Gunmetal
Knightsbridge Flat Plate 13A switched fused spur unit – gunmetal FP6300GM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– Switched
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge 45A DP Switch and 13A switched socket with neons – gunmetal with black insert FPR83MNGM
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model combines a 45A switch with a 13A socket.
– 45A
– Double pole
– With neon indicators
– 13A switched socket
– Minimum mounting box depth: 47mm
Knightsbridge 45A 2G DP Switch with neon – gunmetal FP82MNGM
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient.
– 45A
– Double pole
– With neon indicator
– Ultra low profile design with built in gasket
– Minimum mounting box depth: 47mm
Knightsbridge 45A 1G DP Switch with neon – gunmetal FP81MNGM
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient.
– 45A
– Double pole
– With neon indicator
– Ultra low profile design with built in gasket
– Minimum mounting box depth: 47mm
Knightsbridge Flat Plate 2G blanking plate – gunmetal FP8360GM
Used to neatly cover unused or redundant boxes. Flat Plate low profile design.
– Ultra low profile design with built in gasket
– Certified to IEC 60670-1
Knightsbridge Flat Plate RJ45 network outlet – gunmetal FPRJ45GM
Ideal for creating wired networking points around the home. Flat Plate low profile design
– Single shuttered UTP CAT5e RJ45 port
– IDC terminals (tool included)
– Write on designation label
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 35mm
Knightsbridge Flat Plate Telephone extension socket – gunmetal FP7400GM
Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design
– Extension BT type socket
– Screw terminals
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Flat Plate 45A 1G DP switch with neon – gunmetal FP8331NGM
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. Flat Plate low profile design.
– 45A
– Double pole
– With neon indicator
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth: 47mm
Knightsbridge Flat Plate 4G modular faceplate – gunmetal FP4GGM
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 20A 1G DP switch – gunmetal FP8341GM
Ideal for fixed appliances such as water heaters, Flat Plate low profile metal design with matching rocker
– 20A rated
– Double pole
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 13A fused spur unit – gunmetal FP6000GM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 1G blanking plate – gunmetal FP8350GM
Used to neatly cover unused or redundant boxes. Flat Plate low profile design.
– Ultra low profile design with built in gasket
– Certified to IEC 60670-1
Knightsbridge Flat Plate Telephone master socket – gunmetal FP7300GM
The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design
– Master BT type socket
– Screw terminals
– Ultralow profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Flat Plate 5A unswitched socket – gunmetal with black insert FP5AGM
Ideal for use in custom lighting solutions, Flat Plate low profile metal design.
– 5A round pin socket
– Unswitched
– Ultra low profile design with built in gasket
– Certified to BS 546
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 4G 2 Way Dimmer 60-400W – Gunmetal FP2164GM
4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 15 year guarantee. Check with lamp manufacturer for compatibility.
Knightsbridge Flat Plate Screened Diplex Outlet (TV & FM DAB) – Gunmetal FP0160GM
Ideal for TV, FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design
– 1 x Coaxial TV outlet (female)
– 1 x Coaxial FM/DAB outlet (male)
– Screened
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 35mm
Knightsbridge Flat Plate 13A switched fused spur unit with neon – gunmetal FP6300NGM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– Switched
– With neon indicator
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 13A switched fused spur unit with neon and flex outlet – gunmetal FP6300FGM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– Switched
– With neon indicator and flex outlet
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 20A 1G DP switch with neon – gunmetal FP8341NGM
Ideal for fixed appliances such as water heaters, Flat Plate low profile metal design with matching rocker
– 20A rated
– Double pole
– Switched
– With neon indicator
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 20A 1G DP switch with neon & flex outlet – gunmetal FP8341FGM
Ideal for fixed appliances such as water heaters, Flat Plate low profile metal design with matching rocker
– 20A rated
– Double pole
– Switched
– With neon indicator and flex outlet
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth 25mm
Best sellers...
