Of‑Line (EOL) selection and high\/low output selection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh audible output:\u003c\/strong\u003e Documented 90+ dB(A) @ 1 m (Dual Tone); some modes\/listings reference up to 100 dB(A).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow current draw:\u003c\/strong\u003e Zone‑powered with low quiescent and alarm currents for efficient panel loading.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Quick bayonet fit with locking front and fixed wiring base; deep base available. Anti‑tamper removal requires a tool.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndoor use:\u003c\/strong\u003e Intended for internal building installation as part of a life‑safety fire alarm system. Confirm IP \/ environmental suitability for your location against the exact datasheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases\u003c\/strong\u003e\u003cbr\u003eIdeal for installations on TWINFLEX panels where a compact zone‑powered sounder is required. Suited to both contractor and DIY trade environments when installed by a competent person. Use the high output mode where additional audibility is required or where detection devices are not fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; safety\u003c\/strong\u003e\u003cbr\u003eDeclared Performance references indicate EN54‑3 compatibility (see Fike documentation). Confirm the exact model datasheet for operating temperature, IP rating and declared performance for your installation. Installation must comply with local regulations and BS 5839 (or applicable national standards); wiring and final commissioning should be carried out by a qualified installer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Some technical values (dimensions, temperature range, IP rating) vary between Fike documents. Confirm the exact part code datasheet (302‑0001 red \/ 302‑0002 white) for final selection and installation.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"-","offer_id":56594726650229,"sku":"302-0001","price":19.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002759_1.png?v=1768249002"},{"product_id":"fike-twinflexpro2-8-zone-twinflex-two-wire-fire-alarm-control-panel-505-0008","title":"Fike TwinflexPro2 8-Zone Twinflex Two-Wire Fire Alarm Control Panel 505-0008","description":"\u003cp\u003eThe Fike TwinflexPro2 8‑Zone control panel (505-0008) is an intelligent two‑wire fire alarm control panel using Fike's Twinflex protocol. Designed to reduce cabling and installation time, Twinflex allows detectors, call points and sounders to share a single 2‑core screened cable per zone. The panel includes an integrated mains PSU, programmable alarm confirmation\/delay, day\/night modes and a 500‑event log. It supports up to 32 Twinflex devices per zone and can be expanded or linked to repeaters or conventional devices with optional cards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 onboard detection zones; supports up to 32 devices per zone.\u003c\/li\u003e\n  \u003cli\u003eTwinflex two‑wire architecture — detectors and sounders on same circuit (single 2‑core screened cable).\u003c\/li\u003e\n  \u003cli\u003e4 × 20 character LCD with highlighted menus for straightforward operation.\u003c\/li\u003e\n  \u003cli\u003eEvent log up to 500 entries; day\/night modes; alarm confirmation and delays.\u003c\/li\u003e\n  \u003cli\u003eTwo monitored\/conventional sounder outputs, volt‑free common fire and fault relays; RS‑485 for repeaters.\u003c\/li\u003e\n  \u003cli\u003eIntegral mains PSU; requires external 2 × 12 V sealed lead‑acid standby batteries (e.g. 2 × 3.2 Ah typical).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases:\u003c\/strong\u003e Ideal for small to medium commercial and light industrial installations where reduced cabling and straightforward commissioning save time and cost. Suitable for installers and contractors seeking an EN54‑compatible, expandable two‑wire solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; safety:\u003c\/strong\u003e Commonly listed as compliant with EN54‑2 and EN54‑4 (CPR). Installations should use appropriately certified devices and comply with local regulations. Installation and battery sizing must be performed by a qualified engineer; consult the official Fike TwinflexPro2 datasheet and Declaration of Performance for exact ratings and certification details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Some vendor pages list varying current limits for sounder\/zone circuits and optional expansion configurations — refer to the official datasheet for exact electrical ratings for your planned configuration.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"-","offer_id":56594991513973,"sku":"505-0008","price":305.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002751_1.png?v=1768254368"},{"product_id":"fike-twinflexpro2-2-zone-fire-alarm-kit-twinflex-two-wire-604-0002","title":"Fike TwinflexPro2 2-Zone Fire Alarm Kit, Twinflex Two-Wire, 604-0002","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fike 604-0002 TwinflexPro2 2‑Zone Fire Alarm Kit is a contractor boxed kit for small installations. It uses Fike's Twinflex two‑wire architecture so detectors, manual call points and sounders can share the same two‑core zone wiring — reducing cable runs and labour while providing a near‑complete system out of the box.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKit contents:\u003c\/strong\u003e 1× TwinflexPro2 2‑zone control panel (505‑0002), 7× Twinflex Multipoint detectors (204‑0001) with integral sounder option, 2× manual call points (402‑0006) with covers, 1× detector head removal tool (25‑0046‑201).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKey features:\u003c\/strong\u003e Twinflex two‑wire design; selectable multi‑mode detection (3 smoke modes, 2 heat modes, rate‑of‑rise and combination modes); Checkpoint alarm confirmation; RS485 repeater support; comprehensive fault monitoring; integral PSU with battery backup.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUse cases:\u003c\/strong\u003e Small commercial premises, small residential installations, contractor installs requiring a compact boxed kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRefer to the official Fike datasheets and engineer manuals for detailed installation, wiring and commissioning instructions (see Fike product documents).\u003c\/li\u003e\n  \u003cli\u003eCheck local approval requirements (CE\/UKCA\/NFPA) and applicable standards for your market before installation.\u003c\/li\u003e\n  \u003cli\u003eInstaller note: panel includes an integral PSU; batteries are typically required for standby (commonly listed as 2×12 V 3.2 Ah). Ensure correct battery fitment and commissioning as per Fike guidance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fike","offers":[{"title":"-","offer_id":56595092865397,"sku":"604-0002","price":466.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002752_1.png?v=1768256700"},{"product_id":"twinflexpro-two-wire-8-zone-fire-alarm-kit-7-asd-sounder-detectors-2-call-points-604-0008","title":"TwinflexPro² Two-Wire 8-Zone Fire Alarm Kit, 7 ASD Sounder Detectors \u0026 2 Call Points 604-0008","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003eThe TwinflexPro² 604‑0008 boxed contractor kit is an 8‑zone two‑wire conventional fire alarm solution built around Twinflex Multipoint ASD detectors and the TwinflexPro² control panel. The system supports detectors, manual call points and sounders on a single two‑wire zone circuit to reduce installation time and cable runs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo‑wire (single pair) zone wiring supporting detectors, sounders and call points on the same circuit\u003c\/li\u003e\n\u003cli\u003eAlarm confirmation \/ checkpoint technology for programmable pre‑alarm verification\u003c\/li\u003e\n\u003cli\u003e4×20 character backlit LCD with highlighted menu navigation and an event log of up to 500 events\u003c\/li\u003e\n\u003cli\u003eMultipoint detectors with 7 selectable detection modes (3 smoke, 2 heat, rate‑of‑rise, combined smoke\/heat)\u003c\/li\u003e\n\u003cli\u003eRS‑485 interface for up to 8 repeater panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat’s included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × TwinflexPro² 8‑zone control panel (panel model referenced as 505‑0008)\u003c\/li\u003e\n\u003cli\u003e7 × Twinflex Multipoint ASD detectors with integral sounder\u003c\/li\u003e\n\u003cli\u003e2 × Twinflex manual call points\u003c\/li\u003e\n\u003cli\u003e1 × detector head removal tool\u003c\/li\u003e\n\u003cli\u003eNote: panel requires 2 × 12 V sealed lead acid backup batteries (commonly 3.2–3.3 Ah) which are not always supplied with boxed kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eUse cases\u003c\/strong\u003e\u003cbr\u003eIdeal for domestic, multi‑dwelling or small commercial communal installations where reduced wiring and clear alarm verification routines are beneficial. Suitable for contractors and installers seeking a compact 8‑zone boxed solution with integral logging and repeater capability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; installation\u003c\/strong\u003e\u003cbr\u003eRefer to the official Fike TwinflexPro² datasheet and installation manual for region‑specific certifications, EN54\/CPR\/UKCA markings and full wiring\/commissioning instructions. Installation must be carried out by competent, certified personnel in accordance with local fire safety regulations and BS\/EN standards where applicable.