{"product_id":"notifier-addressable-manual-call-point-m700kaci-ff","title":"Notifier Addressable Manual Call Point with Isolator, Flexible Element, M700KACI-FF","description":"\u003cp\u003eThe Notifier M700KACI-FF is an addressable manual call point for Notifier fire alarm control panels. It gives people in a building a way to raise the alarm by hand. It suits installers fitting or extending a loop, and comes with an in built isolator and a flexible element included.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFaults kept apart on the loop – integral loop isolation, built into the call point\u003c\/li\u003e\n\u003cli\u003eQuicker second fix – a terminal block reduces installation time, with no re-termination at commissioning\u003c\/li\u003e\n\u003cli\u003eEach device has its own identity – analogue addressable communications, with one of 99 addresses\u003c\/li\u003e\n\u003cli\u003eStatus you can see – an integral LED on the unit\u003c\/li\u003e\n\u003cli\u003eFunctional testing – a specialist test key goes into the bottom of the unit\u003c\/li\u003e\n\u003cli\u003eWorks alongside earlier kit – backward compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFor installers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePower: 15 V to 30VDC maximum. Quiescent 360µA, alarm current 6mA.\u003c\/li\u003e\n\u003cli\u003eMounting: semi-flush as standard, using a single gang back box with terminal tray ETT-P. Surface mounting uses back box SR1T.\u003c\/li\u003e\n\u003cli\u003eCabling: wire the terminal block during first fix, with link P102 giving continuity for testing.\u003c\/li\u003e\n\u003cli\u003eCompatibility: for Notifier's fire alarm control panel, with backward compatibility. Check your panel model against its documentation before ordering.\u003c\/li\u003e\n\u003cli\u003eStandards: fully compliant with EN54, Part 11. Ingress protection IP24D.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"mt-6\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4 class=\"product-description-title\"\u003eIs a back box needed for this call point?\u003c\/h4\u003e\n\u003cp\u003eYes, one way or another. Semi-flush mounting takes a single gang back box and terminal tray ETT-P, and surface mounting takes back box SR1T.\u003c\/p\u003e\n\u003ch4 class=\"product-description-title\"\u003eDoes it have a built in isolator?\u003c\/h4\u003e\n\u003cp\u003eYes. It is an addressable call point with in built isolator, giving integral loop isolation.\u003c\/p\u003e\n\u003ch4 class=\"product-description-title\"\u003eHow is the address set?\u003c\/h4\u003e\n\u003cp\u003eWith the two rotary decade switches on the rear of the unit. It uses one of 99 possible addresses.\u003c\/p\u003e\n\u003ch4 class=\"product-description-title\"\u003eCan it be used outdoors?\u003c\/h4\u003e\n\u003cp\u003eIt is for indoor use, with a rating of IP24D. Do not plan on it for outdoor positions.\u003c\/p\u003e\n\u003ch4 class=\"product-description-title\"\u003eCan a cover be fitted to stop accidental operation?\u003c\/h4\u003e\n\u003cp\u003eYes. Hinged transparent cover PS200 protects the element, and cover seal PS056 adds a seal that must break before the unit will operate.\u003c\/p\u003e\n\u003ch4 class=\"product-description-title\"\u003eIs the flexible element resettable?\u003c\/h4\u003e\n\u003cp\u003eDo not count on it. Resettable elements are a separate part, PS230, in a pack of 10, so check with the maker before relying on a reset.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Notifier","offers":[{"title":"Default Title","offer_id":57711096791413,"sku":"M700KACI-FF","price":79.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0050\/1216\/0612\/files\/notifier-m700kaci-ff-addressable-manual-call-point-angled-front-view.jpg?v=1793620844","url":"https:\/\/wmestore.co.uk\/products\/notifier-addressable-manual-call-point-m700kaci-ff","provider":"WME","version":"1.0","type":"link"}