{"title":"PoE Extenders","description":"\u003cp\u003eAn Ethernet extender carries a network link beyond the 100m reach of a normal copper cable run, and a PoE extender passes power along with the data, so an IP camera, wireless access point or IP phone can sit well away from the switch. This collection covers in-line PoE repeaters such as the TRENDnet TI-E100, point-to-point kits over Cat5e or a single twisted pair, and Ethernet-over-coax adapters that re-use the coax left by analogue CCTV.\u003c\/p\u003e","products":[{"product_id":"highwire-powerstar-quad-poe-over-coax-adapter-4-port-poe-10-100-vhw-hwps-c4","title":"HIGHWIRE Powerstar Quad PoE-over-Coax Adapter, 4-Port PoE+ 10\/100, VHW-HWPS-C4","description":"\u003cp\u003e\u003cstrong\u003eVeracity HIGHWIRE Powerstar Quad (VHW-HWPS-C4)\u003c\/strong\u003e is a camera-end Ethernet-over-coax adapter with an integrated 4-port unmanaged PoE switch. It delivers 100Base-TX Ethernet and PoE to up to four IP cameras over existing RG59\/RG6\/RG11 coax cable. The unit accepts PoE over coax from a HIGHWIRE Powerstar Base or can be powered locally with a 57 V DC supply for increased PoE budget. SafeView LEDs provide instant confirmation of coax link and PoE levels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRe-uses existing coax (RG59\/RG6\/RG11) to deliver Ethernet + PoE to up to four devices.\u003c\/li\u003e\n  \u003cli\u003eIntegrated unmanaged 4× 10\/100 RJ45 switch with PoE+ (802.3af\/at) support; auto-MDI\/X.\u003c\/li\u003e\n  \u003cli\u003ePoE over coax or local 57 V DC input for higher power budgets; up to 25 W per port (PoE+).\u003c\/li\u003e\n  \u003cli\u003eLong reach: up to 300 m on RG59, 350 m on RG6, 500 m on RG11 (100Base-TX).\u003c\/li\u003e\n  \u003cli\u003eSafeView status LEDs for link, coax power and PoE budget indication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases:\u003c\/strong\u003e retrofit IP camera sites to reuse existing coax, extend Ethernet and supply PoE at camera end without re-cabling. Suitable for both contractor and DIY installers; observe manufacturer installation guidance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; safety:\u003c\/strong\u003e CE, FCC and RoHS declared. Install in accordance with local electrical regulations; disconnect power before installation and use a qualified installer where required.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"-","offer_id":56594914574709,"sku":"VHW-HWPS-C4","price":397.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM001392_1.png?v=1768252309"},{"product_id":"veracity-highwire-powerstar-duo-2-port-poe-over-coax-camera-adaptor-vhw-hwps-c2","title":"Veracity HIGHWIRE Powerstar Duo 2-Port PoE-over-Coax Camera Adaptor VHW-HWPS-C2","description":"\u003cp\u003e\u003cstrong\u003eVeracity HIGHWIRE Powerstar Duo (VHW-HWPS-C2)\u003c\/strong\u003e is a compact 2‑port camera adaptor that re‑uses existing coaxial cabling to deliver full 100Base‑TX Ethernet and PoE to two IP cameras. Pair it with a HIGHWIRE Powerstar Base at the head end to provide reliable Ethernet‑over‑coax transmission and an integrated 2‑port PoE switch at the camera end.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRe‑uses RG59\/RG6\/RG11 coax — avoids costly re‑cabling and speeds installation.\u003c\/li\u003e\n  \u003cli\u003eProvides full 100Base‑TX performance with up to 200 Mbps total bandwidth (up+down).\u003c\/li\u003e\n  \u003cli\u003eIntegrated 2‑port unmanaged PoE switch (IEEE 802.3af \/ 802.3at), up to 25 W per port depending on power source.\u003c\/li\u003e\n  \u003cli\u003ePoE‑over‑coax or local 57 V DC input (detachable screw terminal) for higher power budgets.\u003c\/li\u003e\n  \u003cli\u003eSafeView™ power and diagnostic display for instant on‑site verification of link and power status.\u003c\/li\u003e\n  \u003cli\u003eAutomatic operation — no IP configuration or manual pairing required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases:\u003c\/strong\u003e ideal for CCTV camera installations where existing coax is present, including upgrades from analogue CCTV to IP, temporary deployments, or locations where new cable runs are impractical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; safety:\u003c\/strong\u003e conforms to CE, UKCA, FCC, RoHS and UL markings where applicable. For safety and warranty compliance, installation should be carried out by a qualified electrician or network installer. Refer to the official Veracity datasheet for full PoE budget details and recommended wiring practices.\u003c\/p\u003e\n\u003cp\u003eOfficial datasheet: HIGHWIRE Powerstar Duo (VHW-HWPS-C2).\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"-","offer_id":56595090637173,"sku":"VHW-HWPS-C2","price":358.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM001391_1.png?v=1768256611"},{"product_id":"highwire-powerstar-camera-unit-poe-poe-over-coax-100base-tx-200-mbps-vhw-hwps-c","title":"HIGHWIRE Powerstar Camera Unit, PoE\/PoE+ over Coax, 100Base-TX, 200 Mbps, VHW-HWPS-C","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003cbr\u003eThe Veracity HIGHWIRE Powerstar Camera Unit (VHW-HWPS-C) is a compact camera‑side Ethernet‑over‑coax (EoC) media converter that delivers 100Base‑TX data and PoE\/PoE+ power to an IP camera over existing 75 Ω coax cable. Designed for fast, plug‑and‑play upgrades of legacy coax CCTV systems, it auto‑negotiates PoE\/PoE+ and reports available power via SAFEVIEW™.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDelivers data + power over existing coax\u003c\/strong\u003e — supports IEEE 802.3af\/802.3at (PoE\/PoE+).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100Base‑TX performance\u003c\/strong\u003e with up to 200 Mbps aggregate (up+down) over coax.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong range\u003c\/strong\u003e — up to 300 m on RG59 or 500 m on RG11 at full rate (varies with camera wattage and cable quality).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSAFEVIEW™ display\u003c\/strong\u003e for instant confirmation of link and available power at the base unit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstaller friendly\u003c\/strong\u003e — BNC coax input, RJ45 camera output, status LEDs and automatic PoE detection\/protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse cases\u003c\/strong\u003e\u003cbr\u003eIdeal for installers and system integrators migrating analogue CCTV installations to IP without re‑cabling. Suitable for single camera upgrades or phased migration strategies in commercial, retail and public‑sector sites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance \u0026amp; safety\u003c\/strong\u003e\u003cbr\u003eComplies with CE, UKCA, RoHS and FCC listings. Follow local electrical regulations when supplying auxiliary DC power or installing the base unit. For full technical details and installation guidance, consult the manufacturer datasheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires a HIGHWIRE Powerstar base unit to provide PoE over coax from the head end.\u003c\/li\u003e\n  \u003cli\u003eIf external PSU is used, ensure supply meets 40–57 V DC, 0.7 A max and is Class‑2 isolated as per datasheet.\u003c\/li\u003e\n  \u003cli\u003eObserve operating temperature limits when delivering higher PoE power; allow ventilation if mounted in enclosed spaces.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"-","offer_id":56595135529333,"sku":"VHW-HWPS-C","price":225.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ITM001390_1.png?v=1768259414"},{"product_id":"nitek-poe-extender-el1500c","title":"Nitek EL1500C PoE extender, Aluminum","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek EL1500C is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Etherstretch Model EL1500C IP Devices over Coax Network Extender-PoE Inserter System is another IP Video Transmission Solution from Nitek. The System transmits IP devices over Coax and can quickly turn any ordinary RG59U coaxial cable into a high-speed network communication and PoE path. When operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500m (1640').The EL1500C Coax Ethernet Extender System consists of a Transmitter and a Receiver set, which requires very little installation time and absolutely no set up or configuration.\u003c\/p\u003e\n\u003cp\u003eThe EL1500C Ethernet over Coax Network Extender Transmitter and Receiver are transparent to the network and have no IP or MAC addressing. Simply connect network devices to the network ports of the Transmitter and Receiver along with existing cabling and the system begins communicating. LED Indicators show the status of network communication and PoE power.\u003c\/p\u003e\n\u003cp\u003eWhen connected to a PoE switch, power from the switch is used as the power source for the connected EL1500C Receiver. In applications where network switches are not PoE capable, an optional power source (PS48 sold separately) can be used to insert power to the EL1500C Receiver. The power is sent from the Receiver over the coax to the Transmitter.\u003c\/p\u003e\n\u003cp\u003eThe Transmitter uses PoE as its power source and powers the connected PoE network device as well. The EL1500C Coax Network Extender System extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIP Network Extender transmits over coax up to 500m (1640')\u003c\/li\u003e\n\u003cli\u003eIncludes Transmitter and Receiver units\u003c\/li\u003e\n\u003cli\u003eExtends PoE to Transmitter and IP cameras or Network devices\u003c\/li\u003e\n\u003cli\u003eTransparent to the network\u003c\/li\u003e\n\u003cli\u003eNo setup required\u003c\/li\u003e\n\u003cli\u003eEnvironmentally Hardened to meet NEMA TS-2 specifications\u003c\/li\u003e\n\u003cli\u003ePatent Pending USA and Europe Euro Pat App 2779641\u003c\/li\u003e\n\u003cli\u003eLED indicators for network signals, link status and power\u003c\/li\u003e\n\u003cli\u003eOptional power supply can insert PoE power for non-PoE switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the EL1500C part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57526741762421,"sku":"EL1500C","price":490.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/EL1500C.jpg?v=1787822310"},{"product_id":"comnet-network-extender-clfe4eoc","title":"Comnet CLFE4EOC network extender, Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLFE4EOC is a network extender from the CLFE range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine® Ethernet over copper line supports up to sixteen channels of 10\/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power.\u003c\/p\u003e\n\u003cp\u003eThese units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization.\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 3,000 feet\u003c\/strong\u003e (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 5,000 feet\u003c\/strong\u003e (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial cable\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLFE4EOC part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57529650774389,"sku":"CLFE4EOC","price":837.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLFE4EOC.jpg?v=1787870896"},{"product_id":"comnet-network-extender-cllfe1poeu","title":"Comnet CLLFE1POEU network extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLLFE1POEU is a network extender from the CL(L,R)FE(X)POE(C,U) range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine® Ethernet over copper CL(L,R)FE(X)POE(C,U) Series supports up to sixteen channels of 10\/100Mbps Ethernet with PoE+ Power Injection and Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With the ability to connect directly to a PoE+ switch, or the ability to generate PoE+ power with a 48 to 56 V input* to either the Local or Remote ends, these units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. A complete set includes both a Local and Remote module.\u003c\/p\u003e\n\u003cp\u003eRemote units are available in small package sizes that include one or four channels, and Local modules are available in the same packages as well as a 1RU rack for larger channel counts.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eType tested to RFC-2544 TCP\/IP network bandwidth packet transmission standards\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization.\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003eStatus indicating LEDs provide rapid indication of critical operating parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 3,000 feet\u003c\/strong\u003e (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 5,000 feet\u003c\/strong\u003e (1,524 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over Coaxial cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLLFE1POEU part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57531691794805,"sku":"CLLFE1POEU","price":407.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLLFE1POEU.jpg?v=1787934360"},{"product_id":"veracity-network-extender-vls-1p-bc","title":"Veracity VLS-1P-BC network extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity VLS-1P-BC is a network extender from the LONGSTAR range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHIGHWIRE Longstar delivers unsurpassed distances HIGHWIRE Longstar delivers a full bandwidth 100Base-T network signal and POE Plus over unsurpassed lengths of regular coaxial cable. It provides the reassurance of exceptional performance and reliability, while enabling considerable savings in the cost, time and risk of upgrading legacy analogue camera installations to IP.A range of 540 - 690 metres with RG-59 or even up to 1400 metres with RG-11 is supported, without compromising the 100Base-T data rate. For even greater distances it can automatically configure to 10Base-T operation, running approx. three times further with data onlyModels with optional POE in or out can deliver the full 25 watts of 802.3at POE Plus to cameras over the same legacy cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for straight-forward installation, all the HIGHWIRE Longstar models are entirely self-configuring, and feature extended temperature operation, have a rugged enclosure with both wall-mount or high density rack mounting optionsDesigned for InstallersUsed in pairs, installation of HIGHWIRE Longstar is extremely fast and efficient. The devices self-configure and self optimise on connection. No set-up or system pairings are required.\u003c\/p\u003e\n\u003cp\u003eData and power connections are easily monitored during installation using the embedded LEDs. The system incorporates Veracity's SafeView™ technology, which provides instant confirmation of link status, power level and diagnostic information.Flexible High Performance Although designed for 75 Ohm cable, HIGHWIRE Longstar will operate over 50 Ohm cable with full performance and only a slight reduction in the maximum distance attainable.POE - Simple Reliability POE-equipped models allow all of the power for the link to be sourced from a POE switch, POE injector or power supply, for simple installation and optional UPS backed power delivery for high resilience against grid power failures.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with any IP camera or device\u003c\/li\u003e\n\u003cli\u003ePoE provides up to 25W of power up to 4265'\u003c\/li\u003e\n\u003cli\u003eExtends 100Base-TX Ethernet up to 4593' with RG11 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the VLS-1P-BC part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57531780202869,"sku":"VLS-1P-BC","price":268.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/VLS-1P-BC.jpg?v=1787940657"},{"product_id":"veracity-network-extender-vls-lsm-b","title":"Veracity VLS-LSM-B network extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity VLS-LSM-B is a network extender from the LONGSPAN range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Power and Bandwidth your IP Camera Needs, at Exceptional Distances\u003c\/p\u003e\n\u003cp\u003eLONGSPAN delivers unprecedented power and bandwidth over extreme lengths of regular Cat 5e or Cat 6 network cable, enabling a dependable connection to IP cameras and other remote network devices. LONGSPAN is a point-to-point solution. It self-configures for the best performance.\u003c\/p\u003e\n\u003cp\u003eNo set up or configuration is required. LONGSPAN even supports single-pair UTP cables, providing a fast upgrade solution for legacy analogue systems. LONGSPAN offers unrestricted 100Base-TX at a phenomenal 820 metres range, with POE-equipped models delivering full-power 802.3at POE Plus at 600 metres, LONGSPAN assures reliability in the most challenging scenarios.\u003c\/p\u003e\n\u003cp\u003eLONGSPAN is available in POE and data-only models. It is also available in high power Max single and Quad versions for the base and camera ends. See Documentation Tab for all datasheets including LONGSPAN Base 8, LONGSPAN Max and LONGSPAN Max Quad datasheets.\u003c\/p\u003e\n\u003cp\u003eUnrivalled range, uncompromised bandwidth\u003c\/p\u003e\n\u003cp\u003eIP cameras can demand peak network bandwidth of several times their average data rate while transmitting critical high-activity or low-light scenes. That's why LONGSPAN has been designed to support the full 200Mbps bandwidth required for reliable 100Base-TX Ethernet at up to 820 metres Cat 6 (or 690 metres Cat 5e). For even more extreme distances, LONGSPAN can automatically negotiate a 10Base-T connection, supporting a range in excess of 1000 metres, over ten times the conventional limit for cabled Ethernet.\u003c\/p\u003e\n\u003cp\u003eMore power, much further\u003c\/p\u003e\n\u003cp\u003eLONGSPAN models with POE can be powered from conventional IEEE 802.3af POE or 802.3at POE Plus and 802.3bt High Power POE switches and injectors, or Veracity's versatile power supply options can be specified for maximum range and power. The full 25 watts required for POE Plus devices is available at up to 600 metres Cat 6 when a Veracity power supply is used, or 5 to 20 watts can be delivered from other POE sources depending on range and cable type. LONGSPAN Max High Power devices are also now available up to 90W.\u003c\/p\u003e\n\u003cp\u003eUpgrade to IP, keep the UTP\u003c\/p\u003e\n\u003cp\u003eSites with legacy analogue cameras often use UTP baluns to send video over several hundred metres of twisted pair cable. LONGSPAN facilitates a simple upgrade path to IP for these installations. LONGSPAN can automatically detect and adapt to single-pair cables, and deliver the same uncompromised 10 or 100Base-TX connection up to 820 metres, assuring predictable IP video quality each and every time.\u003c\/p\u003e\n\u003cp\u003eHigh density, high reliability\u003c\/p\u003e\n\u003cp\u003eLONGSPAN's unique, expandable mounting system permits up to 24 channels to be mounted in just 1U of rack space, with configurable rear-mount power supplies available if desired. Smart diagnostic LEDs, including a SAFEVIEW® display on POE models, provide instant confirmation of cable-dependent power availability, and feedback of remote link status and other diagnostic information, for fast, confident installation.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLONGSPAN enhanced with 90W POE capability\u003c\/strong\u003e (802.3bt)\u003c\/li\u003e\n\u003cli\u003eLong range point-to-point Ethernet over Cat5e or Cat6 cable\u003c\/li\u003e\n\u003cli\u003eUnrestricted 100Base-TX with POE at over 820m s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the VLS-LSM-B part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57531780596085,"sku":"VLS-LSM-B","price":305.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/VLS-LSM-B.jpg?v=1787940681"},{"product_id":"comnet-network-extender-clfe1eou","title":"Comnet CLFE1EOU network extender, Rail Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLFE1EOU is a network extender from the CLFE range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine® Ethernet over copper line supports up to sixteen channels of 10\/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power.\u003c\/p\u003e\n\u003cp\u003eThese units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization.\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 3,000 feet\u003c\/strong\u003e (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 5,000 feet\u003c\/strong\u003e (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial cable\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3af standard for Power over Etherne\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLFE1EOU part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57531931754869,"sku":"CLFE1EOU","price":298.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLFE1EOU.jpg?v=1787959992"},{"product_id":"nitek-poe-extender-el4500c","title":"Nitek EL4500C PoE extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek EL4500C is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EL4500C is another component of the Nitek cutting edge Etherstretch™ line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing cable infrastructure (coax). With the addition of an external power supply, the transmitter can supply PoE power to operate 4 IP cameras or other network devices.\u003c\/p\u003e\n\u003cp\u003eThe unit transmits data from the 4 IP network devices over the coax cable for distances up to 500 meters (1,600 feet). The EL4500C is a system containing a transmitter and a receiver unit that requires very little installation time and absolutely no set up or configuration. These units quickly turn ordinary RG59 coax cable into a high speed network communication and PoE pathway.\u003c\/p\u003e\n\u003cp\u003eThe EL4500C is transparent to the network thus requiring no IP and MAC addressing. Simply connect your network devices to the IP Ports of the transmitter, connect the transmitter to the receiver and the system begins communicating. LED indicators show the status of network communication and PoE power.\u003c\/p\u003e\n\u003cp\u003eThe EL4500C requires no network settings to be changed or adjusted. The Nitek EtherStretch EL4500C extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The EL4500C is ideal for retrofitting existing installations.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports 4 network devices, including mega-pixel technology IP cameras\u003c\/li\u003e\n\u003cli\u003eIP Network Extender transmits over coax up to 1,640' (500m)\u003c\/li\u003e\n\u003cli\u003eIncludes 4 Port Transmitter and Receiver units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the EL4500C part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57531942142325,"sku":"EL4500C","price":902.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/EL4500C.jpg?v=1787961041"},{"product_id":"comnet-audio-extender-receiver-fra2c1s1","title":"Comnet FRA2C1S1 audio extender receiver, Freestanding, Rack Mount, Wall Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet FRA2C1S1 is an audio extender receiver from the FTA\/FRA2C1(M,S)1 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet FTA\/FRA2C1 Series audio multiplexer provides the transmission of two audio signals and one contact closure over one multimode or single mode optical fiber. A bidirectional model, FXA2C1(M,S)1, is also available. The modules use 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio.\u003c\/p\u003e\n\u003cp\u003ePlugand-play design ensures ease of installation and no electrical or optical adjustments are required. Bi-color LED indicators confirm operational status. Packaged in the exclusive Comnet ComFit housing, these units may be either wall or rack mounted.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic Electronic Current Limiting\u003c\/li\u003e\n\u003cli\u003eFailure Relay Loss of Power Indication\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required\u003c\/li\u003e\n\u003cli\u003eVoltage transient protection on all power and signal input\/output lines provides protection from power surges and other voltage transient events\u003c\/li\u003e\n\u003cli\u003eStandard ComFit models are hot-swappable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the FRA2C1S1 part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57531949810037,"sku":"FRA2C1S1","price":469.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/FRA2C1S1.jpg?v=1787961631"},{"product_id":"veracity-poe-extender-highwire-powerstar-xt-poe-eoc-ext","title":"Veracity HIGHWIRE POWERSTAR XT, POE EOC, EXT PoE extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity HIGHWIRE POWERSTAR XT, POE EOC, EXT is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis page covers Veracity part HIGHWIRE POWERSTAR XT, POE EOC, EXT. Everything below is recorded against that exact part number rather than against the wider range it belongs to.