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"-","offer_id":56595093487989,"sku":"604-0008","price":565.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002754_1.png?v=1768256757"},{"product_id":"fike-twinflexpro2-4-zone-twinflex-fire-alarm-panel-en54-505-0004","title":"Fike TwinflexPro2 4-Zone Twinflex Fire Alarm Panel EN54 505-0004","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003eThe Fike TwinflexPro2 (505‑0004) is a compact, intelligent 2‑wire (Twinflex) 4‑zone fire alarm control panel designed for smaller commercial and residential installations. It supports a single screened 2‑core per zone for both detection and sounder circuits, reducing cable runs and installation cost.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 onboard zones; supports up to 32 Twinflex devices per zone.\u003c\/li\u003e\n  \u003cli\u003eAutomatically distinguishes detector alarms (smoke\/heat) from manual call‑point activations.\u003c\/li\u003e\n  \u003cli\u003e4×20 character LCD and keypad for local configuration and status indication.\u003c\/li\u003e\n  \u003cli\u003e500‑event log, programmable day\/night modes, alarm confirmation and delay programming.\u003c\/li\u003e\n  \u003cli\u003eTwo monitored configurable sounder outputs, volt‑free fire and fault relays and monitored inputs.\u003c\/li\u003e\n  \u003cli\u003eRS‑485 communications for up to 8 repeater panels.\u003c\/li\u003e\n  \u003cli\u003eIntegral EN54‑compliant power supply; requires 2 × 12V 3.2Ah batteries for standard standby (optional larger battery enclosures available).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose this panel?\u003c\/strong\u003e\u003cbr\u003eThe Twinflex two‑wire architecture reduces installation time and materials by allowing detection and alarm circuits on a single screened 2‑core per zone. The panel is suited to small commercial sites, shops, offices and multi‑occupancy residential installations where a compact, standards‑referenced conventional panel is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; installation\u003c\/strong\u003e\u003cbr\u003eFike documentation references EN54 and CPR standards — consult the supplied datasheet\/Declaration of Performance for full certification details. Installation, configuration and testing should be carried out by a competent fire alarm engineer in accordance with applicable UK standards (eg BS 5839 series) and local regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety \u0026amp; battery\u003c\/strong\u003e\u003cbr\u003eThe unit requires two 12V 3.2Ah standby batteries (not supplied) for typical 72‑hour standby. For extended standby or larger systems, use the optional external battery enclosure. Ensure batteries are connected per the manufacturer instructions and replaced as recommended.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"-","offer_id":56595187106165,"sku":"505-0004","price":236.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM002750_1.png?v=1768260429"},{"product_id":"fike-sounder-strobe-326-0021-r","title":"Fike 326\/0021-R sounder\/strobe, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 326\/0021-R is a sounder\/strobe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sita Sounder\/Strobe unit allows for audible and visual indication when the system enters an alarm condition. This is an addressable unit that attaches to the loop. Digital communication technology to the control panel is implemented allowing for accurate data transfer at high transmission speeds.\u003c\/p\u003e\n\u003cp\u003eThis device is only compatible with the Sita 200+, Duonet and Quadnet ranges of control panels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e88dB Sounder Output\u003c\/li\u003e\n\u003cli\u003e3 Sound Patterns\u003c\/li\u003e\n\u003cli\u003eRed Lens Visual Indicator\u003c\/li\u003e\n\u003cli\u003eIncludes Low Profile Base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 326\/0021-R part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57529554305397,"sku":"326\/0021-R","price":99.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/326-0021-R.jpg?v=1787865417"},{"product_id":"fike-smoke-detector-205-0012","title":"Fike 205-0012 smoke detector, White","description":"\u003cp\u003e\u003cstrong\u003eFike 205-0012 is a smoke detector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. The detectors can be matched to the environment in which they are installed and changed at any time during the lifetime of the installation.\u003c\/p\u003e\n\u003cp\u003eThe mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module (configurable via commissioning software on addressable systems). All modes comply with European detector type specifications. The Addressable ASD detector offers multiple choices for detection, set to a single mode or a combination, for a choice of up to 15 different settings.\u003c\/p\u003e\n\u003cp\u003eProgrammable via a PC or at the panel (Quadnet and Duonet only) and also has an in-built loop isolator as well as I\/O for local control and switching. The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder, where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings.\u003c\/p\u003e\n\u003cp\u003eAll Multipoint ASD detectors have the option of an integral combined strobe.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFast short circuit isolator in every device\u003c\/li\u003e\n\u003cli\u003e15 combinations of smoke \u0026amp; heat detection modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti stage alarms\u003c\/strong\u003e - pre alarm feature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 sound patterns\u003c\/strong\u003e - plus off, 3 different volume settings - if using Sita\u003c\/li\u003e\n\u003cli\u003eMultipoint with integral sounder\u003c\/li\u003e\n\u003cli\u003eAuxiliary digital inputs and outputs are available at any Addressable\u003c\/li\u003e\n\u003cli\u003eMultipoint device\u003c\/li\u003e\n\u003cli\u003eAutomatic continuous self-calibration\u003c\/li\u003e\n\u003cli\u003eFast short circuit isolator in every device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 205-0012 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57530145112437,"sku":"205-0012","price":83.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/205-0012.jpg?v=1787905465"},{"product_id":"fike-sounder-strobe-f0296337","title":"Fike F0296337 sounder strobe","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike F0296337 is a sounder strobe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAllows for audible indication when a fire alarm system enters a fire alarm condition.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Twinflex Control Panels\u003c\/li\u003e\n\u003cli\u003eCan be installed on the same zone as the Twinflex ASD Detedtors and assocaited devices\u003c\/li\u003e\n\u003cli\u003e2 wire zone powered sounder compatible with the Twinflex 2 Wire range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the F0296337 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57530189054325,"sku":"F0296337","price":101.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/F0296337.jpg?v=1787906651"},{"product_id":"fike-smoke-detector-204-0003","title":"Fike 204-0003 smoke detector, White","description":"\u003cp\u003e\u003cstrong\u003eFike 204-0003 is a smoke detector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing the Multipoint ASD detector as part of the TWINFLEXpro² system means that when a detector is wired to the system, a sounder and strobe can also be connected without extra installation time or cost. This greatly reduces the number of points that need to be installed and the time it takes to install. As the Multipoint ASD offers seven different modes of detection, the installation is made even simpler since one device suits all applications.\u003c\/p\u003e\n\u003cp\u003eWhatever type of detection is required, it can be selected by the flick of a switch at the time of commissioning: three different smoke modes, two fixed temperature heat modes, a rate of rise mode and a combination smoke or heat mode. As the Multipoint ASD detector is available with or without a full specification integral 90dBA sounder, no extra devices need to be purchased when audible warning is required. If extra sound is required or for areas that do not require detection, then a choice of several different standalone sounders or sounder beacons can be used on the same two wires.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe detector has 7 modes of detection (3 x smoke detection modes, 3 x heat detection modes \u0026amp; 1 x combination mode.)