{"product_id":"knight-fire-security-shock-tilt-sensor-seismo-advancebk","title":"Knight Fire \u0026 Security SEISMO-ADVANCEBK shock\/tilt sensor, Black","description":"\u003cp\u003e\u003cstrong\u003eKnight Fire \u0026amp; Security SEISMO-ADVANCEBK is a shock\/tilt sensor from the SEISMO range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSEISMO-ADVANCE is a shock\/tilt sensor designed for Grade 3 installations. Operating at a standard nominal voltage of 12VDC, the following features can be configured on the PCB via shunt links: Detection mode (Shock, Tilt, Either, Both)\u003c\/p\u003e\n\u003cp\u003ePulse count (1, 2, 4, 6)\u003c\/p\u003e\n\u003cp\u003eComfort\/heartbeat LED (on\/off)\u003c\/p\u003e\n\u003cp\u003eShock\/tilt LED feedback (on\/off)\u003c\/p\u003e\n\u003cp\u003eEOL resistors (1k, 2k2, 4k1, 4k7, 5k6)\u003c\/p\u003e\n\u003cp\u003eAlarm resistors (1k, 2k2, 4k1, 4k7, 5k6, 6k8)\u003c\/p\u003e\n\u003cp\u003eFault resistors (2k2, 3k, 6k8, 12k)\u003c\/p\u003e\n\u003cp\u003eHigh sensitivity (on\/off)\u003c\/p\u003e\n\u003cp\u003eTamper protection is provided by a breakaway PCB section that detects removal from the fitting surface. A sprung microswitch detects removal of the product lid. The sensitivity of the unit is fine-tuned with an onboard potentiometer.\u003c\/p\u003e\n\u003cp\u003eThis unit has terminals for fault output – a mandatory feature for G3 installations. This output may be wired separately or incorporated into the EOL circuit so all signals use only two wires. A terminal is provided for wiring that allows the connected I\u0026amp;HAS to control the output of the LEDs – useful for enabling during walk testing and disabling otherwise.\u003c\/p\u003e\n\u003cp\u003eA latch terminal is also present – this terminal allows the unit to signal via LEDs that it has alarmed when the system is unset. Both the LED control and latch terminals should be wired to a suitably programmed output in the I\u0026amp;HAS. Note: Due to restrictions in EN50131 regarding ancillaries with logic control and alarm status visibility, this sensor cannot be wired as part of a shared zone without compromising the security grade of the system.\u003c\/p\u003e\n\u003cp\u003eComes complete with fitting screws and extra shunt links.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiscrete Tilt \u0026amp; Vibration Detection\u003c\/li\u003e\n\u003cli\u003eFault Output\u003c\/li\u003e\n\u003cli\u003eMulti-Resistor\u003c\/li\u003e\n\u003cli\u003eLED Feedback\u003c\/li\u003e\n\u003cli\u003eMicroswitch \u0026amp; Breakaway Tampers\u003c\/li\u003e\n\u003cli\u003eMade in UK\u003c\/li\u003e\n\u003cli\u003eEnvironmental Class II\u003c\/li\u003e\n\u003cli\u003ePulse count selectable on board\u003c\/li\u003e\n\u003cli\u003ePulse count selectable via serial link\u003c\/li\u003e\n\u003cli\u003eVibration and surface \/ tilt detection selectable on board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are matching this to an existing installation, work from the SEISMO-ADVANCEBK part number rather than the description.\u003c\/p\u003e","brand":"Knight Fire \u0026 Security","offers":[{"title":"Default Title","offer_id":57553031725429,"sku":"SEISMO-ADVANCEBK","price":34.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/SEISMO-ADVANCEBK.jpg?v=1788715455","url":"https:\/\/wmestore.co.uk\/products\/knight-fire-security-shock-tilt-sensor-seismo-advancebk","provider":"WME","version":"1.0","type":"link"}