Results per page 20 All

Intelligent control panel with visual alarm verification HUB2-WHITE

SKU: HUB2-WHITE
  • Device polling period from 12 seconds
  • Detection connection loss with a hub in 60 seconds
  • Operation on backup battery up to 15 hours
£207.90EX VAT
Add to Cart

Wireless touch keypad is used for arming/disarming of Ajax security system KeyPad-WHITE

SKU: KeyPad-White


Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.

 

Wireless touch keypad is used for arming/disarming of Ajax security system. It is mounted in the room near the entrance door to provide quick access to the keypad.

The device activates the full security mode by pressing one button

If the robber tries to enter the code, a hidden alarm signal can be sent to the Central Monitoring Station

The keypad is blocked automatically if the incorrect code is entered too many times

 

Principle of operation

The device operates security modes when a digital code is entered on the keypad. Indication notifies of current security status, problems with detectors or breakdown of communication with the hub.

Features

Alarm button is available. It notifies of each attempt to guess the password and blocks automatically if the permissible number of entries is exceeded.
 

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the keypad. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
 
£68.90EX VAT
Add to Cart

Wireless touch keypad is used for arming/disarming of Ajax security system KeyPad-BLACK

SKU: KeyPad-Black


Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.

 

Wireless touch keypad is used for arming/disarming of Ajax security system. It is mounted in the room near the entrance door to provide quick access to the keypad.

The device activates the full security mode by pressing one button

If the robber tries to enter the code, a hidden alarm signal can be sent to the Central Monitoring Station

The keypad is blocked automatically if the incorrect code is entered too many times

 

Principle of operation

The device operates security modes when a digital code is entered on the keypad. Indication notifies of current security status, problems with detectors or breakdown of communication with the hub.

Features

Alarm button is available. It notifies of each attempt to guess the password and blocks automatically if the permissible number of entries is exceeded.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the keypad. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
 
£68.90EX VAT
Add to Cart

Radio signal range extender supporting photo verification of alarms REX2-BLACK

SKU: REX2-BLACK

 


 

More applications of a security system 

Range extenders expand the boundaries of the protected area and give even more freedom to place security system devices. By connecting all or part of the devices 1 to ReX 2, you will ensure the security and automation of a business centre, estate, warehouse complex, or a large production facility.

5 range extenders can operate within the Ajax system to expand the coverage of the radio network up to 35 km2 2. Events and alarms are transmitted instantly, and the first photo verification snapshot is delivered to a monitoring station and users in just 13 seconds

Verification of alarms with snapshots

ReX 2 works with MotionCam and MotionCam Outdoor motion detectors. When triggered, they take a series of shots, helping to evaluate the events at a facility. Visual verification helps to instantly ascertain the situation, saving users from concerns and security companies from unnecessary patrol dispatches.

Guaranteed delivery of alarms and visual alarm verifications

To ensure reliable communications, we have equipped ReX 2 with four antennas and support of two proprietary radio protocols: Jeweller and Wings. Jeweller is responsible for the transmission of commands, events, and alarms, while Wings provides batch transmission of images. Ajax two-way radio communication uses frames to synchronize device communication sessions, authentication to prevent fraud, and encryption to protect against data theft. 

Radio communication through steel and concrete 

The next major OS Malevich update allows covering office centres with underground parking lots, sectional metal hangars, and warehouse complexes of several large buildings with a single Ajax system. Once the operating system is updated, ReX 2 will be able to connect to a hub both via radio communication and via Ethernet 4 â€” using the wire as a single or second communication channel.

Enhanced security system

ReX 2 works as an extra intelligent control panel: it connects devices into an autonomous group and takes over control at the right time. Thanks to automatic adjustment of signal strength and frame synchronization, any number of system devices can be connected to ReX 2 — the reliability of communication will not be affected by this. If, for some reason, radio communication with the hub is interrupted, ReX 2 will receive an alarm from a sensor and activate a siren to draw attention to the incident and deter the burglar.

Ready to resist intruder attacks

ReX 2 is protected from attacks at the software and hardware levels. It runs on the OS Malevich operating system, which is immune to viruses. All data transmitted by the range extender is encrypted. Thanks to the built-in backup battery, a sudden blackout at a facility will not be a problem.

Hassle-free installation

ReX 2 connection and configuration process saves the installation engineer time as much as possible. To add a range extender to a system, simply scan a QR-code with the Ajax app and assign it a name and a room. The device is also configured in real time in the app. If necessary, ReX 2 can be disabled or reconfigured without site visits.

 

  1. ReX 2 cannot be connected to another range extender, only to a hub.
  2. If five radio signal range extenders are used in the system.
  3. When transmitting images from MotionCam Outdoor (default settings) through ReX 2 range extender and the hub. The hub should be connected to the internet via Ethernet, Wi-Fi, or LTE. Delivery time with other resolution settings is available via link
  4. ReX 2 is equipped with an Ethernet port, but the functionality will become available with the OS Malevich update.