\u003c\/li\u003e\n\u003cli\u003eMultipoint saves the cost of a sounder\u003c\/li\u003e\n\u003cli\u003eWarning of head contamination, before going into false alarm\u003c\/li\u003e\n\u003cli\u003eEasily removable for maintenance at height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 204-0003 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57530262749557,"sku":"204-0003","price":40.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/204-0003.jpg?v=1787909791"},{"product_id":"fike-smoke-alarm-205-0001","title":"Fike 205-0001 smoke alarm, White","description":"\u003cp\u003e\u003cstrong\u003eFike 205-0001 is a smoke alarm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. The detectors can be matched to the environment in which they are installed and changed any time during the lifetime of the installation.\u003c\/p\u003e\n\u003cp\u003eThe mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module (configurable via commissioning software on addressable systems). All modes are compliant with European detector type specifications. The Addressable ASD detector offers multiple choices for detection, set to a single mode or a combination, for a choice of up to 15 different settings.\u003c\/p\u003e\n\u003cp\u003eProgrammable via a PC or at the panel (Quadnet and Duonet only) and also has an in-built loop isolator as well as I\/O for local control and switching. The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder, where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings.\u003c\/p\u003e\n\u003cp\u003eAll Multipoint ASD detectors have the option of an integral combined strobe. Modes of Detection\u003c\/p\u003e\n\u003cp\u003eSmoke 1:  Used where ionisation detectors are normally fitted, especially when there are high ceilings or a risk of free burning fires (chemical stores etc.) or fires that need to be detected extremely quickly. Smoke 2: Used where optical detectors are normally fitted, when there is a risk of a smouldering fire and for escape routes. Smoke 3:  Designed for use in areas that are prone to nuisance alarms.\u003c\/p\u003e\n\u003cp\u003eThe reduced sensitivity linked with a time delay feature, means that a higher concentration of smoke needs to be present for a constant time period, before a fire decision is made. For example, this setting is ideal for hotel bedrooms with en-suite shower rooms. Heat 2 (Standard Fixed Temperature – 58ºC approx.): Used where a standard fixed temperature heat detector would normally be fitted, suitable for kitchens etc.\u003c\/p\u003e\n\u003cp\u003eHeat 3 (High Fixed Temperature – 90ºC approx.): Used where a high fixed temperature heat detector would normally be fitted. Suitable for commercial kitchens, boiler rooms etc.To ensure the detection capabilities of the detectors are never compromised they self-calibrate every 6 hours. They also continuously monitor for dust contamination until, depending on the environment, it reaches a point where the chamber becomes saturated.\u003c\/p\u003e\n\u003cp\u003eBefore this can develop into a false alarm situation, the panel will indicate that the device in question requires attention.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFast short circuit isolator in every device\u003c\/li\u003e\n\u003cli\u003e15 combinations of smoke \u0026amp; heat detection modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti stage alarms\u003c\/strong\u003e - pre alarm feature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 sound patterns\u003c\/strong\u003e - plus off, 3 different volume settings - if using Sita\u003c\/li\u003e\n\u003cli\u003eMultipoint with integral sounder\u003c\/li\u003e\n\u003cli\u003eAuxiliary digital inputs and outputs are available at any Addressable\u003c\/li\u003e\n\u003cli\u003eMultipoint device\u003c\/li\u003e\n\u003cli\u003eAutomatic continuous self-calibration\u003c\/li\u003e\n\u003cli\u003eFast short circuit isolator in every device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 205-0001 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57531614200181,"sku":"205-0001","price":63.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/205-0001.jpg?v=1787929067"},{"product_id":"fike-sounder-302-0004","title":"Fike 302-0004 sounder, Red","description":"\u003cp\u003e\u003cstrong\u003eFike 302-0004 is a sounder.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Twinflex Hipoint is a standalone IP55 internal\/external horn sounder with 90dB output, three sound patterns, and an inbuilt ‘End of Line’ set by DIL switch. Supplied complete with back box and flush adaptor plate. Suitable for indoor and outdoor use.\u003c\/p\u003e\n\u003cp\u003eThis device is compatible with the Twinflex 2-wire range of fire alarm equipment and is a 2-wire zone-powered sounder. It may be installed on the same zone as the Multipoint detector\/sounder and associated Twinflex devices.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e90+ dB output\u003c\/li\u003e\n\u003cli\u003eDual-tone\u003c\/li\u003e\n\u003cli\u003eZone-powered sounder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 302-0004 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57531619803509,"sku":"302-0004","price":78.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/302-0004.jpg?v=1787929308"},{"product_id":"fike-network-repeater-panel-505-0010","title":"Fike 505-0010 network repeater panel, White","description":"\u003cp\u003e\u003cstrong\u003eFike 505-0010 is a network repeater panel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TWINFLEXpro2 repeater panel is smaller than the TWINFLEXpro2 control panel. It does not connect to or control detection devices. Instead, it connects to a control panel and reports events occurring on the control panel.\u003c\/p\u003e\n\u003cp\u003eIt can also perform system controls over the network (i.e. Silence Alarms, Reset, Sound Alarms \u0026amp; Silence Buzzer). A maximum of 8 repeater panels can be connected to a single control panel.\u003c\/p\u003e\n\u003cp\u003eThe maximum cable length from the control panel to a repeater is 500 metres. If 8 repeaters are used, they must all be within the maximum 500 metres cable length. All external connections are made on the backboard.\u003c\/p\u003e\n\u003cp\u003eThe Ext Switches on the backboard are not currently used and are for future development.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all Twinflex Pro2 control panels\u003c\/li\u003e\n\u003cli\u003eReports Twinflex Pro panel events to a remote location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapable of performing system controls\u003c\/strong\u003e (i.e. Silence Alarms, Reset, Sound Alarms \u0026amp; Silence Buzzer)\u003c\/li\u003e\n\u003cli\u003eMaximum of 8 repeater panels can be connected to a single control panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 505-0010 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57531659551093,"sku":"505-0010","price":234.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/505-0010.jpg?v=1787931556"},{"product_id":"fike-mounting-device-540-0031","title":"Fike 540-0031 mounting device","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 540-0031 is a mounting device.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCIE-A-200 Large Flush Mount Bezel\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor use when replacing a Duonet Panel with a CIA-A-400\u003c\/li\u003e\n\u003cli\u003eCIE A 400 Accessory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 540-0031 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57531660534133,"sku":"540-0031","price":116.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/540-0031.jpg?v=1787931643"},{"product_id":"fike-sounder-f0296336","title":"Fike F0296336 sounder","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike F0296336 is a sounder.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAllows for audible and visual indication when a fire alarm system enters a fire alarm condition.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Twinflex Control Panels\u003c\/li\u003e\n\u003cli\u003eCan be installed on the same zone as the Twinflex ASD Detedtors and assocaited devices\u003c\/li\u003e\n\u003cli\u003e2 wire zone powered sounder and VAD compatible with the Twinflex 2 Wire range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the F0296336 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57531698643317,"sku":"F0296336","price":150.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/F0296336.jpg?v=1787935410"},{"product_id":"fike-sounder-302-0002","title":"Fike 302-0002 sounder, White","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 302-0002 is a sounder.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTWINFLEX Hatari sounders are designed for higher sound output requirements. The standalone Hatari sounder can be used where extra sound output is needed on the zone, or in areas that do not require automatic detection technology. The TWINFLEX Hatari is designed to comply with the European standard EN54 part 3.