Gunmetal
Knightsbridge Flat Plate 13A switched fused spur unit – gunmetal FP6300GM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– Switched
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge 45A DP Switch and 13A switched socket with neons – gunmetal with black insert FPR83MNGM
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model combines a 45A switch with a 13A socket.
– 45A
– Double pole
– With neon indicators
– 13A switched socket
– Minimum mounting box depth: 47mm
Knightsbridge 45A 2G DP Switch with neon – gunmetal FP82MNGM
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient.
– 45A
– Double pole
– With neon indicator
– Ultra low profile design with built in gasket
– Minimum mounting box depth: 47mm
Knightsbridge 45A 1G DP Switch with neon – gunmetal FP81MNGM
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient.
– 45A
– Double pole
– With neon indicator
– Ultra low profile design with built in gasket
– Minimum mounting box depth: 47mm
Knightsbridge Flat Plate 2G blanking plate – gunmetal FP8360GM
Used to neatly cover unused or redundant boxes. Flat Plate low profile design.
– Ultra low profile design with built in gasket
– Certified to IEC 60670-1
Knightsbridge Flat Plate RJ45 network outlet – gunmetal FPRJ45GM
Ideal for creating wired networking points around the home. Flat Plate low profile design
– Single shuttered UTP CAT5e RJ45 port
– IDC terminals (tool included)
– Write on designation label
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 35mm
Knightsbridge Flat Plate Telephone extension socket – gunmetal FP7400GM
Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flat Plate low profile design
– Extension BT type socket
– Screw terminals
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Flat Plate 45A 1G DP switch with neon – gunmetal FP8331NGM
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. Flat Plate low profile design.
– 45A
– Double pole
– With neon indicator
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth: 47mm
Knightsbridge Flat Plate 4G modular faceplate – gunmetal FP4GGM
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 20A 1G DP switch – gunmetal FP8341GM
Ideal for fixed appliances such as water heaters, Flat Plate low profile metal design with matching rocker
– 20A rated
– Double pole
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 13A fused spur unit – gunmetal FP6000GM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 1G blanking plate – gunmetal FP8350GM
Used to neatly cover unused or redundant boxes. Flat Plate low profile design.
– Ultra low profile design with built in gasket
– Certified to IEC 60670-1
Knightsbridge Flat Plate Telephone master socket – gunmetal FP7300GM
The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flat Plate low profile design
– Master BT type socket
– Screw terminals
– Ultralow profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Flat Plate 5A unswitched socket – gunmetal with black insert FP5AGM
Ideal for use in custom lighting solutions, Flat Plate low profile metal design.
– 5A round pin socket
– Unswitched
– Ultra low profile design with built in gasket
– Certified to BS 546
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 4G 2 Way Dimmer 60-400W – Gunmetal FP2164GM
4G 2 way leading edge dimmer with a 4 x 60-400W rating. With push on/ push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. For low voltage lighting add up the rating of the transformers you wish to dim for compatibility. Made from high quality ultra slim, premium grade material, complete with integral gasket for moisture protection. Minimum mounting depth: 25mm. Dimensions: 148.5mm x 87.5mm Supplied in retail blister with full fitting instructions. Compliant to BS EN 60669-1, BS EN 60669-2. 15 year guarantee. Check with lamp manufacturer for compatibility.
Knightsbridge Flat Plate Screened Diplex Outlet (TV & FM DAB) – Gunmetal FP0160GM
Ideal for TV, FM/DAB coaxial connections. Screened diplexer enables the signal from one cable to be used for both Digital TV reception and FM DAB reception. Flat Plate low profile design
– 1 x Coaxial TV outlet (female)
– 1 x Coaxial FM/DAB outlet (male)
– Screened
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 35mm
Knightsbridge Flat Plate 13A switched fused spur unit with neon – gunmetal FP6300NGM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– Switched
– With neon indicator
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 13A switched fused spur unit with neon and flex outlet – gunmetal FP6300FGM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– Switched
– With neon indicator and flex outlet
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 20A 1G DP switch with neon – gunmetal FP8341NGM
Ideal for fixed appliances such as water heaters, Flat Plate low profile metal design with matching rocker
– 20A rated
– Double pole
– Switched
– With neon indicator
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 20A 1G DP switch with neon & flex outlet – gunmetal FP8341FGM
Ideal for fixed appliances such as water heaters, Flat Plate low profile metal design with matching rocker
– 20A rated
– Double pole
– Switched
– With neon indicator and flex outlet
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate TV and SAT TV Outlet (isolated) – Gunmetal FP0140GM
Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flat Plate low profile design
– 1 x Coaxial TV outlet
– 1 x F-Type SAT TV Outlet
– Isolated
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Flat Plate 13A fused spur unit with neon – gunmetal FP6000NGM
Fused spur solution in Flat Plate low profile metal design with matching fuse holder.