\u003c\/p\u003e\n\u003cp\u003eThe figures held against it cover rohs compliance, weee compliance among others. Anything not listed we have not stated.\u003c\/p\u003e\n\u003cp\u003eAsk us before you order if you need something confirmed. We will check it against the manufacturer's own documentation and tell you what it says.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoHS compliance:\u003c\/strong\u003e Recorded as compliant with the Restriction of Hazardous Substances rules, which limit specified hazardous materials in electrical equipment. This is the figure the record carries for this exact part number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWEEE compliance:\u003c\/strong\u003e Recorded as compliant with the Waste Electrical and Electronic Equipment rules, which govern how the product is taken back and recycled at end of life. Parts in the same family can differ here, so check the code rather than the family.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse cases\u003c\/h3\u003e\n\u003cp\u003eSpecify this part where the PoE extender role is already decided. The record carries no placement or mounting entry, so nothing is stated here about where it belongs. Confirm the siting against the manufacturer's own documentation before ordering.\u003c\/p\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the HIGHWIRE POWERSTAR XT, POE EOC, EXT part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57531977007477,"sku":"HIGHWIRE POWERSTAR XT, POE EOC, EXT","price":383.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/HIGHWIRE-POWERSTAR-XT-POE-EOC-EXT.jpg?v=1787966945"},{"product_id":"veracity-network-extender-vor-orl-gxt","title":"Veracity VOR-ORL-GXT network extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity VOR-ORL-GXT is a network extender from the OUTREACH Lite range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOUTREACH Lite G delivers gigabit Ethernet at twice the normal distance\u003c\/p\u003e\n\u003cp\u003eSimply connect an OUTREACH Lite G in line with the network cable and instantly double network range to 200 metres (656 ft). Gigabit Ethernet is commonly used for Local Area Network (LAN) installations, although 100Base-TX is often used for single IP camera connections. As IP devices become more diverse, many applications demand network connections that exceed the maximum 100 metres (328 feet) distance limit for cabled Ethernet.\u003c\/p\u003e\n\u003cp\u003eOUTREACH Lite G provides an instant solution to this restriction for gigabit Ethernet connections (a 100Base-TX only version of OUTREACH Lite is also available - see table on next page). Simply connect an OUTREACH Lite G in the middle of a network cable run to double the available range to 200 metres (656 feet). Simple installation\u003c\/p\u003e\n\u003cp\u003eOUTREACH Lite G takes advantage of the universal 802.3af\/at\/bt POE standards, so it can draw its own power from the network connection. No local power is required, therefore OUTREACH Lite G can be located exactly where it is needed. If your network switch has POE, simply connect OUTREACH Lite G up to 100 metres from the switch, and it will deliver another 100 metres reach over regular Cat5e or similar cable (Diagram 1).\u003c\/p\u003e\n\u003cp\u003eIf POE is not available, the link can easily be upgraded using a low-cost POE injector such as Veracity's gigabit compatible OUTSOURCE. No set-up or network configuration is required, as OUTREACH Lite G automatically sets up network speed, duplex and crossover on connection, and does not require an IP or MAC address. Go further\u003c\/p\u003e\n\u003cp\u003eIf POE and network extension beyond 200 metres (656 feet) is required, Veracity's OUTREACH Max G may be installed to extend Ethernet and POE to OUTREACH Lite G. For example, a 300 metre (984 feet) connection between a POE switch and another network device can be achieved by fitting an OUTREACH Max G at 100 metres along the cable, followed by 100m then an OUTREACH Lite G, and up to 100m to the gigabit network device. For longer Ethernet runs, Veracity recommends LONGSPAN long distance point-to-point devices, which can achieve 100Base-TX connections with POE at up to 820m (2,690ft).\u003c\/p\u003e\n\u003cp\u003eNo restrictions\u003c\/p\u003e\n\u003cp\u003eBecause OUTREACH Max G and OUTREACH Lite G simply restore the network connection every 100 metres, the full bandwidth of gigabit Ethernet is maintained across the entire link. This maximises performance and transparency, with no risk of a reduced or unpredictable bandwidth, even at distances of several hundred metres or more.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIP66\/67 Nema 4X\/6P tough enclosure for external installation\u003c\/li\u003e\n\u003cli\u003eInstantly doubles gigabit cable range to 200m s\u003c\/li\u003e\n\u003cli\u003eExtend an additional 100m s per unit with multiple units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the VOR-ORL-GXT part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57531977040245,"sku":"VOR-ORL-GXT","price":266.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/VOR-ORL-GXT.jpg?v=1787966970"},{"product_id":"comnet-network-extender-cllfe16poeu","title":"Comnet CLLFE16POEU network extender, Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLLFE16POEU is a network extender from the CL(L,R)FE(X)POE(C,U) range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine Ethernet over copper CL(L,R)FE(X)POE(C,U) Series supports up to sixteen channels of 10\/100Mbps Ethernet with PoE+ Power Injection and Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With the ability to connect directly to a PoE+ switch, or the ability to generate PoE+ power with a 48 to 56V input (Power Supply for PoE applications is sold separately) to either the Local or Remote ends, these units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. A complete set includes both a Local and Remote module.\u003c\/p\u003e\n\u003cp\u003eRemote units are available in small package sizes that include one or four channels, and Local modules are available in the same packages as well as a 1RU rack for larger channel counts.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eType tested to RFC-2544 TCP\/IP network bandwidth packet transmission standards\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003eStatus indicating LEDs provide rapid indication of critical operating parameters\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet\u003c\/li\u003e\n\u003cli\u003eComFit standard form factor is interchangeable between stand-alone or rack mount use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLLFE16POEU part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57533350707573,"sku":"CLLFE16POEU","price":4867.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLLFE16POEU.jpg?v=1788012228"},{"product_id":"dahua-technology-network-extender-pft1300","title":"Dahua Technology PFT1300 network extender, Silver","description":"\u003cp\u003e\u003cstrong\u003eDahua Technology PFT1300 is a network extender from the Network Transmission range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePoE extender.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooperate with High PoE Midspan\u003c\/strong\u003e (PFT1200), able to cascade level 2 PoE Extender, connect to 3 IPC (total power consumption =25W), max transmission distance 300m\u003c\/li\u003e\n\u003cli\u003e1*RJ45 10\/100M PoE power supply input; 1*RJ45 10\/100M supply power for IP Cam; 1*RJ45 10\/100M supply power for the next extender.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the PFT1300 part number rather than the description.\u003c\/p\u003e","brand":"Dahua Technology","offers":[{"title":"Default Title","offer_id":57533656793461,"sku":"PFT1300","price":33.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/PFT1300.jpg?v=1788015948"},{"product_id":"nitek-poe-extender-pvr164","title":"Nitek PVR164 Head-End Video, Power \u0026 Data Distribution Unit, 16 Cameras","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek PVR164 is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe new Nitek PVR164 is a head-end distribution system for video, power and data control. The system supports 16 cameras. The unit can be rack mounted at the head-end location.\u003c\/p\u003e\n\u003cp\u003eThe PVR164, part of the UTPLinks structured cabling system, is a self-contained video, power and data distribution unit that uses RJ45 jacks to combine video, power and data over a four-pair category cable to each camera location. The PVR164 allows a seamless transition from traditional coaxial installations to a future-proof UTP cabling infrastructure. The system is designed to easily integrate with other Nitek UTP video equipment.\u003c\/p\u003e\n\u003cp\u003eOnce connected, the PVR164 delivers camera voltage from the power insertion device to each camera location via a standard category cable. The cable terminates with a standard RJ45 jack for quick and secure connections. When used with a Nitek VB43ATF balun at the camera location, video, data and power are separated using Nitek’s reliable video balun technology.\u003c\/p\u003e\n\u003cp\u003eThe PVR164 and a DVR are ready to communicate within minutes by simply connecting a standard coaxial cable between the BNC outputs of the PVR164 and the BNC inputs of the DVR. The systems can also adapt to existing communication and computer network spare pairs or new cable installations. These units provide superior immunity to noise and interference, even when run in common raceways with AC.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality video over ordinary twisted pair cable\u003c\/li\u003e\n\u003cli\u003eVideo, power and data over one Category cable\u003c\/li\u003e\n\u003cli\u003eHigh i mmunity to noise and interference\u003c\/li\u003e\n\u003cli\u003eLEDs to indicate power and data detection\u003c\/li\u003e\n\u003cli\u003eRJ45 jacks for quick and secure connections\u003c\/li\u003e\n\u003cli\u003eCan utilize Nitek’s PS115 or any 3rd party power supply\u003c\/li\u003e\n\u003cli\u003eVideo can be run in the same cable with telephone, computer signals and power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the PVR164 part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57533667705205,"sku":"PVR164","price":718.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/PVR164.jpg?v=1788016356"},{"product_id":"veracity-transmitters-extender-vls-lsm-c","title":"Veracity VLS-LSM-C transmitters \u0026 extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity VLS-LSM-C is a transmitters \u0026amp; extender from the LONGSPAN range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Power and Bandwidth your IP Camera Needs, at Exceptional Distances\u003c\/p\u003e\n\u003cp\u003eLONGSPAN delivers unprecedented power and bandwidth over extreme lengths of regular Cat 5e or Cat 6 network cable, enabling a dependable connection to IP cameras and other remote network devices. LONGSPAN is a point-to-point solution. It self-configures for the best performance.\u003c\/p\u003e\n\u003cp\u003eNo set up or configuration is required. LONGSPAN even supports single-pair UTP cables, providing a fast upgrade solution for legacy analogue systems. LONGSPAN offers unrestricted 100Base-TX at a phenomenal 820 metres range, with POE-equipped models delivering full-power 802.3at POE Plus at 600 metres, LONGSPAN assures reliability in the most challenging scenarios.\u003c\/p\u003e\n\u003cp\u003eLONGSPAN is available in POE and data-only models. It is also available in high power Max single and Quad versions for the base and camera ends. See Documentation Tab for all datasheets including LONGSPAN Base 8, LONGSPAN Max and LONGSPAN Max Quad datasheets.\u003c\/p\u003e\n\u003cp\u003eUnrivalled range, uncompromised bandwidth\u003c\/p\u003e\n\u003cp\u003eIP cameras can demand peak network bandwidth of several times their average data rate while transmitting critical high-activity or low-light scenes. That's why LONGSPAN has been designed to support the full 200Mbps bandwidth required for reliable 100Base-TX Ethernet at up to 820 metres Cat 6 (or 690 metres Cat 5e). For even more extreme distances, LONGSPAN can automatically negotiate a 10Base-T connection, supporting a range in excess of 1000 metres, over ten times the conventional limit for cabled Ethernet.