\u003c\/p\u003e\n\u003cp\u003eField wiring is terminated to fixed connectors in the base, and a \"deep base\" is available separately if required. A bayonet locking mechanism makes the sounder easy to install, and the anti-tamper feature ensures the Hatari is only released using the head removal tool. The TWINFLEX Hatari is available in Red or White to suit any preference and offers variable sound output adjustment.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully Selectable Sounder Output Level\u003c\/li\u003e\n\u003cli\u003e100 dB Output\u003c\/li\u003e\n\u003cli\u003eUpto 6 Per Zone\u003c\/li\u003e\n\u003cli\u003eAnti-tamper Bayonet Locking Mechanism\u003c\/li\u003e\n\u003cli\u003eAvailable Red or White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 302-0002 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57531907113333,"sku":"302-0002","price":53.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/302-0002.jpg?v=1787955267"},{"product_id":"fike-fire-alarm-control-panel-604-0004","title":"Fike 604-0004 fire alarm control panel","description":"\u003cp\u003e\u003cstrong\u003eFike 604-0004 is a fire alarm control panel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA conventional 2-wire fire alarm system is often the natural choice for smaller applications or where budget constraints exist. Fike’s TWINFLEXpro2 2-wire fire alarm system has long been known for its adaptability and cost-effectiveness across a variety of applications, large or small… making it one of the most flexible products on the market. This versatile fire alarm system incorporates Fike’s Twinflex Multipoint ASD using smoke and heat detection with optional built-in sounder, allowing the entire system to be installed using only one pair of wires per zone.\u003c\/p\u003e\n\u003cp\u003eThis means easier, faster installations and cost savings. Building on these strengths and designed for ease of use and state-of-the-art monitoring, the LPCB Approved TwinflexPro2 is the next generation in 2-wire fire alarm reliability.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows detectors and sounders to be installed on the same pair of wires\u003c\/li\u003e\n\u003cli\u003eDifferentiates between call point or detector alarms\u003c\/li\u003e\n\u003cli\u003e4-Line x 20 character LCD display\u003c\/li\u003e\n\u003cli\u003eCheckpoint alarm verification feature\u003c\/li\u003e\n\u003cli\u003eHighlighted selection menu\u003c\/li\u003e\n\u003cli\u003eEvent log storing up to 500 events\u003c\/li\u003e\n\u003cli\u003e3-Enhanced test modes\u003c\/li\u003e\n\u003cli\u003eBuilt-in EOL capability in all devices\u003c\/li\u003e\n\u003cli\u003eZone can be configured to day\/night detection mode\u003c\/li\u003e\n\u003cli\u003eKit includes TwinflexPro2 4 Zone Panel, 7x Twinflex Multipoint ASD with sounder, 2x Twinflex Manual Call Point with covers and Head Removal Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 604-0004 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57531918909813,"sku":"604-0004","price":758.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/604-0004.jpg?v=1787957597"},{"product_id":"fike-sounder-326-0003","title":"Fike 326-0003 sounder, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 326-0003 is a sounder from the Sita range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSounder with 88dB output, three sound patterns and inbuilt short circuit isolator. Supplied complete with red mounting base.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStand-alone sounder\u003c\/li\u003e\n\u003cli\u003e88dB output\u003c\/li\u003e\n\u003cli\u003eSupplied complete with a red mounting base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 326-0003 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57532793586037,"sku":"326-0003","price":76.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/326-0003.jpg?v=1788008286"},{"product_id":"fike-alarm-expansion-accessory-803-0006","title":"Fike 803-0006 alarm expansion \u0026 accessory","description":"\u003cp\u003e\u003cstrong\u003eFike 803-0006 is an alarm expansion \u0026amp; accessory.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis module is an addressable multi-function auxiliary I\/O unit mounted within a standard double gang box. Relay output to provide shutdown facilities with 230V AC 3A rated DPCO relay contacts and monitored input facility.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe module connects to the addressable loop\u003c\/li\u003e\n\u003cli\u003eDPCO relay\u003c\/li\u003e\n\u003cli\u003eMonitored input facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 803-0006 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57533086990709,"sku":"803-0006","price":112.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/803-0006.jpg?v=1788009842"},{"product_id":"fike-expansion-card-505-0006","title":"Fike 505-0006 expansion card","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 505-0006 is an expansion card.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCan only be used with 505-0004 4 Zone Twinflex Pro and Twinflex Pro2 panels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAbility to differentiate between callpoint or detector alarms\u003c\/li\u003e\n\u003cli\u003eCheckpoint alarm verification feature\u003c\/li\u003e\n\u003cli\u003eEvent log storing up to 500 events\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 505-0006 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57534935499125,"sku":"505-0006","price":174.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/505-0006.jpg?v=1788043620"},{"product_id":"fike-remote-indicator-light-600-0092","title":"Fike 600-0092 remote indicator light, Grey","description":"\u003cp\u003e\u003cstrong\u003eFike 600-0092 is a remote indicator light.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured by Fike, this Fike Sita Remote Indication LED 600-0092 is a multifunction LED for connection to most common detectors. Includes inbuilt 10K resistor suitable for Sita Multipoint Detectors. Requires single gang back box.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for the Twinflex ASD Multipoint Detector\u003c\/li\u003e\n\u003cli\u003eComplete with single gang back box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 600-0092 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57534935957877,"sku":"600-0092","price":16.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/600-0092.jpg?v=1788043800"},{"product_id":"fike-fire-alarm-panel-twinflex-8-zone-panel-black","title":"Fike TWINFLEX 8 ZONE PANEL BLACK fire alarm panel","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike TWINFLEX 8 ZONE PANEL BLACK is a fire alarm panel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TWINFLEXpro two wire fire alarm system incorporating the Multipoint ASD combined smoke and heat detector with optional built-in sounder and strobe, allows the whole system to be easily installed using only one pair of wires per zone. Using the Multipoint ASD detector as part of the TWINFLEXpro two wire fire alarm system means that when a detector is wired to the system, a sounder and strobe can also be connected without extra installation time or cost. This greatly reduces the number of points that need to be installed and the time it takes to install.\u003c\/p\u003e\n\u003cp\u003eAs Multipoint ASD offers 7 different modes of detection, the installation is made even simpler since one device suits all applications. Whatever type of detection is required, it can be selected by the flick of a switch at the time of commissioning - 3 different smoke modes, 2 fixed temperature heat modes, a rate of rise mode and a combination smoke or heat mode. As the Multipoint ASD detector is available with or without a full specification integral 90 dBA sounder no extra devices need to be purchased when audible warning is required.\u003c\/p\u003e\n\u003cp\u003eIf extra sound is required or for areas that do not require detection, then a choice of several different standalone sounders, call points or sounder beacons can be used on the same two wires. This versatile system has the ability to differentiate between call point or detector alarm; can accommodate a maximum of 32 devices per zone; has separate fault monitoring display for each zone; and a man walk test facility and zones that can be configured without the need to use resistors or capacitors. To make the TWINFLEXpro system even more flexible, Fike can also provide a special Output Unit.\u003c\/p\u003e\n\u003cp\u003eThis can be situated anywhere on the zone circuit, and is ideal for connecting to plant shutdown, door release mechanisms etc. Repeater panels, which are small remote display units, can be connected to a 4 or 8 zone version 2 TWINFLEX®pro panel via an RS485 data link. A maximum of 8 Repeater Panels can be connected to a single control panel.\u003c\/p\u003e\n\u003cp\u003eRepeater Panels do not connect to or control any devices; they simply report all fire and fault events that occur in the system. They can also perform system actions over the data link (i.e. Silence Alarms, Reset, Sound Alarms and Silence Buzzer).