– 13A rated
– With neon indicator
– Ultra low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 1G SAT TV Outlet (non-isolated) – Gunmetal FP0150GM
Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Flat Plate low profile design
– 1 x F-Type SAT TV Outlet
– Non-isolated
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Flat Plate 2G modular faceplate – gunmetal FP2GGM
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 1G Modular Faceplate – Gunmetal FP1GGM
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts a single 25 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 1G TV Outlet (non-isolated) – Gunmetal FP0100GM
Ideal for standard TV/Coax connections (non-isolated). Flat Plate low profile design
– Coaxial TV outlet
– Non-isolated
– Ultra low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Flat plate 13A 1G switched socket with dual USB charger (2.4A) – gunmetal with black insert FPR9124GM
Flat plate 13A 1G switched socket with dual USB charger (2.4A) – gunmetal with black insert
Knightsbridge Flat Plate 115/230V dual voltage shaver socket – gunmetal with black insert FP8900GM
Perfect upgrade to any bathroom, dual voltage shaver socket, Flat Plate low profile metal design.
– 115/230VAC 20VA
– IP41
– Dual Voltage Shaver Socket
– Ultra low profile design with built in gasket
– Certified to EN 61558
– Minimum mounting box depth: 47mm
Knightsbridge Flat Plate 10AX 4G 2-way toggle switch – gunmetal FP4TOGGM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat Plate 10AX 6G 2-way switch – gunmetal FP4200GM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat Plate 10AX 4G 2-way switch – gunmetal FP4100GM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat Plate 10AX 3G 2-way toggle switch – gunmetal FP3TOGGM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat Plate 10AX 2G 2-way toggle switch – gunmetal FP2TOGGM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat plate 10AX 3G 2-way switch – gunmetal FP4000GM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat plate 13A 2G DP switched socket – gunmetal with black insert FPR9000GM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rockers, unique socket insert design that is completely hidden once a plug is inserted.
– 13A 2G Switched Socket
– Double Pole Switches
– Fitted with twin earth terminals
– Flat Plate low profile design with built in gasket
– Certified to BS 1363:2
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 10AX 1G Intermediate Toggle Switch – Gunmetal FP12TOGGM
An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal toggle.
– 10AX rated
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat Plate 10AX 3 Pole Fan Isolator Switch – Gunmetal FP1100GM
Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flat Plate low profile metal design with matching metal rocker.
– 10AX rated
– Triple Pole
– Ultra low profile design with built in gasket
– Rated conditional short circuit current (Inc) 1500A
– Certified to EN 60669-1, EN 60669-2-4
– Minimum mounting box 16mm
Knightsbridge Flat Plate 10AX 1G 2 Way Toggle Switch – Gunmetal FP1TOGGM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal toggle. 10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat Plate 10AX 1G Intermediate Switch – Gunmetal FP1200GM
An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flat Plate low profile metal design with matching metal rocker.
– 10AX rated
– Ultra low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat Plate 10AX 2G 2-way switch – gunmetal FP3000GM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Flat plate 13A 1G DP switched socket – gunmetal with black insert FPR7000GM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker, unique socket insert design that is completely hidden once a plug is inserted.
– 13A 1G Switched Socket
– Double Pole Switch
– Flat Plate low profile design with built in gasket
– Certified to BS 1363:2
– Minimum mounting box depth 25mm
Knightsbridge Flat Plate 10AX 1G 2 Way Switch – Gunmetal FP2000GM
Perfect finishing touch to any modern home, ultra-low profile Flat Plate metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Ultra-low profile Flat Plate design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Best sellers...