\u003c\/p\u003e\n\u003cp\u003eMore power, much further\u003c\/p\u003e\n\u003cp\u003eLONGSPAN models with POE can be powered from conventional IEEE 802.3af POE or 802.3at POE Plus and 802.3bt High Power POE switches and injectors, or Veracity's versatile power supply options can be specified for maximum range and power. The full 25 watts required for POE Plus devices is available at up to 600 metres Cat 6 when a Veracity power supply is used, or 5 to 20 watts can be delivered from other POE sources depending on range and cable type. LONGSPAN Max High Power devices are also now available up to 90W.\u003c\/p\u003e\n\u003cp\u003eUpgrade to IP, keep the UTP\u003c\/p\u003e\n\u003cp\u003eSites with legacy analogue cameras often use UTP baluns to send video over several hundred metres of twisted pair cable. LONGSPAN facilitates a simple upgrade path to IP for these installations. LONGSPAN can automatically detect and adapt to single-pair cables, and deliver the same uncompromised 10 or 100Base-TX connection up to 820 metres, assuring predictable IP video quality each and every time.\u003c\/p\u003e\n\u003cp\u003eHigh density, high reliability\u003c\/p\u003e\n\u003cp\u003eLONGSPAN's unique, expandable mounting system permits up to 24 channels to be mounted in just 1U of rack space, with configurable rear-mount power supplies available if desired. Smart diagnostic LEDs, including a SAFEVIEW® display on POE models, provide instant confirmation of cable-dependent power availability, and feedback of remote link status and other diagnostic information, for fast, confident installation.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLONGSPAN enhanced with 90W POE capability\u003c\/strong\u003e (802.3bt)\u003c\/li\u003e\n\u003cli\u003eLong range point-to-point Ethernet over Cat5e or Cat6 cable\u003c\/li\u003e\n\u003cli\u003eUnrestricted 100Base-TX with POE at over 820m s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the VLS-LSM-C part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57533895967093,"sku":"VLS-LSM-C","price":322.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/VLS-LSM-C.jpg?v=1788018352"},{"product_id":"nitek-network-extender-el1551u","title":"Nitek EL1551U network extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek EL1551U is a network extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EL1551U is a transmitter-receiver system which extends 100Mbps of Ethernet communication over a single pair of communication wires up to 460 meters (1500 feet) . The EL1551U is a component of the NITEK cutting edge EtherStretch Pro™ product line that turns any ordinary pair of wires, such as UTP or any 2 conductor cable into a high speed network communication path. The system is transparent to the network and requires very little installation time, with no setup or configuration needed.\u003c\/p\u003e\n\u003cp\u003eSimply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. The EL1551U system is ideal for upgrading analog UTP video balun systems to IP systems without needing to replace or even disturb the existing cable infrastructure. Power is provided to the ET1551U transmitter from the ER1551U receiver unit.\u003c\/p\u003e\n\u003cp\u003eLED indicators show the status and speed of network communications.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmentally hardened\u003c\/strong\u003e - meets NEMA TS-1\/TS-2\u003c\/li\u003e\n\u003cli\u003eTransmits up to distances of 460 meters (1500')\u003c\/li\u003e\n\u003cli\u003eSupports mega-pixel technology\u003c\/li\u003e\n\u003cli\u003eFully transparent to the network\u003c\/li\u003e\n\u003cli\u003eUpgrades systems from analog to IP cameras\u003c\/li\u003e\n\u003cli\u003eSupports 10\/100 over Twisted Pair cables\u003c\/li\u003e\n\u003cli\u003eEasy to install, no set up required\u003c\/li\u003e\n\u003cli\u003eNo MAC or IP addressing required\u003c\/li\u003e\n\u003cli\u003eLED indicators for network signals, link status and power\u003c\/li\u003e\n\u003cli\u003eOptional power supply can insert PoE power for non-PoE switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the EL1551U part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57534952276341,"sku":"EL1551U","price":406.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/EL1551U.jpg?v=1788047676"},{"product_id":"nitek-video-extender-receiver-er8500c","title":"Nitek ER8500C IP over Coax Extender Receiver, Gigabit PoE Switch, Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ER8500C is a video extender receiver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nitek Etherstretch™ ER8500C IP video over Coax multi-port Network Extender-Gigabit PoE Switch is a Receiver unit that operates with from 1 to 8 ET1543C Transmitter units (sold separately). The Etherstretch™ is another IP Video Transmission Solution from Nitek that allows for the utilization of existing coaxial infrastructure to both transmit IP network devices and to power them over the coax as well. The ER8500C Receiver and ET1543C units comprise a system which can transmit IP devices over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication and PoE path.\u003c\/p\u003e\n\u003cp\u003eWhen operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1640 feet). The ER8500C Coax Ethernet Extender Receiver along with the ET1543C Transmitters require very little installation time and absolutely no set up or configuration. The System is transparent to the network and has no IP or MAC addressing.\u003c\/p\u003e\n\u003cp\u003eSimply connect network devices to the network ports of the Transmitter and Receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power. An internal power supply in the ER8500C Receiver provides PoE to the system.\u003c\/p\u003e\n\u003cp\u003eThe Etherstretch Enterprise™ Coax Network Extender system extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransmits IP data; PoE up to distances of 500 meters (1640')\u003c\/li\u003e\n\u003cli\u003eRack mounted multi-channel (8) Etherstretch solution\u003c\/li\u003e\n\u003cli\u003eIncludes a built-in power source for all connected devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ER8500C part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57534952636789,"sku":"ER8500C","price":1756.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ER8500C.jpg?v=1788047799"},{"product_id":"nitek-network-extender-et1543c","title":"Nitek ET1543C network extender, Aluminum","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ET1543C is a network extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NITEK Etherstretch™ ET1543C IP cameras over Coax network extender Transmitter unit, is a network extender-PoE Inserter component. The ET1543C operates with either an ER8500C or ER16500C 8 or 16 Port IP Extender\/Gigabit PoE Switch Receiver Unit, to form a multi-channel IP extender \"over-coax\" system. The System transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication \u0026amp; PoE path.\u003c\/p\u003e\n\u003cp\u003eWhen operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1,640 feet). ET1543C Transmitter is part of a system that operates in conjunction with either a ER8500C Eight Port Receiver or ER16500C Sixteen Port Receiver (these receivers are sold separately).The ET1543C coax ethernet extender requires very little installation time \u0026amp; absolutely no set up or configuration. The ET1543C ethernet over coax network extender transmitter is transparent to the network and has no IP or MAC addressing.\u003c\/p\u003e\n\u003cp\u003eSimply connect your network devices to the network port of the transmitter along with existing coaxial cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks w\/ MC-500-R, MC-500-R8 or MC-500-R16\u003c\/li\u003e\n\u003cli\u003eMedia Converter Transmitter\u003c\/li\u003e\n\u003cli\u003eIP over Coax cable\u003c\/li\u003e\n\u003cli\u003eSupports any network device, including mega-pixel technology IP cameras\u003c\/li\u003e\n\u003cli\u003eEasy to install, no set up required\u003c\/li\u003e\n\u003cli\u003eLED indicators for network signals, link status and power\u003c\/li\u003e\n\u003cli\u003eOptional power supply can insert PoE power for non-PoE switches\u003c\/li\u003e\n\u003cli\u003eSurge protected inputs\u003c\/li\u003e\n\u003cli\u003eGround loop isolation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ET1543C part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57534952964469,"sku":"ET1543C","price":242.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ET1543C.jpg?v=1788047931"},{"product_id":"veracity-network-extender-vhw-hwps-cbb","title":"Veracity VHW-HWPS-CBB network extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity VHW-HWPS-CBB is a network extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEthernet and POE over coax device for inside IP camera housing.HIGHWIRE Powerstar uses existing coax cable to connect and power IP cameras without re-cabling costs. Designed for camera backboxes and housings\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Camera Housing\u003c\/strong\u003e - Analog Coax to Ethernet IP camera media converter that supports POE+\u003c\/li\u003e\n\u003cli\u003eWorks with any IP camera or device\u003c\/li\u003e\n\u003cli\u003ePlug and Play\u003c\/li\u003e\n\u003cli\u003eSAFEVIEW™ instantly checks connection + power status\u003c\/li\u003e\n\u003cli\u003eCompatible with all HIGHWIRE Powerstar Base units\u003c\/li\u003e\n\u003cli\u003eSimple fast, cost-effective installation\u003c\/li\u003e\n\u003cli\u003eFull 100Base-TX Ethernet performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the VHW-HWPS-CBB part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57534974198133,"sku":"VHW-HWPS-CBB","price":214.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/VHW-HWPS-CBB.jpg?v=1788053519"},{"product_id":"d-link-gigabit-poe-extender-dpe-302ge","title":"D-Link DPE-302GE gigabit PoE extender, Black","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD-Link DPE-302GE is a gigabit PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExtend your network\u003c\/p\u003e\n\u003cp\u003eThe DPE-302GE 2-Port Gigabit PoE Extender allows a Gigabit Power-over-Ethernet connection to be extended by up to 100 m per extender, to a massive maximum of 500 m in a daisy chain of extenders. Connect huge spaces\u003c\/p\u003e\n\u003cp\u003eTwo ports in combination with more connected extenders enable you to bring power and data to security cameras, and monitoring and telecommunication systems, even across vast areas like university campus sites, large retail stores, libraries, airports and transportation tunnels. Protected\u003c\/p\u003e\n\u003cp\u003eThe extender has D-Link's highest built-in 4kV surge protection, and is also capable of operating in temperatures of up to 60 °C (140 °F), allowing it to be deployed in harsher environments. Ready to go\u003c\/p\u003e\n\u003cp\u003eCombined with three flexible methods of mounting: a powerful built-in magnet with anti-slip rubber feet, supplied screw anchors, and included velcro, the DPE-302GE is ready to use straight out of the box and can be deployed virtually anywhere. With Networks in Mind\u003c\/p\u003e\n\u003cp\u003eDesigned to supply data, whether you need 10 to 1000 Mbps, and PoE power to devices such as IP surveillance cameras and wireless access points over extended distances. Power to Devices\u003c\/p\u003e\n\u003cp\u003eBecause the DPE-302GE is powered by consuming a very small fraction of PoE power, you can extend the connection distance beyond 100 m as well as power devices without worrying about finding a nearby power outlet, giving you the freedom to design your network layout. Robust design\u003c\/p\u003e\n\u003cp\u003eA discreet matte black design with jet black rims, air vents to regulate airflow, and 3 digital blue LED lights to indicate the connected power supply and show you exactly which direction your power and data flows.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMultiple mounting options for flexible placement\u003c\/li\u003e\n\u003cli\u003eProvides power over existing network cabling to remote PoE-capable devices\u003c\/li\u003e\n\u003cli\u003eBuilt-in 4 kV surge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the DPE-302GE part number rather than the description.\u003c\/p\u003e","brand":"D-Link","offers":[{"title":"Default Title","offer_id":57540329275765,"sku":"DPE-302GE","price":109.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/DPE-302GE.jpg?v=1788299068"},{"product_id":"comelit-pac-poe-repeater-ipswp02na","title":"Comelit PAC IPSWP02NA PoE repeater, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComelit PAC IPSWP02NA is a PoE repeater.