\u003c\/p\u003e\n\u003cp\u003eRepeater Panels are intended to provide display capability at secondary building entrances, nurse's stations and at any location where the panel event information is required to be displayed. Checkpoint Alarm Confirmation Technology\u003c\/p\u003e\n\u003cp\u003eWith the increasing number of new builds, property conversions to flats and bed-sits, and greater pressure on environmental officers to actively enforce the requirements of BS5839 part 6 (the code of practice for fire detection and alarm systems in dwellings), organisations are continually looking for a dependable early warning fire alarm system. The ability to deliver reliable fire detection for these demanding applications, Fike has incorporated Checkpoint Technology into its TWINFLEXpro control panels. What is Checkpoint Technology?\u003c\/p\u003e\n\u003cp\u003eAt the planning stage of installation, fire zones are designated as 'dwelling' for individual rooms or apartments or 'communal' for common areas such as corridors or stairwells. The TWINFLEXpro system has the ability to set a pre-alarm for dwellings, allowing time to investigate the cause of the activation before evacuating the building. This can be programmed between 1 to 5 minutes.\u003c\/p\u003e\n\u003cp\u003eActivation in a communal area will initiate a full alarm immediately. When a fire is detected in a dwelling, only the local (room) sounder will operate during the alarm verification period, to warn the occupants within that particular dwelling.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwinflexPro² 8 zone panels\u003c\/li\u003e\n\u003cli\u003eBlack Panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the TWINFLEX 8 ZONE PANEL BLACK part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57536767459701,"sku":"TWINFLEX 8 ZONE PANEL BLACK","price":508.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/TWINFLEX-8-ZONE-PANEL-BLACK.jpg?v=1788201933"},{"product_id":"fike-flame-detector-fik-uv-ir-as11","title":"Fike FIK-UV-IR-AS11 flame detector","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike FIK-UV-IR-AS11 is a flame detector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUltra-fast detection within 5 milliseconds of fireballs or explosions; the FIK-UV-IR-AS11 detects fires up to 100 ft away for a 1ft n-heptane fire. Quickly identifies hydrocarbon fuel and gas fires. Operates in all weather and light conditions; triple spectrum technology provides immunity to false alarms.\u003c\/p\u003e\n\u003cp\u003eThe UV-IR flame detector provides ultra-fast response, high performance and reliable detection of a wide variety of fires including hydrocarbon fires (visible and non-visible), as well as hydrogen fires. The detector addresses slow-growing fires as well as rapid fire eruptions using improved UV-IR technology. The detector operates in all weather and light conditions.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh immunity to false alarm\u003c\/li\u003e\n\u003cli\u003eHydrogen and Hydrocarbons flame detection.\u003c\/li\u003e\n\u003cli\u003eUltra-fast detection mode detection within 5 milliseconds for fireballs or explosions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh sensitivity\u003c\/strong\u003e – up to 100 ft. (30m) for a 1 ft2 (0.1m2) n-heptane pan fire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData\/Event logger\u003c\/strong\u003e – alarms, faults and other relevant events are logged to non-volatile memory\u003c\/li\u003e\n\u003cli\u003eBuilt-in-Test (BIT) – Automatic and manual internal self-test of window cleanliness and the overall operation of the detector\u003c\/li\u003e\n\u003cli\u003eWindow heater to avoid condensation and icing\u003c\/li\u003e\n\u003cli\u003eTilt mounting bracket can be connected either above or below the detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV and IR warning levels\u003c\/strong\u003e – 0-20mA – Current output warning when elevated UV or IR radiation is detected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the FIK-UV-IR-AS11 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57540351263093,"sku":"FIK-UV-IR-AS11","price":3533.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/FIK-UV-IR-AS11.jpg?v=1788299499"},{"product_id":"fike-multipoint-asd-detector-205-0003","title":"Fike 205-0003 multipoint ASD detector, White","description":"\u003cp\u003e\u003cstrong\u003eFike 205-0003 is a multipoint ASD detector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Multipoint ASD detectors have set new standards in detector technology. The Addressable ASD detector is used on the Duonet and Quadnet systems. The detectors can be matched to the environment in which they are installed and changed at any time during the lifetime of the installation.\u003c\/p\u003e\n\u003cp\u003eThe mode of detection required can be changed simply by configuring the DIL switch in the detector electronics module (configurable via commissioning software on addressable systems). All modes comply with European detector type specifications. The Addressable ASD detector offers multiple choices for detection, set to a single mode or a combination, for a choice of up to 15 different settings.\u003c\/p\u003e\n\u003cp\u003eProgrammable via a PC or at the panel (Quadnet and Duonet only) and also has a built-in loop isolator as well as I\/O for local control and switching. The Multipoint ASD detectors have the unique benefit of an optional full specification integral sounder, where 90dBA output can be achieved. The Addressable ASD detector has 7 different sound patterns and 3 volume settings.\u003c\/p\u003e\n\u003cp\u003eAll Multipoint ASD detectors have the option of an integral combined strobe.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-mode detection\u003c\/li\u003e\n\u003cli\u003eSelf-calibrating\u003c\/li\u003e\n\u003cli\u003eShort circuit isolator\u003c\/li\u003e\n\u003cli\u003eAuxiliary input facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 205-0003 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57542634799477,"sku":"205-0003","price":41.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/205-0003.jpg?v=1788359718"},{"product_id":"fike-removal-key-ring-23-0244-510","title":"Fike 23-0244-510 removal key ring","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 23-0244-510 is a removal key ring.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fike 23-0244-510 is a Head Removal Key Ring for Fike ASD Multipoint Detectors supplied with retractable pull rope.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHead removal tool for the Twinflex ASD and Sita ASD addressable detectors.\u003c\/li\u003e\n\u003cli\u003eCompact design on retractable key chain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 23-0244-510 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57542637748597,"sku":"23-0244-510","price":7.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/23-0244-510.jpg?v=1788359836"},{"product_id":"fike-low-profile-sounder-326-0001","title":"Fike 326-0001 low profile sounder, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 326-0001 is a low profile sounder from the Sita range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSounder with 88dB output, three sound patterns and inbuilt short circuit isolator. Supplied complete with red mounting base.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAddressable feature for enhanced fire safety communication\u003c\/li\u003e\n\u003cli\u003eLow-profile design for discreet installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 326-0001 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57542734840181,"sku":"326-0001","price":98.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/326-0001.jpg?v=1788361840"},{"product_id":"fike-alarm-control-panel-twinflex-4-zone-panel-black","title":"Fike TWINFLEX 4 ZONE PANEL BLACK alarm control panel","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike TWINFLEX 4 ZONE PANEL BLACK is an alarm control panel from the Pro2 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TWINFLEXpro two wire fire alarm system incorporating the Multipoint ASD combined smoke and heat detector with optional built-in sounder and strobe, allows the whole system to be easily installed using only one pair of wires per zone. Using the Multipoint ASD detector as part of the TWINFLEXpro two wire fire alarm system means that when a detector is wired to the system, a sounder and strobe can also be connected without extra installation time or cost. This greatly reduces the number of points that need to be installed and the time it takes to install.\u003c\/p\u003e\n\u003cp\u003eAs Multipoint ASD offers 7 different modes of detection, the installation is made even simpler since one device suits all applications. Whatever type of detection is required, it can be selected by the flick of a switch at the time of commissioning - 3 different smoke modes, 2 fixed temperature heat modes, a rate of rise mode and a combination smoke or heat mode. As the Multipoint ASD detector is available with or without a full specification integral 90 dBA sounder no extra devices need to be purchased when audible warning is required.