 

£119.90EX VAT
Add to Cart

6V PSU for Hub2 & Hub 2 Plus HUB2PSU/6V

SKU: HUB2PSU/6V
  • Compatibility – HHub 2 and Hub 2 Plus
  • Input voltage – 4.2-16 V
  • Output voltage – 4.8 V ± 5%
  • Switch-on voltage – 4.2 V ± 2.5%
  • Switch-off voltage – 3-3.4 V (depending on the load)
  • Input current – 2.2 A at 4.2 V; 0.5 A at 16 V
  • Output current – 1.5 A
  • Connection – Socket: 6,5 Ñ… 2 mm
                          Plug: 5.5 x 2.1 mm
  • Dimensions – 98 x 70 x 17 mm
  • Weight – 26 g
  • Complete set – 1. 6V PSU for Hub 2/Hub 2 Plus
                            2. Terminal adapter
                            3. Quick guide
£18.90EX VAT
Add to Cart
£505.90EX VAT
Add to Cart
£420.90EX VAT
Add to Cart

Starter kit for the Ajax security system HUB2KIT-WHITE-DD

SKU: HUB2KIT-WHITE-DD
£490.90EX VAT
Add to Cart

Starter kit for the Ajax security system HUB2KIT1-WHITE-DD

SKU: HUB2KIT1-WHITE-DD
£404.90EX VAT
Add to Cart
£319.90EX VAT
Add to Cart

Starter kit for the Ajax security system HUB2KIT1MP-WHITE-DD

SKU: HUB2KIT1MP-WHITE-DD
£303.90EX VAT
Add to Cart

Starter kit for the Ajax security system HUB2KIT1MP-BLACK-DD

SKU: HUB2KIT1MP-BLACK-DD
£303.90EX VAT
Add to Cart

Starter kit for the Ajax security system HUB2KIT1MP-WHITE

SKU: HUB2KIT1MP-WHITE
£303.90EX VAT
Add to Cart

Small wireless detector GlassProtect-WHITE

SKU: GLASSPROTECT-White

Grade 2 Security Cetification EN50131


 

Small wireless detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage.

Operates up to 7 years without battery replacement

Ignores thunder, dogs barking and noise outside the window

Detects breakage at a distance of up to 9 m

Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.

 

Principle of operation

Detects broken glass using an electret microphone, which registers the sound of impact against the glass and of the glass falling.

Features

Two-factor detection of broken glass prevents false alarms caused by thunder, dogs barking and noise from passing trucks.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
 

Small wireless detector GlassProtect-BLACK

SKU: GLASSPROTECT-Black

Grade 2 Security Cetification EN50131


 

Small wireless detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage.

 

Operates up to 7 years without battery replacement

Ignores thunder, dogs barking and noise outside the window

Detects breakage at a distance of up to 9 m 

Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.

Principle of operation

Detects broken glass using an electret microphone, which registers the sound of impact against the glass and of the glass falling.

Features

Two-factor detection of broken glass prevents false alarms caused by thunder, dogs barking and noise from passing trucks.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
 

Wireless opening detector DoorProtect-WHITE

SKU: DoorProtect-White

Grade 2 Security Cetification EN50131


 

Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base.

Operates up to 7 years without battery replacement

External contact is available for connecting third-party detectors

Shock & tilt sensor

Includes magnets of various sizes for installation on narrow frames and door frames

Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.

 

Principle of operation

The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.

Features

The device consists of two modules — detector and magnet. The set includes two magnets: the big magnet is installed at a distance of up to 2 cm, and the small magnet up to 1 cm.
 

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
£38.90EX VAT
Add to Cart

Wireless opening detector DoorProtect-BLACK

SKU: DoorProtect-Black

Grade 2 Security Cetification EN50131


 

Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base.

Operates up to 7 years without battery replacement

External contact is available for connecting third-party detectors

Shock & tilt sensor

Includes magnets of various sizes for installation on narrow frames and door frames

Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.

 

Principle of operation

The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.

Features

The device consists of two modules — detector and magnet. The set includes two magnets: the big magnet is installed at a distance of up to 2 cm, and the small magnet up to 1 cm.
 

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
£38.90EX VAT
Add to Cart

Ajax Smart Light Switch, 1 Gang LIGHTCORE-1-GANG

SKU: LIGHTCORE-1-GANG
  • 8 colours
  • No need for neutral wire
  • Remote control and configuring via the Ajax apps
  • Contactless control with large touch button
  • 4 Frames for installing up to 4 switches
  • Controlling the lamps of 5 to 600 W
  • Pairing with the system via QR code
£39.90EX VAT
Add to Cart

Faceplate for branding StreetSiren DoubleDeck, x10 SSDDBRANDPLATES-BLACK-X10

SKU: SSDDBRANDPLATES-BLACK-X10


 

Faceplate for branding StreetSiren DoubleDeck

Free promotion of security services

Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbors and visitors.

How to order Brandplates

Brandplate are sold in batches — separately from StreetSiren DoubleDeck. One batch is 10 pcs.

Free printing

Order 4 batches of Brandplates (40 pcs) or more in a single color to get free printing. Your design may include logo, company name and contact information: website or phone number.

Click below link to add your artwork

Brandplate Constructor | Ajax Systems

Secure mounting

Brandplate mounts on StreetSiren DoubleDeck using a clip lock. To make it extremely tight, we provided a possibility to use a screw. Even a strong wind won’t tear Brandplate off the siren.

£52.90EX VAT
Add to Cart

Faceplate for branding StreetSiren DoubleDeck, x10 SSDDBRANDPLATES-WHITE-X10

SKU: SSDDBRANDPLATES-WHITE-X10


 

Faceplate for branding StreetSiren DoubleDeck

 

 

Free promotion of security services

Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbors and visitors.

How to order Brandplates

Brandplate are sold in batches — separately from StreetSiren DoubleDeck. One batch is 10 pcs.

Free printing

Order 4 batches of Brandplates (40 pcs) or more in a single color to get free printing. Your design may include logo, company name and contact information: website or phone number.

Click below link to add your artwork

Brandplate Constructor | Ajax Systems

Secure mounting

Brandplate mounts on StreetSiren DoubleDeck using a clip lock. To make it extremely tight, we provided a possibility to use a screw. Even a strong wind won’t tear Brandplate off the siren. 

£52.90EX VAT
Add to Cart