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePoE repeater 10\/100\/1000 Mbps, standard IEEE802.3af\/at\/bt. 1 RJ45 input 95 W max., two RJ45 outputs 30 W each, range up to 100 m. Uses plug and play and operating indicator.\u003c\/p\u003e\n\u003cp\u003eOperating temperature -20°C to 60°C, waterproof IP67, vandalproof IK10.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports 10\/100\/1000 Mbps\u003c\/li\u003e\n\u003cli\u003eIEEE802.3af\/at\/bt Standard\u003c\/li\u003e\n\u003cli\u003e1 RJ45 Input, 95W Max\u003c\/li\u003e\n\u003cli\u003eTwo RJ45 Outputs, 30W Each\u003c\/li\u003e\n\u003cli\u003e100m Range Capability\u003c\/li\u003e\n\u003cli\u003ePlug and Play Installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temp\u003c\/strong\u003e: -20°C to 60°C\u003c\/li\u003e\n\u003cli\u003eWaterproof IP67 Rated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the IPSWP02NA part number rather than the description.\u003c\/p\u003e","brand":"Comelit PAC","offers":[{"title":"Default Title","offer_id":57540372595061,"sku":"IPSWP02NA","price":112.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/IPSWP02NA.jpg?v=1788300262"},{"product_id":"comnet-over-coax-converter-clfe1eoc","title":"Comnet CLFE1EOC over coax converter","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLFE1EOC is an over coax converter from the CLFE range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine® Ethernet over copper line supports up to sixteen channels of 10\/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP) or coaxial cable. The single-channel units may be powered by a PoE switch. Four, eight, and sixteen-channel units operate from local power.\u003c\/p\u003e\n\u003cp\u003eThese units provide the ultimate flexibility for extending a powered device (PD) over long-distance copper. DIP switches are provided for user selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization.\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 3,000 feet\u003c\/strong\u003e (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 5,000 feet\u003c\/strong\u003e (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial cable\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLFE1EOC part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57542917357941,"sku":"CLFE1EOC","price":329.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLFE1EOC.jpg?v=1788368985"},{"product_id":"nitek-extender-gigabit-poe-switch-er16500c","title":"Nitek ER16500C extender-gigabit PoE switch, Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ER16500C is an extender-gigabit PoE switch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nitek ER16500C Etherstretch™ Ethernet Extender over Coax multi-port network extender-Gigabit PoE Switch is a Receiver unit that operates with 1 to 16 ET1543C Transmitter units (sold separately). The Etherstretch™ solution allows for the utilization of existing coaxial infrastructure to both transmit IP cameras and other network devices and to power them over the coax as well. The ER16500C Receiver and ET1543C units comprise a system which can transmit IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication \u0026amp; PoE path.\u003c\/p\u003e\n\u003cp\u003eWhen operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1,640 feet). The ER16500C coax ethernet extender receiver along with the ET1543C transmitters require very little installation time \u0026amp; absolutely no set up or configuration. The System is transparent to the network and has no IP or MAC addressing.\u003c\/p\u003e\n\u003cp\u003eSimply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power. An internal power supply in the ER16500C Receiver provides PoE to the system.\u003c\/p\u003e\n\u003cp\u003eThe Etherstretch™ coax network extender system extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRack mounted multi-channel Etherstretch solution\u003c\/li\u003e\n\u003cli\u003eIncludes a built-in power source for all connected devices\u003c\/li\u003e\n\u003cli\u003eGigabit output to network\u003c\/li\u003e\n\u003cli\u003eGigabit output to network\u003c\/li\u003e\n\u003cli\u003eRemotely power and transmit IP devices over coax up to 500 meters\/1,640 feet\u003c\/li\u003e\n\u003cli\u003eShort circuit, over current and over voltage protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports IEEE802.3af\u003c\/strong\u003e (15.4W) and IEEE802.3at (25.5W)\u003c\/li\u003e\n\u003cli\u003eNo MAC or IP addressing required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable power input 100\u003c\/strong\u003e - 240V\u003c\/li\u003e\n\u003cli\u003eBuilt-in Ethernet and PoE surge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ER16500C part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57542963102069,"sku":"ER16500C","price":3392.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ER16500C.jpg?v=1788370406"},{"product_id":"nitek-poe-extender-et4500c","title":"Nitek ET4500C PoE extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ET4500C is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ET4500C is another component of the Nitek cutting-edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing cable infrastructure (coax). With the addition of an external power supply, this transmitter can supply PoE power to operate 4 IP cameras or other network devices.\u003c\/p\u003e\n\u003cp\u003eThe unit transmits data from the 4 IP network devices over the coax cable for distances up to 500 m (1640'). The ET4500C is a 4 port transmitter which can work with any of the Nitek multichannel Etherstretch receivers requiring very little installation time and absolutely no setup or configuration. These units quickly turn ordinary RG59 coax cable into a high-speed network communication and PoE pathway.\u003c\/p\u003e\n\u003cp\u003eThe ET4500C is transparent to the network thus requiring no IP and MAC addressing. Simply connect your network devices to the IP Ports of the transmitter, connect the transmitter to an Etherstretch branded receiver and the system begins communicating. LED indicators show the status of network communication and PoE power.\u003c\/p\u003e\n\u003cp\u003eThe ET4500C requires no network settings to be changed or adjusted.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports 4 network devices, including mega-pixel technology IP cameras\u003c\/li\u003e\n\u003cli\u003eSupports 10\/100 and PoE over RG59 cables up to distances of 500m\u003c\/li\u003e\n\u003cli\u003eEnvironmentally hardened\u003c\/li\u003e\n\u003cli\u003eFully transparent to the network\u003c\/li\u003e\n\u003cli\u003eBuilt-in surge protection\u003c\/li\u003e\n\u003cli\u003eEasy to install, no set up required\u003c\/li\u003e\n\u003cli\u003eNo MAC or IP addressing required\u003c\/li\u003e\n\u003cli\u003eLED Indicators for network signals, link status and power\u003c\/li\u003e\n\u003cli\u003eOptional power supply can insert PoE power for non-PoE switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ET4500C part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57542964642165,"sku":"ET4500C","price":734.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ET4500C.jpg?v=1788370566"},{"product_id":"nvt-phybridge-flex-extender-kit-nv-flxlk-xkit","title":"NVT Phybridge NV-FLXLK-XKIT flex extender kit, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNVT Phybridge NV-FLXLK-XKIT is a flex extender kit from the NV-FLX range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NVT Phybridge FLEX-Link Extender Kit is designed to supercharge the downlink ports of a standard Ethernet switch, enabling an IP endpoint from a single long run UTP cable to deliver fast Ethernet and PoE with up to 2,000ft (610m) reach - that's 6Xs the reach of standard Ethernet switches.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFLEX Link Extender Kit for long-reach PoE over UTP\u003c\/li\u003e\n\u003cli\u003eCovers base and extender for 10\/100 Mbps full-duplex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivers PoE+ up to 2,000 ft\u003c\/strong\u003e (610 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the NV-FLXLK-XKIT part number rather than the description.\u003c\/p\u003e","brand":"NVT Phybridge","offers":[{"title":"Default Title","offer_id":57543091552629,"sku":"NV-FLXLK-XKIT","price":480.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/NV-FLXLK-XKIT.jpg?v=1788386552"},{"product_id":"veracity-network-extender-vls-1p-cc","title":"Veracity VLS-1P-CC network extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity VLS-1P-CC is a network extender from the LONGSTAR range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHIGHWIRE Longstar delivers a full bandwidth 100Base-T network signal and POE Plus over unsurpassed lengths of regular coaxial cable. It provides the reassurance of exceptional performance and reliability, while enabling considerable savings in the cost, time and risk of upgrading legacy analogue camera installations to IP. A range of 540 - 690 metres with RG-59 or even up to 1400 metres with RG-11 is supported, without compromising the 100Base-T data rate.\u003c\/p\u003e\n\u003cp\u003eFor even greater distances it can automatically configure to 10Base-T operation, running approximately three times further with data only. Models with optional POE in or out can deliver the full 25 watts of 802.3at POE Plus to cameras over the same legacy cable.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnrestricted 100Base-T and POE over 1400m (4,600ft) on RG11\u003c\/li\u003e\n\u003cli\u003eBS EN 50121-4 compliant (rail and metro)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 4.2km\u003c\/strong\u003e (2.5 mi)data-only link at 10Base-T without POE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the VLS-1P-CC part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57543233962357,"sku":"VLS-1P-CC","price":268.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/VLS-1P-CC.jpg?v=1788392216"},{"product_id":"nitek-extender-poe-switch-er16500u","title":"Nitek ER16500U extender PoE+ switch","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ER16500U is an extender PoE+ switch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNitek 16 Port Ethernet Switch and Network PoE+ Extender\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemotely powers network devices and transmits IP data over network category cables up to 600 meters\/1968 feet\u003c\/li\u003e\n\u003cli\u003eIncludes a built-in power source for all connected devices\u003c\/li\u003e\n\u003cli\u003eSFP ports support Fiber interfacing\u003c\/li\u003e\n\u003cli\u003eShort circuit, over-current and over-voltage protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports IEEE802.3af\u003c\/strong\u003e (15.4W) and IEEE802.3at (25.5W)\u003c\/li\u003e\n\u003cli\u003eMade in the U.S. A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ER16500U part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57546207887733,"sku":"ER16500U","price":3523.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ER16500U.jpg?v=1788464422"},{"product_id":"nitek-over-utp-transmitter-et4500u","title":"Nitek ET4500U over UTP transmitter","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ET4500U is an over UTP transmitter.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EL4500U system uses a four channel Transmitter and a single channel Receiver to extend Ethernet and PoE. The EL4500U can be used on new or existing cable and is designed to greatly extend the distances to which IP network devices can operate. In addition to network communication the EL450U is ideal for PoE applications.\u003c\/p\u003e\n\u003cp\u003eIt allows all power to flow from the head end for most camera applications. In unique cases where high power PoE is needed it can inject up to 25 watts of power at the Transmitter end. The EL4500U is another component of the Nitek cutting edge Etherstretch™ line.\u003c\/p\u003e\n\u003cp\u003eThis Environmentally Hardened Etherstretch™ link solution allows for the utilization of existing or the installation of new Category Communication (UTP) cabling. With the addition of an external power supply (PS48), this transmission set can supply PoE power to operate 4 IP network devices. The link system transmits data from the 4 IP network devices over the four pair UTP cable for distances up to 600 meters (1968 feet).