\u003c\/p\u003e\n\u003cp\u003eIf extra sound is required or for areas that do not require detection, then a choice of several different standalone sounders, call points or sounder beacons can be used on the same two wires. This versatile system has the ability to differentiate between call point or detector alarm; can accommodate a maximum of 32 devices per zone; has separate fault monitoring display for each zone; and a man walk test facility and zones that can be configured without the need to use resistors or capacitors. To make the TWINFLEXpro system even more flexible, Fike can also provide a special Output Unit.\u003c\/p\u003e\n\u003cp\u003eThis can be situated anywhere on the zone circuit, and is ideal for connecting to plant shutdown, door release mechanisms etc. Repeater panels, which are small remote display units, can be connected to a 4 or 8 zone version 2 TWINFLEX®pro panel via an RS485 data link. A maximum of 8 Repeater Panels can be connected to a single control panel.\u003c\/p\u003e\n\u003cp\u003eRepeater Panels do not connect to or control any devices; they simply report all fire and fault events that occur in the system. They can also perform system actions over the data link (i.e. Silence Alarms, Reset, Sound Alarms and Silence Buzzer).\u003c\/p\u003e\n\u003cp\u003eRepeater Panels are intended to provide display capability at secondary building entrances, nurse's stations and at any location where the panel event information is required to be displayed. Checkpoint Alarm Confirmation Technology\u003c\/p\u003e\n\u003cp\u003eWith the increasing number of new builds, property conversions to flats and bed-sits, and greater pressure on environmental officers to actively enforce the requirements of BS5839 part 6 (the code of practice for fire detection and alarm systems in dwellings), organisations are continually looking for a dependable early warning fire alarm system. The ability to deliver reliable fire detection for these demanding applications, Fike has incorporated Checkpoint Technology into its TWINFLEXpro control panels. What is Checkpoint Technology?\u003c\/p\u003e\n\u003cp\u003eAt the planning stage of installation, fire zones are designated as 'dwelling' for individual rooms or apartments or 'communal' for common areas such as corridors or stairwells. The TWINFLEXpro system has the ability to set a pre-alarm for dwellings, allowing time to investigate the cause of the activation before evacuating the building. This can be programmed between 1 to 5 minutes.\u003c\/p\u003e\n\u003cp\u003eActivation in a communal area will initiate a full alarm immediately. When a fire is detected in a dwelling, only the local (room) sounder will operate during the alarm verification period, to warn the occupants within that particular dwelling.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwinflexPro² 4 zone panels\u003c\/li\u003e\n\u003cli\u003eBlack Panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the TWINFLEX 4 ZONE PANEL BLACK part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57542753288565,"sku":"TWINFLEX 4 ZONE PANEL BLACK","price":380.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/TWINFLEX-4-ZONE-PANEL-BLACK.jpg?v=1788363135"},{"product_id":"fike-loop-card-540-0003","title":"Fike 540-0003 loop card","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 540-0003 is a loop card.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CIE Loop Card allows a CIE-A-400 1 Loop Panel to be converted to a 2 Loop Panel giving an extra 200 device capability\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eCompatible with Fike CIE-A-400 Panel\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 540-0003 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57542756925813,"sku":"540-0003","price":217.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/540-0003.jpg?v=1788363347"},{"product_id":"fike-flash-point-302-0012","title":"Fike 302-0012 flash point, White","description":"\u003cp\u003e\u003cstrong\u003eFike 302-0012 is a flash point.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TWINFLEX 2-Wire Flashpoint Sounder\/Strobe is a low profile sounder \/strobe that has the option f being fitted with a domed lens if required (302 0022). The device is fitted with an integral sounder capable of providing one of 3 different tones and operating at 65 or 90dB dependant on programming. A synchronized LED strobe output is also included to provided a visual indication of an alarm activation.\u003c\/p\u003e\n\u003cp\u003eThis sounder\/strobe is compatible with Fike's TWINFLEX range of control panels and may be installed on the same zone as the Multipoint detector\/sounder and associated TWINFLEX devices. Its operating parameters are configured using a bank of DIL switches on the rear of the device.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for areas that do not require automatic detection but require a high sound level\u003c\/li\u003e\n\u003cli\u003e90dB\u003c\/li\u003e\n\u003cli\u003e18-35Vdc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 302-0012 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57545973301621,"sku":"302-0012","price":48.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/302-0012.jpg?v=1788455541"},{"product_id":"fike-horn-strobe-302-0023","title":"Fike 302-0023 horn\/strobe, Red","description":"\u003cp\u003e\u003cstrong\u003eFike 302-0023 is a horn\/strobe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Twinflex Weatherproof Flashpoint device provides visual indication when the system enters an alarm condition. This device is compatible with the Twinflex 2-wire range of Fire Alarm equipment and comprises a 2-wire zone-powered visual indication beacon. This device may be installed on the same zone as the Multipoint detector\/sounder and associated Twinflex devices.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVisual Indicator\u003c\/li\u003e\n\u003cli\u003eWeatherproof\u003c\/li\u003e\n\u003cli\u003eZone-powered device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 302-0023 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57545973367157,"sku":"302-0023","price":66.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/302-0023.jpg?v=1788455562"},{"product_id":"fike-fire-alarm-control-panel-313-0002","title":"Fike 313-0002 fire alarm control panel, White","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 313-0002 is a fire alarm control panel from the Sita range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSounder with 90dB output, seven sound patterns and inbuilt short circuit isolator. Supplied complete with back box and flush adaptor plate.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e90dB output for clear audible alerts\u003c\/li\u003e\n\u003cli\u003eSeven selectable sound patterns\u003c\/li\u003e\n\u003cli\u003eAddressable unit for precise communication\u003c\/li\u003e\n\u003cli\u003eDigital technology for high-speed data transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 313-0002 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57548586615157,"sku":"313-0002","price":58.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/313-0002.jpg?v=1788531697"},{"product_id":"fike-conventional-expansion-card-505-0007","title":"Fike 505-0007 conventional expansion card","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 505-0007 is a conventional expansion card.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiscover the Fike 505-0007 TwinflexPro2 Conventional Expansion Card, a versatile addition to your fire safety system. This expansion card supports both hybrid bi-wire and 4-wire devices, allowing for flexible installations. Specifically designed for use with the Fike Twinflex Pro² 4 zone panel, it enhances your system's capabilities by adding up to four conventional zones.\u003c\/p\u003e\n\u003cp\u003eIdeal for expanding your fire detection and alarm system, this card ensures a seamless integration and reliable performance.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFike 505-0007\u003c\/li\u003e\n\u003cli\u003e4 Conventional zone expansion card\u003c\/li\u003e\n\u003cli\u003eAllows hybrid bi-wire and 4 wire devices on one system\u003c\/li\u003e\n\u003cli\u003eCompatible with the Fike Twinflex Pro² 4 zone panel only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 505-0007 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57548741017973,"sku":"505-0007","price":188.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/505-0007.jpg?v=1788533432"},{"product_id":"fike-output-boxed-module-803-0005","title":"Fike 803-0005 output boxed module","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 803-0005 is an output boxed module.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Multipoint I\/O module provides an interface between ancillary devices and the loop via a detector. It can be configured as an input allowing for reporting from other systems \/ devices or as an output to control external systems. Digital communication technology to the control panel is implemented, allowing for accurate data transfer at high transmission speeds.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRequires 24vdc EN54 power supply\u003c\/li\u003e\n\u003cli\u003eMonitored outputs\u003c\/li\u003e\n\u003cli\u003eEOL devices included\u003c\/li\u003e\n\u003cli\u003eMonitored input facility\u003c\/li\u003e\n\u003cli\u003eThe module connects to the addressable loop\u003c\/li\u003e\n\u003cli\u003eDPCO relay\u003c\/li\u003e\n\u003cli\u003e240VAC 3A rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 803-0005 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57548782502261,"sku":"803-0005","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/803-0005.jpg?v=1788534639"},{"product_id":"fike-sounder-323-0001","title":"Fike 323-0001 sounder, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 323-0001 is a sounder from the Sita range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSounder with 87dB output, seven sound patterns and inbuilt short circuit isolator. Supplied complete with back. Suitable for indoor (IP21) and outdoor (IP55) applications.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e87dB Sound Output\u003c\/li\u003e\n\u003cli\u003e7 Distinct Sound Patterns\u003c\/li\u003e\n\u003cli\u003eBuilt-in Isolator for Enhanced Safety\u003c\/li\u003e\n\u003cli\u003eIP21 and IP55 Ratings for Indoor\/Outdoor Use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 323-0001 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57551344009589,"sku":"323-0001","price":75.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/323-0001.jpg?v=1788701633"},{"product_id":"fike-strobe-326-0015-r","title":"Fike 326-0015-R strobe, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 326-0015-R is a strobe from the Sita range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLED visual indication beacon (strobe) with inbuilt short circuit isolator. Supplied complete with red mounting base and red lens.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeatherproof design for outdoor use\u003c\/li\u003e\n\u003cli\u003eIn stock and ready for quick delivery\u003c\/li\u003e\n\u003cli\u003eIdeal for various electrical applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 326-0015-R part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57551344173429,"sku":"326-0015-R","price":124.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/326-0015-R.jpg?v=1788701649"},{"product_id":"fike-battery-conversion-kit-505-0020","title":"Fike 505-0020 battery conversion kit","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 505-0020 is a battery conversion kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiscover the Fike 505-0020 TwinflexPro2 Battery Conversion Kit, a perfect enhancement for your Fike Twinflex Pro range of panels. This kit not only allows for the integration of up to two 7 Ah backup batteries but also boosts the system's usability and reliability. Each kit includes conduit bushes, a coupling, and a battery lead harness, ensuring a seamless setup.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolts onto Fike Twinflex Pro range of panels\u003c\/li\u003e\n\u003cli\u003eAllows for upto 2 x 7 Ah back up batteries\u003c\/li\u003e\n\u003cli\u003eEnhance the usability and reliability of the systems\u003c\/li\u003e\n\u003cli\u003eConduit bushes, coupling and battery lead harness are provided with the external battery box kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 505-0020 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57551473312117,"sku":"505-0020","price":205.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/505-0020.jpg?v=1788703184"},{"product_id":"fike-conventional-zone-module-803-0010","title":"Fike 803-0010 conventional zone module","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 803-0010 is a conventional zone module.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAddressable conventional zone module mounted within a standard double gang box. Provides the facility to connect 1 zone of conventional resistance monitored devices to the addressable system, up to a maximum of 20mA. EOL capacitors included.\u003c\/p\u003e\n\u003cp\u003eConnects to the addressable loop.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows connection of conventional detectors to Fike addressable systems\u003c\/li\u003e\n\u003cli\u003eConnects directly to the addressable loop for seamless integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 803-0010 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57551542649205,"sku":"803-0010","price":93.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/803-0010.jpg?v=1788704158"},{"product_id":"fike-conventional-sounder-nsf100r-w-d","title":"Fike NSF100R-W-D conventional sounder, Red","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike NSF100R-W-D is a conventional sounder.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fike NSF100R-W-D is a sounder\/strobe device with EN54 approval. It provides a highly efficient, low-power solution for alarm signalling when both audible and visual alerts are required. This unit combines sounder and strobe functions into a single device, with a unique first-fix installation method in the base for quick and cost-effective fitting.\u003c\/p\u003e\n\u003cp\u003eDesigned for high quality and durability, the Fike NSF100 ensures reliable operation throughout its lifespan, even in demanding environments. With a wide selection of tones and flash options available, this versatile product suits a broad range of applications.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuick First fix installation\u003c\/li\u003e\n\u003cli\u003eWide operating voltage\u003c\/li\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eAttractive design\u003c\/li\u003e\n\u003cli\u003eFull independent monitoring of pre-alarm and alarm channels (Dual flash versions)\u003c\/li\u003e\n\u003cli\u003e32 alarm tones\u003c\/li\u003e\n\u003cli\u003e2 stage alarm option\u003c\/li\u003e\n\u003cli\u003eFully synchronised\u003c\/li\u003e\n\u003cli\u003eApproved to EN54-3 and EN54-23\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the NSF100R-W-D part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57552619078005,"sku":"NSF100R-W-D","price":119.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/NSF100R-W-D.jpg?v=1788713118"},{"product_id":"fike-key-09-0026","title":"Fike 09-0026 key","description":"\u003cp\u003e\u003cstrong\u003eFike 09-0026 is a key.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpare key for twinflex pro panel\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpare key\u003c\/li\u003e\n\u003cli\u003eUse with Twinflex Pro, Duonet and Quadnet panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 09-0026 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57557636153717,"sku":"09-0026","price":3.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/09-0026.jpg?v=1788869526"},{"product_id":"fike-head-removal-tool-25-0015-301","title":"Fike 25-0015-301 head removal tool, Black","description":"\u003cp\u003e\u003cstrong\u003eFike 25-0015-301 is a head removal tool.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTool to remove the optical chamber of Multipoint detectors, the lens of Flash Point beacons, and the main body of the Hatari range.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnlocks optical chamber on Rafiki\/Fike Multipoint detector\/sounder\u003c\/li\u003e\n\u003cli\u003eUnlocks Hatari and Flashpoint sounder beacons\u003c\/li\u003e\n\u003cli\u003eCan be attached to extendable pole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 25-0015-301 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57557865759093,"sku":"25-0015-301","price":14.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/25-0015-301.jpg?v=1788875946"},{"product_id":"fike-head-removal-tool-25-0046-201","title":"Fike 25-0046-201 head removal tool, Black","description":"\u003cp\u003e\u003cstrong\u003eFike 25-0046-201 is a head removal tool.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo remove the optical chamber of Multipoint ASD detectors. This tool fits directly onto the Solo poles range of detector test equipment.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for removing the optical chamber of multi-point ASD detectors\u003c\/li\u003e\n\u003cli\u003eCan be mounted onto a pole for high level access\u003c\/li\u003e\n\u003cli\u003eFits directly onto the Solo poles range of detector test equipment\u003c\/li\u003e\n\u003cli\u003eMakes maintenance of system simple\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 25-0046-201 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57557866381685,"sku":"25-0046-201","price":14.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/25-0046-201.jpg?v=1788875957"},{"product_id":"fike-point-protective-cover-25-0083-303","title":"Fike 25-0083-303 point protective cover, Plastic","description":"\u003cp\u003e\u003cstrong\u003eFike 25-0083-303 is a point protective cover.