\u003c\/p\u003e\n\u003cp\u003eThe EL4500U is a 4 port Transmitter and Receiver link set which can work with any of the standard network switch requiring very little installation time and absolutely no set up or configuration. These units quickly turn ordinary UTP cable into a high speed network communication pathway. The EL4500U is transparent to the network requiring no IP and MAC addressing.\u003c\/p\u003e\n\u003cp\u003eSimply connect your network devices to the IP Ports of the Transmitter, connect the Transmitter to the Etherstretch™ branded UTP Receiver and the system begins communicating. LED indicators show the status of network communication and PoE power. The EL4500U requires no network settings to be changed or adjusted.\u003c\/p\u003e\n\u003cp\u003eThe Nitek Etherstretch™ EL4500U extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The EL4500U is ideal for retrofitting existing installations.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports 10\/100 and PoE over Category cables up to distances of 600 meters (1968')\u003c\/li\u003e\n\u003cli\u003eFully transparent to the network\u003c\/li\u003e\n\u003cli\u003eSupports 4 network devices, including mega-pixel technology IP cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ET4500U part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57546208838005,"sku":"ET4500U","price":874.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ET4500U.jpg?v=1788464570"},{"product_id":"dahua-technology-poe-extender-pft1500","title":"Dahua Technology PFT1500 PoE extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDahua Technology PFT1500 is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the Dahua Technology PFT1500, a versatile 5-Port PoE Extender designed to enhance your network connectivity. This device features four Power over Ethernet (PoE) output ports, allowing you to power multiple devices simultaneously, while the single PoE input port ensures seamless integration into your existing setup. Ideal for both home and business environments, the PFT1500 simplifies your networking needs with its reliable performance and user-friendly design.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4x 100 Mbps PoE Ethernet ports, 1x1000 Mbps PoE Ethernet port\u003c\/li\u003e\n\u003cli\u003eAll ports meet the requirements of IEEE802.3af and IEEE802.3at standards\u003c\/li\u003e\n\u003cli\u003eThe red ports also conform with Hi-PoE and IEEE802.3bt standards\u003c\/li\u003e\n\u003cli\u003e250 m long-distance PoE transmission, which can be enabled by the DIP switch\u003c\/li\u003e\n\u003cli\u003ePoE Watchdog for real-time detection of terminal device status\u003c\/li\u003e\n\u003cli\u003eFanless\u003c\/li\u003e\n\u003cli\u003eFull-metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightning Protection\u003c\/strong\u003e - common mode - 4 kV, differential mode - 2 kV\u003c\/li\u003e\n\u003cli\u003eDesktop mount and DIN-rail mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the PFT1500 part number rather than the description.\u003c\/p\u003e","brand":"Dahua Technology","offers":[{"title":"Default Title","offer_id":57546245538165,"sku":"PFT1500","price":96.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/PFT1500.jpg?v=1788469264"},{"product_id":"trendnet-gigabit-poe-extender-ti-e100","title":"TRENDnet TI-E100 gigabit PoE+ extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTRENDnet TI-E100 is a gigabit PoE+ extender from the TI range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTRENDnet's Industrial Gigabit PoE+ Extender, model TI-E100, takes a single PoE+ connection and extends it an additional 100m (328') for remote PoE\/PoE+ device installation. The industrial PoE+ extender auto-detects a PoE or PoE+ connection, and then extends it for a total distance of up to 200m (656') from the PoE+ power source equipment. The TI-E100 industrial PoE+ extender features a convenient wall mountable design for installation flexibility.\u003c\/p\u003e\n\u003cp\u003eDaisy-chain up to two industrial PoE+ extenders for a total PoE+ network extension of 300m (984').\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003cli\u003eExtends 100m for a total distance of up to 200m (656 ft.)\u003c\/li\u003e\n\u003cli\u003eDaisy chain up to 2 units for a total PoE network extension of up to 300m (984 ft.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports PoE\u003c\/strong\u003e (15.4W) and PoE+ (30W)\u003c\/li\u003e\n\u003cli\u003eDurable IP30 rated metal housing\u003c\/li\u003e\n\u003cli\u003eConvenient wall mountable design\u003c\/li\u003e\n\u003cli\u003eNo external power adapter required\u003c\/li\u003e\n\u003cli\u003eNDAA \/ TAA compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the TI-E100 part number rather than the description.\u003c\/p\u003e","brand":"TRENDnet","offers":[{"title":"Default Title","offer_id":57546275619189,"sku":"TI-E100","price":130.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/TI-E100.jpg?v=1788473278"},{"product_id":"veracity-poe-extender-vor-orm-g","title":"Veracity VOR-ORM-G PoE extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity VOR-ORM-G is a PoE extender from the OUTREACH range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOUTREACH Max G extends gigabit Ethernet to 200 metres with full POE pass-through, ideal for deployment of wireless access points and IP cameras. Simply connecting an OUTREACH Max G in line with the network cable instantly doubles the range from 100 metres (328 ft) to 200 metres (656 ft) with POE.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstantly doubles gigabit cable range to 200m s\u003c\/li\u003e\n\u003cli\u003eFull gigabit Ethernet\u003c\/li\u003e\n\u003cli\u003eExtends POE and POE Plus up to 90W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the VOR-ORM-G part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57546287055221,"sku":"VOR-ORM-G","price":221.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/VOR-ORM-G.jpg?v=1788474301"},{"product_id":"vanco-analog-audio-extender-280756","title":"Vanco 280756 analog audio extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVanco 280756 is an analog audio extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the Vanco 280756 Passive Analog Audio Extender, designed for seamless audio transmission over long distances. This innovative device allows you to extend audio signals up to an impressive 240'using just a single CAT5e or CAT6 cable, making it perfect for various setups. With dual RCA connectors, it caters to stereo applications effortlessly.\u003c\/p\u003e\n\u003cp\u003eEnjoy the convenience of a bi-directional design, enabling audio to flow in either direction without the need for a power supply. Plus, it's TAA compliant, ensuring quality and reliability. Elevate your audio experience today with the Vanco 280756!\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows audio signals via stereo connection to be transmitted and extended using a single CAT5e\/CAT6 cable\u003c\/li\u003e\n\u003cli\u003eExtends audio up to 240'\u003c\/li\u003e\n\u003cli\u003eFeatures dual RCA connectors for stereo applications\u003c\/li\u003e\n\u003cli\u003eNo power supply needed\u003c\/li\u003e\n\u003cli\u003eBi-directional as audio can travel either way\u003c\/li\u003e\n\u003cli\u003eTAA Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 280756 part number rather than the description.\u003c\/p\u003e","brand":"Vanco","offers":[{"title":"Default Title","offer_id":57548536283509,"sku":"280756","price":32.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/280756.jpg?v=1788530469"},{"product_id":"comnet-over-utp-extender-clfe4eou","title":"Comnet CLFE4EOU over UTP extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLFE4EOU is an over UTP extender from the CLFE range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine® Ethernet over copper line supports up to sixteen channels of 10\/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power.\u003c\/p\u003e\n\u003cp\u003eThese units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization.\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 3,000 feet\u003c\/strong\u003e (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 5,000 feet\u003c\/strong\u003e (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial cable\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3af standard for Power over Etherne\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLFE4EOU part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57549074465141,"sku":"CLFE4EOU","price":899.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLFE4EOU.jpg?v=1788539064"},{"product_id":"comnet-ethernet-over-coax-extender-cllfe4poec","title":"Comnet CLLFE4POEC ethernet-over-coax extender, Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLLFE4POEC is an ethernet-over-coax extender from the CL(L,R)FE(X)POE(C,U) range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine Ethernet over copper CL(L,R)FE(X)POE(C,U) Series supports up to sixteen channels of 10\/100Mbps Ethernet with PoE+ Power Injection and Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With the ability to connect directly to a PoE+ switch, or the ability to generate PoE+ power with a 48 to 56V input (Power Supply for PoE applications is sold separately) to either the Local or Remote ends, these units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. A complete set includes both a Local and Remote module.\u003c\/p\u003e\n\u003cp\u003eRemote units are available in small package sizes that include one or four channels, and Local modules are available in the same packages as well as a 1RU rack for larger channel counts.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eType tested to RFC-2544 TCP\/IP network bandwidth packet transmission standards\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003eStatus indicating LEDs provide rapid indication of critical operating parameters\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet\u003c\/li\u003e\n\u003cli\u003eComFit standard form factor is interchangeable between stand-alone or rack mount use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLLFE4POEC part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57549074596213,"sku":"CLLFE4POEC","price":1335.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLLFE4POEC.jpg?v=1788539084"},{"product_id":"comnet-ethernet-over-coax-extender-clrfe1poec","title":"Comnet CLRFE1POEC ethernet-over-coax extender, Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLRFE1POEC is an ethernet-over-coax extender from the CL(L,R)FE(X)POE(C,U) range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine Ethernet over copper CL(L,R)FE(X)POE(C,U) Series supports up to sixteen channels of 10\/100Mbps Ethernet with PoE+ Power Injection and Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With the ability to connect directly to a PoE+ switch, or the ability to generate PoE+ power with a 48 to 56V input (Power Supply for PoE applications is sold separately) to either the Local or Remote ends, these units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. A complete set includes both a Local and Remote module.\u003c\/p\u003e\n\u003cp\u003eRemote units are available in small package sizes that include one or four channels, and Local modules are available in the same packages as well as a 1RU rack for larger channel counts.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eType tested to RFC-2544 TCP\/IP network bandwidth packet transmission standards\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003eStatus indicating LEDs provide rapid indication of critical operating parameters\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet\u003c\/li\u003e\n\u003cli\u003eComFit standard form factor is interchangeable between stand-alone or rack mount use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLRFE1POEC part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57549074760053,"sku":"CLRFE1POEC","price":459.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLRFE1POEC.jpg?v=1788539108"},{"product_id":"amg-systems-ethernet-extender-amg160-1f-1et","title":"AMG Systems AMG160-1F-1ET ethernet extender, Grey","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAMG Systems AMG160-1F-1ET is an ethernet extender from the AMG160 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAMG’s Extend-Net industrial Ethernet extenders provide 10\/100Mb Ethernet over long distances of 2-wire twisted pair cable with support for pass-through 30W PoE. These single channel models feature screw terminal connectors and support distances up to 1Km.