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 25-0083-303 is a cover flap that can be fitted to Fike's manual call point range in order to reduce the risk of accidental operation\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCall point cover\u003c\/li\u003e\n\u003cli\u003eProtects against accidental damage or activation\u003c\/li\u003e\n\u003cli\u003eFits directly on to Twinflex Callpoint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 25-0083-303 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57557867364725,"sku":"25-0083-303","price":7.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/25-0083-303.jpg?v=1788875971"},{"product_id":"fike-weatherproof-call-point-402-0007-nc","title":"Fike 402-0007-NC weatherproof call point","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 402-0007-NC is a weatherproof call point.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fike 402-0007-NC Twinflex Weatherproof Manual Call Point (MCP) is IP65 rated and allows user activation of the fire alarm system. Once operated, the device latches in the alarm position and requires manual resetting with a special key. This device is compatible with the Twinflex Fire Alarm Control Panels range and is a 2-wire zone-powered Manual Call Point (MCP).\u003c\/p\u003e\n\u003cp\u003eIt may be installed on the same zone as the Twinflex Multipoint detector\/sounder and other related Twinflex devices.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRe-settable Weather Proof Callpoint\u003c\/li\u003e\n\u003cli\u003eLED indication for end of line\u003c\/li\u003e\n\u003cli\u003eIncludes reset key\u003c\/li\u003e\n\u003cli\u003eIP65 Rated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 402-0007-NC part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57558194684277,"sku":"402-0007-NC","price":45.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/402-0007-NC.jpg?v=1788877460"},{"product_id":"fike-twinflexpro-software-505-0040","title":"Fike 505-0040 twinflexpro software","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 505-0040 is a twinflexpro software.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiscover the efficiency of Fike's TwinflexPro Software, model 505-0040, designed to seamlessly integrate with all Fike Twinflex Pro panels. This software ensures a streamlined and user-friendly experience, enhancing your fire safety systems. Please note, a USB A to B lead is required for operation, which is not included.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwinflex Pro OSP software\u003c\/li\u003e\n\u003cli\u003eCompatible with all Fike Twinflex Pro panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires USB A to B lead\u003c\/strong\u003e (not supplied)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 505-0040 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57558604611957,"sku":"505-0040","price":65.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/505-0040.jpg?v=1788879646"},{"product_id":"fike-fire-alarm-control-panel-accessory-507-0060","title":"Fike 507\/0060 fire alarm control panel accessory, Green","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 507\/0060 is a fire alarm control panel accessory.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiscover the Fike 507-0060 Quadnet and Duonet Software Disk, a top-tier solution for your safety and communication needs. This product features an advanced intumescent formulation that is highly flexible, water-resistant, and causes no adverse effects to plastic or metallic components. It boasts a joint movement capability of +\/- 20%, is halogen-free, and resists fungi and vermin.\u003c\/p\u003e\n\u003cp\u003eAdditionally, it contributes to green building initiatives and meets rigorous standards with a fire classification to EN 13501-2 and acoustic isolation up to 63dB. Ideal for ensuring robust fire safety and sound insulation, this product is a must-have for any safety-conscious setup. Enhance your safety measures today with Fike's reliable and efficient software disk!\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntumescent Mastic with Acoustic Rating\u003c\/li\u003e\n\u003cli\u003eAdvanced intumescent formulation\u003c\/li\u003e\n\u003cli\u003eHighly flexible and water resistant\u003c\/li\u003e\n\u003cli\u003eCauses no known adverse effects to plastic pipes, plastic cables, sheathing or metallic components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoint movement capability of +\/\u003c\/strong\u003e- 20%\u003c\/li\u003e\n\u003cli\u003eHalogen free, resists fungi and vermin\u003c\/li\u003e\n\u003cli\u003eContributes to Green Building\u003c\/li\u003e\n\u003cli\u003eFire Classification to EN 13501-2\u003c\/li\u003e\n\u003cli\u003eAcoustic Isolation to EN 10140 to 63dB\u003c\/li\u003e\n\u003cli\u003eAir Permeability testing to EN 1026 to 600Pa - 100Pa 0.0\/0.0 m3\/h\/m2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 507\/0060 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57558605693301,"sku":"507\/0060","price":314.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/507-0060.jpg?v=1788879657"},{"product_id":"fike-fire-alarm-control-540-0001","title":"Fike 540-0001 fire alarm control","description":"\u003cp\u003e\u003cstrong\u003eFike 540-0001 is a fire alarm control.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CIE-A-400 Addressable Fire Alarm Control Panel is a two-loop panel, with each loop supporting up to 200 devices and a maximum loop length of 2km. The panel also offers two configurable Monitored Input Circuits, two configurable Monitored Output Circuits, two configurable Relays, one Fault Relay, and a Peripheral Bus Circuit to add up to eight Repeater Panels. The system can be configured using three alarm stages with full ‘Zone to Zone’ Cause and Effect across all 32 panel zones, including provisions for Alarm Confirmation and Delay Timers.\u003c\/p\u003e\n\u003cp\u003eAn additional 32 output zones are provided for more complex Cause and Effect programming.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 loop addressable fire alarm panel\u003c\/li\u003e\n\u003cli\u003eCompatible with Fike's ASD addressable range of devices\u003c\/li\u003e\n\u003cli\u003eFaster and easier installation\u003c\/li\u003e\n\u003cli\u003eImproved and easier to use OSP software\u003c\/li\u003e\n\u003cli\u003eSimple, yet intuitive end user interface\u003c\/li\u003e\n\u003cli\u003eEnhanced service and fault finding tools\u003c\/li\u003e\n\u003cli\u003eUtilises soft addressing to eliminate physical address changes at each device\u003c\/li\u003e\n\u003cli\u003eFaster, more reliable communication between panel and devices\u003c\/li\u003e\n\u003cli\u003eFire and fault event log\u003c\/li\u003e\n\u003cli\u003eLCD graphical user display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 540-0001 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57558635446645,"sku":"540-0001","price":631.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/540-0001.jpg?v=1788880184"},{"product_id":"fike-lead-803-0021","title":"Fike 803-0021 lead","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike 803-0021 is a lead.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe figures we hold for this lead cover product type.\u003c\/p\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 803-0021 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57558811312501,"sku":"803-0021","price":272.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/803-0021.jpg?v=1788882627"},{"product_id":"fike-detector-mounting-base-905-0001","title":"Fike 905-0001 detector mounting base, White","description":"\u003cp\u003e\u003cstrong\u003eFike 905-0001 is a detector mounting base.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe mounting bases are for use with the Sita Multipoint ASD detector. Complete with spring-loaded short link to give positive core continuity when detector’s removed.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSold in packs of 5\u003c\/li\u003e\n\u003cli\u003eSpring loaded shorting pin to allow for circuit continuity on head removal\u003c\/li\u003e\n\u003cli\u003eSuitable for ASD detectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 905-0001 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57559081058677,"sku":"905-0001","price":23.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/905-0001.jpg?v=1788884481"},{"product_id":"fike-tilt-mount-fik-tmo-s01","title":"Fike FIK-TMO-S01 tilt mount, Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFike FIK-TMO-S01 is a tilt mount.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA flame detector mount designed for small detectors (non-HD)\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Stainless steel\u003c\/li\u003e\n\u003cli\u003eA flame detector mount designed for small detectors (non-HD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the FIK-TMO-S01 part number rather than the description.\u003c\/p\u003e","brand":"Fike","offers":[{"title":"Default Title","offer_id":57559369843061,"sku":"FIK-TMO-S01","price":272.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/FIK-TMO-S01.jpg?v=1788891546"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/collections\/fike_logo.png?v=1746009337","url":"https:\/\/wmestore.co.uk\/collections\/fike-products.oembed?page=3","provider":"WME","version":"1.0","type":"link"}