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact size\u003c\/strong\u003e – ideal for confined spaces, including conduit, camera poles and roadside cabinets\u003c\/li\u003e\n\u003cli\u003e40°C to +75°C temperature maintains performance in extreme conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 550m\u003c\/strong\u003e (1,800 ft) at 100Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 1000m\u003c\/strong\u003e (3,280 ft) at 10Mbps\u003c\/li\u003e\n\u003cli\u003eSupports 15W \u0026amp; 30W PoE Pass-Through\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the AMG160-1F-1ET part number rather than the description.\u003c\/p\u003e","brand":"AMG Systems","offers":[{"title":"Default Title","offer_id":57551782478197,"sku":"AMG160-1F-1ET","price":224.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/AMG160-1F-1ET.jpg?v=1788705594"},{"product_id":"comnet-network-extender-clfe16eoc","title":"Comnet CLFE16EOC network extender, Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLFE16EOC is a network extender from the CLFE range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine® Ethernet over copper line supports up to sixteen channels of 10\/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power.\u003c\/p\u003e\n\u003cp\u003eThese units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization.\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 3,000 feet\u003c\/strong\u003e (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 5,000 feet\u003c\/strong\u003e (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial cable\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLFE16EOC part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57552200335733,"sku":"CLFE16EOC","price":2706.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLFE16EOC.jpg?v=1788707842"},{"product_id":"comnet-remote-small-extender-clrfe1poeu","title":"Comnet CLRFE1POEU remote small extender, Rail Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLRFE1POEU is a remote small extender from the CL(L,R)FE(X)POE(C,U) range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine® Ethernet over copper CL(L,R)FE(X)POE(C,U) Series supports up to sixteen channels of 10\/100Mbps Ethernet with PoE+ Power Injection and Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With the ability to connect directly to a PoE+ switch, or the ability to generate PoE+ power with a 48 to 56 V input* to either the Local or Remote ends, these units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. A complete set includes both a Local and Remote module.\u003c\/p\u003e\n\u003cp\u003eRemote units are available in small package sizes that include one or four channels, and Local modules are available in the same packages as well as a 1RU rack for larger channel counts.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemote\u003c\/li\u003e\n\u003cli\u003e1-Ch\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data Chs with PoE+ Power Injection or Pass-through PoE+ over standard UTP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Ethernet up to 3,000 feet\u003c\/strong\u003e (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable\u003c\/li\u003e\n\u003cli\u003eExtended temperature operation from -40°C to +75°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLRFE1POEU part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57552201482613,"sku":"CLRFE1POEU","price":480.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLRFE1POEU.jpg?v=1788707916"},{"product_id":"comnet-ethernet-over-utp-extender-clrfe4poeu","title":"Comnet CLRFE4POEU ethernet-over-utp extender, Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComnet CLRFE4POEU is an ethernet-over-utp extender from the CL(L,R)FE(X)POE(C,U) range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Comnet CopperLine Ethernet over copper CL(L,R)FE(X)POE(C,U) Series supports up to sixteen channels of 10\/100Mbps Ethernet with PoE+ Power Injection and Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With the ability to connect directly to a PoE+ switch, or the ability to generate PoE+ power with a 48 to 56V input (Power Supply for PoE applications is sold separately) to either the Local or Remote ends, these units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. A complete set includes both a Local and Remote module.\u003c\/p\u003e\n\u003cp\u003eRemote units are available in small package sizes that include one or four channels, and Local modules are available in the same packages as well as a 1RU rack for larger channel counts.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 10\/100 Mbps Bandwidth\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, Unicast and Jumbo Frame\u003c\/li\u003e\n\u003cli\u003eSymmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance\u003c\/li\u003e\n\u003cli\u003eType tested to RFC-2544 TCP\/IP network bandwidth packet transmission standards\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate for maximum bandwidth and transmission distance utilization\u003c\/li\u003e\n\u003cli\u003eComplies with all major IEEE standards and RFC network protocols for UDP, TCP\/IP, HTTP\/HTTPs\u003c\/li\u003e\n\u003cli\u003eTransmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over standard UTP or Coaxial cable\u003c\/li\u003e\n\u003cli\u003eStatus indicating LEDs provide rapid indication of critical operating parameters\u003c\/li\u003e\n\u003cli\u003eExtended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet\u003c\/li\u003e\n\u003cli\u003eComFit standard form factor is interchangeable between stand-alone or rack mount use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the CLRFE4POEU part number rather than the description.\u003c\/p\u003e","brand":"Comnet","offers":[{"title":"Default Title","offer_id":57552201580917,"sku":"CLRFE4POEU","price":1235.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/CLRFE4POEU.jpg?v=1788707943"},{"product_id":"nitek-poe-extender-ee328","title":"Nitek EE328 PoE extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek EE328 is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EE328 is a single-unit IP Network and PoE repeater requiring minimal installation time and no setup or configuration. Installation involves simply connecting the unit in line with the network run. Each unit extends the cable run by 100 metres or 328 feet.\u003c\/p\u003e\n\u003cp\u003eThe EE328 Ethernet repeater draws power from the PoE network switch and extends the power for the next 100 metres. If the network switch is not a PoE device, the EE328 has an optional power input and can also function as a PoE inserter in addition to extending network communication signals. The EE328 is fully 802.3af compliant as a PoE source and device.\u003c\/p\u003e\n\u003cp\u003eIt is ideal for extending network or PoE signals. LED lights clearly indicate the status of network communication and PoE power. The EE328 requires no network settings to be changed or adjusted.\u003c\/p\u003e\n\u003cp\u003eThe EE328 extends and repeats network communications to overcome cable distance limitations, offering connections to devices in locations where traditional networking does not allow.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtends existing Ethernet Network 10\/100 cable runs additional 100m\/328ft\u003c\/li\u003e\n\u003cli\u003eBuilt-in Surge protection\u003c\/li\u003e\n\u003cli\u003eUnit powered by PoE input or external power supply, passes PoE through. Optional power supply can insert PoE power for non-PoE switches\u003c\/li\u003e\n\u003cli\u003eCan be daisy-chained for additional distance\u003c\/li\u003e\n\u003cli\u003eFully transparent to the network\u003c\/li\u003e\n\u003cli\u003eEasy to install, no set up required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the EE328 part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57552211411317,"sku":"EE328","price":133.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/EE328.jpg?v=1788708951"},{"product_id":"nitek-extender-transmitter-unit-et1500u","title":"Nitek ET1500U extender transmitter unit","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ET1500U is an extender transmitter unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nitek Etherstretch™ ET1500U Network Extender Transmitter extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The ET1500U is designed for use with the ER8400U, ER8500U and ER16500U. The Etherstretch™ ET1500U IP Network Extender-PoE Inserter component.\u003c\/p\u003e\n\u003cp\u003eThe ET1500UW is part of a system that operates in conjunction with either a ER8400U, ER8500U or ER16500U 8 or 16 Port IP Extender\/Gigabit PoE Switch Receiver Unit (these receivers are sold separately), to form a multi-channel IP extender system that transmits IP cameras or other network devices well beyond standard network limitations. The Nitek Ethernet Extender Systems can turn standard network cables into a high speed network communication \u0026amp; PoE paths. When operating over category cables, UTP network extender system can operate for distances of up to 600 meters (1968 feet).\u003c\/p\u003e\n\u003cp\u003eThe ET1500UW Ethernet Extender Transmitter requires very little installation time and absolutely no set up or configuration. The ET1500U Ethernet Extender Transmitter is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the Transmitter along with existing cabling and the system begins communicating.\u003c\/p\u003e\n\u003cp\u003eLED indicators show the status of network communication and PoE power. When connected to a PoE switch, power from the switch is used as the power source for the connected ET1500U Transmitter. In applications where network switches are not PoE capable, an optional power inserter (IP1054 sold separately) can be used to insert power to the ET1500U Transmitter.\u003c\/p\u003e\n\u003cp\u003eThe power is sent from the Receiver over the UTP to the Transmitter. The Transmitter uses PoE as its power source and powers the connected PoE network device as well.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports 10\/100 and PoE over category rated cables up to distances of 600 meters (1968')\u003c\/li\u003e\n\u003cli\u003eSupports any network device, including Mega-pixel technology IP cameras\u003c\/li\u003e\n\u003cli\u003eLED indicators for network signals, link status and power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ET1500U part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57552216293749,"sku":"ET1500U","price":267.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ET1500U.jpg?v=1788709426"},{"product_id":"nvt-phybridge-network-extender-nv-ec-04-xkit","title":"NVT Phybridge NV-EC-04-XKIT network extender, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNVT Phybridge NV-EC-04-XKIT is a network extender from the CLEER range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NVT Phybridge EC4 Extender Kit is designed to supercharge the downlink ports of a standard Ethernet switch, enabling 4 IP endpoints from a single long run Coax cable to deliver fast Ethernet and PoE+ with up to 3,000ft (915m) reach - that’s 10Xs the reach of standard Ethernet switches.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows 4 IP endpoints from a single coax run via EC4 adapters\u003c\/li\u003e\n\u003cli\u003eWorks with EC Base \/ switch to extend PoE + data over coax links\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBundled kit simplifies deployment\u003c\/strong\u003e (adapter + base)\u003c\/li\u003e\n\u003cli\u003eExtend the reach of standard PoE switch\u003c\/li\u003e\n\u003cli\u003eSingle port coax extender solution enabling 4 IP endpoints from a single long run Coax cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\/100Mbps symmetrical\u003c\/strong\u003e (full duplex) and PoE+ (up to 30W) with up to 2,000ft (610m) reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the NV-EC-04-XKIT part number rather than the description.\u003c\/p\u003e","brand":"NVT Phybridge","offers":[{"title":"Default Title","offer_id":57552619733365,"sku":"NV-EC-04-XKIT","price":646.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/NV-EC-04-XKIT.jpg?v=1788713160"},{"product_id":"veracity-poe-external-camera-vls-lsm-cxt","title":"Veracity VLS-LSM-CXT LONGSPAN Max XT Camera-End Ethernet Extender, Outdoor, Silver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVeracity VLS-LSM-CXT is a PoE external camera.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Max Camera XT version of LONGSPAN is produced in an attractive, robust, weatherproof external housing, rated to IP66, IP67, IP68, Nema 4X and Nema 6. Hot or cold, rain or shine, LONGSPAN Max XT can handle it. Complete with wall or pole mounting-plate adaptor.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal version of LONGSPAN Max Camera\u003c\/li\u003e\n\u003cli\u003eLong range point-to-point Ethernet over Cat5e or Cat6 cable\u003c\/li\u003e\n\u003cli\u003eUnrestricted 100Base-TX at up to 820 meters\u003c\/li\u003e\n\u003cli\u003eCan deliver 60W at 200 meters, 40W at 350 meters\u003c\/li\u003e\n\u003cli\u003eSleek housing \u0026amp; cable glands rated to IP66\/67\/69- \u0026amp; Nema 4X\/6\u003c\/li\u003e\n\u003cli\u003eSmart power and diagnostic display for reliable installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the VLS-LSM-CXT part number rather than the description.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":57553069179253,"sku":"VLS-LSM-CXT","price":397.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/VLS-LSM-CXT.jpg?v=1788718469"},{"product_id":"nitek-poe-extender-ee328-s1","title":"Nitek EE328-S1 PoE extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek EE328-S1 is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nitek EE328-S1 IP Extender Bundle with Surge Protector is designed to extend network connections, supporting any network device including IP cameras, Megapixel, and 4K cameras. It operates fully transparently to the network, requiring no MAC or IP addressing, and is easy to install with no setup needed. The unit includes built-in surge protection and LED indicators for network signals, link status, and power.\u003c\/p\u003e\n\u003cp\u003eIt can be powered by PoE input or an external power supply, passing PoE through, with an optional power supply available for non-PoE switches. The extender transmits both data and PoE and can be daisy-chained to extend the network distance further.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports any network device, including IP cameras, Megapixel and 4K cameras\u003c\/li\u003e\n\u003cli\u003eFully transparent to the network\u003c\/li\u003e\n\u003cli\u003eEasy to install, no set up required\u003c\/li\u003e\n\u003cli\u003eNo MAC or IP addressing required\u003c\/li\u003e\n\u003cli\u003eBuilt-in Surge protection\u003c\/li\u003e\n\u003cli\u003eLED Indicators for Network signals, link status and power\u003c\/li\u003e\n\u003cli\u003eOptional power supply can insert PoE power for non-PoE switches\u003c\/li\u003e\n\u003cli\u003eUnit powered by PoE input or external power supply, passes PoE through\u003c\/li\u003e\n\u003cli\u003eTransmits data and PoE\u003c\/li\u003e\n\u003cli\u003eCan be daisy-chained for additional distance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the EE328-S1 part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57559343858037,"sku":"EE328-S1","price":193.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/EE328-S1.jpg?v=1788889957"},{"product_id":"nitek-poe-extender-ee328-w1","title":"Nitek EE328-W1 PoE extender","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek EE328-W1 is a PoE extender.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EE328W provides a weatherproof enclosure for the Network Repeater Unit EE328 that allows outdoor operation of repeating and extending Ethernet and PoE. The EE328 Ethernet and PoE Extender is designed to greatly extend the distance to which IP cameras and network devices can operate. The EE328 regenerates network communication and passes PoE power through itself and down the network cable.\u003c\/p\u003e\n\u003cp\u003eEach EE328 unit extends the cable run by 100m or 328'. When used with an optional 48VCD power supply the EE328 can operate as a fully independent repeater and IEEE802.3af PoE inserter. If needed, several EE328 units can be used in series to extend a network communication and PoE by every 100m or 328'. (max.\u003c\/p\u003e\n\u003cp\u003e5 extenders equals 600m or 1.968').\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports any network device, including IP cameras, Megapixel and 4K cameras\u003c\/li\u003e\n\u003cli\u003eFully transparent to the network\u003c\/li\u003e\n\u003cli\u003eEasy to install, no set up required\u003c\/li\u003e\n\u003cli\u003eNo MAC or IP addressing required\u003c\/li\u003e\n\u003cli\u003eBuilt-in Surge protection\u003c\/li\u003e\n\u003cli\u003eLED Indicators for Network signals, link status and power\u003c\/li\u003e\n\u003cli\u003eOptional power supply can insert PoE power for non-PoE switches\u003c\/li\u003e\n\u003cli\u003eUnit powered by PoE input or external power supply, passes PoE through\u003c\/li\u003e\n\u003cli\u003eTransmits data and PoE\u003c\/li\u003e\n\u003cli\u003eCan be daisy-chained for additional distance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the EE328-W1 part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57559344087413,"sku":"EE328-W1","price":200.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/EE328-W1.jpg?v=1788889968"},{"product_id":"nitek-extender-transmission-device-et1500c-ws1","title":"Nitek ET1500C-WS1 extender transmission device","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ET1500C-WS1 is an extender transmission device.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Etherstretch ET1500CWS Outdoor Ethernet over Coax network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK. The System includes a transmitter, surge suppression unit and a NEMA4X rated enclosure to house the transmitter and surge units. Operates with ER8500C or ER16500C Receiver Unit (purchase separately).\u003c\/p\u003e\n\u003cp\u003eTransmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication and PoE path. When operating over RG59U coaxial cable, the ethernet overcoax network extender system can operate for distances of up to 500m (1,640'). The ET1500CWS coax ethernet extender transmitter consists of a weatherproof enclosure which houses the transmitter and IPCOAX1 Surge Suppressor.\u003c\/p\u003e\n\u003cp\u003eRequires very little installation time and absolutely no set up or configuration. The The ET1500CW ethernet over coax network extender transmitter is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver devices along with existing cabling and the system begins communicating.\u003c\/p\u003e\n\u003cp\u003eLED indicators show the status of network communication and PoE power. When connected to a PoE switch, power from the switch is used as the power source for the connected ET1500CWS transmitter. In applications where network switches are not PoE capable, an optional power Inserter (IP1054 sold separately) can be used to insert power to the ET1500CWS transmitter.\u003c\/p\u003e\n\u003cp\u003eThe power is sent from the receiver over the coax to the transmitter. The transmitter uses PoE as its power source and powers the connected PoE network device as well. The ET1500CWS coax network extender transmitter extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNEMA4X Rated Enclosure to House Transmitter and Surge Suppressor\u003c\/li\u003e\n\u003cli\u003eIncludes a Nitek IPCOAX1 Surge Suppressor Unit\u003c\/li\u003e\n\u003cli\u003eTransmits up to distances of 500m \/ 1,640'\u003c\/li\u003e\n\u003cli\u003eSupports PoE and network communications\u003c\/li\u003e\n\u003cli\u003eSupports any network device, including IP cameras\u003c\/li\u003e\n\u003cli\u003eFully transparent to the network\u003c\/li\u003e\n\u003cli\u003eBuilt-in surge protection\u003c\/li\u003e\n\u003cli\u003eEasy to install, no set up required\u003c\/li\u003e\n\u003cli\u003eNo MAC or IP addressing required\u003c\/li\u003e\n\u003cli\u003eLED indicators for network signals, link status and power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ET1500C-WS1 part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57559357030773,"sku":"ET1500C-WS1","price":403.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ET1500C-WS1.jpg?v=1788890916"},{"product_id":"axis-communications-poe-extender-kit-01857-001","title":"Axis Communications 01857-001 PoE extender kit, Black","description":"\u003cp\u003e\u003cstrong\u003eAxis Communications 01857-001 is a PoE extender kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAXIS Long range PoE Extender kit offers a smart and easy-to-install solution for extending the range of your network and PoE. Without being restricted by the 100 m (328 ft.) limit for Ethernet cables, Axis network video products can be installed at greater distances. Simply connect AXIS Long range PoE Extender kit in-line with the CAT5e or CAT6 cable and power and data are forwarded to your Axis network devices.\u003c\/p\u003e\n\u003cp\u003eAXIS Long range PoE Extender kit supports both IEEE 802.3af and IEEE 802.3at compliant devices. With its rugged design, AXIS Long range PoE Extender kit withstands harsh environmental conditions and challenging temperatures.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtends Ethernet and PoE connections up to 1000m (3280')\u003c\/li\u003e\n\u003cli\u003eSupports IEEE 802.3af, IEEE 802.3at compliant devices\u003c\/li\u003e\n\u003cli\u003eNEMA TS2 Compatible\u003c\/li\u003e\n\u003cli\u003eCost efficient solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the 01857-001 part number rather than the description.\u003c\/p\u003e","brand":"Axis Communications","offers":[{"title":"Default Title","offer_id":57566644273525,"sku":"01857-001","price":588.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/01857-001.jpg?v=1789127308"},{"product_id":"nitek-coax-extender-receiver-er1500c","title":"Nitek ER1500C coax extender receiver","description":"\u003cp\u003e\u003cstrong\u003ePlease note: this is a non-returnable item (excluding faulty goods)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNitek ER1500C is a coax extender receiver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nitek ER1500C is an Ethernet PoE extender designed to work with Etherstretch switches, acting as an IP over Coax converter receiver. It requires compatible transmitters like ET1543C, ET1500C, or ET4500C to function and extends 10\/100 Mbps full duplex Ethernet and Power over Ethernet up to 500 meters via coaxial cable. Compatible with any IP network device and 4K cameras, it supports IEEE802.3at and IEEE802.3af standards for power delivery.\u003c\/p\u003e\n\u003cp\u003eThis device is network-transparent, needing no MAC or IP configuration. It features LED indicators for power, network rate, link status, and PoE output, and an optional power supply to add PoE to non-PoE switches. Safety features include protection against short circuits, overcurrent, and over-voltage, plus ground loop isolation.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIP over Coax Converter Receiver\u003c\/li\u003e\n\u003cli\u003eRequires ET1543C, ET1500C or ET4500C Transmitter for functionality\u003c\/li\u003e\n\u003cli\u003eExtends 10\/100 Mbps Full Duplex Ethernet \u0026amp; PoE up to 500 meters over coax\u003c\/li\u003e\n\u003cli\u003eSupports any IP network device \u0026amp; 4K cameras\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports IEEE802.3at\u003c\/strong\u003e (25.5W) and IEEE802.3af (15.4W)\u003c\/li\u003e\n\u003cli\u003eFully transparent to the network, no MAC or IP addressing required\u003c\/li\u003e\n\u003cli\u003eLED indicators for power, network rate, link status and PoE output\u003c\/li\u003e\n\u003cli\u003eThe optional power supply can insert PoE power for non-PoE switches\u003c\/li\u003e\n\u003cli\u003eShort circuit, over current and over-voltage protection\u003c\/li\u003e\n\u003cli\u003eGround loop isolation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the ER1500C part number rather than the description.\u003c\/p\u003e","brand":"Nitek","offers":[{"title":"Default Title","offer_id":57566985585013,"sku":"ER1500C","price":266.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/ER1500C.jpg?v=1789141322"}],"url":"https:\/\/wmestore.co.uk\/collections\/poe-extenders.oembed","provider":"WME","version":"1.0","type":"link"}