Call Points
SYC Protective cover for fire call points BF370SC
C-Tec BF370SC Protective Cover for Sycall Fire Call Points
The BF370SC is a protective cover for Sycall Fire Call Points.
CA Universal Manual call point RED CA470
- A high-quality red manual call point for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54 Parts 11 & 17 and Kiwa Telefication certified to EN54-13.
- Surface or flush mountable.
- Onboard short-circuit loop isolator.
- Smooth-action resettable element mimics the feel of breaking glass.
- Supplied with reset/back box removal key and ‘Not in Use’ label.
- Red LED ‘alarm ring’ illuminates call point face upon activation.
- Photoluminescent operating window remains visible for up to 5 minutes.
- 5mA typical alarm current (370µA typical quiescent @ 22-40V DC.
- IP42 rated (IP67 rated version also available, order code CA47067)
- Yellow, green, blue and white versions also available.
Single pole emergency door release EDR-1N
- All one colour
- Easy clean surface (ideal for hospitality areas)
- Easy cable entry from sides or rear
- Screw footprint for surface fitting onto standard back box
- Key reset operation (not replacement glass)
- Internal use
- Emergency Door Release – Permanently lit
- Changes to red on activation/alarm
ESP Spare Call Point Key for MAGDUO MAGDUOCPK
- Spare Call Point Key for MAGDUO (Pack of 5)
- Suitable for MAGDUOCP & MAGDUOCPIP65
Hochiki HO4581R Hochiki-HCP-WSCI
Model HCP-W(SCI) is a weatherproof Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol.
The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing* for communications polling and is continuously lit when the HCP-W(SCI) is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.
The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.
*Fire alarm control panel compatibility is required for this feature.
Hochiki HCP-ESCI Hochiki-HCP-ESCI
Model HCP-E(SCI) is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing* for communications polling and is continuously lit when the HCP-E(SCI) is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.
The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.
The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required (sold separately). An optional glass element is also available.
*Fire alarm control panel compatibility is required for this feature.
Fike 402-0006 Twinflex Callpoint with cover Fike-402-0006-Twinflex-Callpoint-with-cover
The Twinflex Manual Call Point (MCP) allows for user activation of the fire alarm system. Once operated the device latches into the alarm position and requires manually resetting via a special key.
This device is compatible with the range of Twinflex Fire Alarm Control Panels and comprises a 2-wire zone-powered Manual Call Point (MCP). This device may be installed on the same zone as the Twinflex Multipoint detector/sounder and other associated Twinflex devices.
Re-settable element
LED indication for end of line
Includes reset key and protective cover
Can be surface/flush mounted
Apollo SA5900-908APO Apollo-SA5900-908APO
- EN 54-11 & EN 54-17 Certified
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
- Built-in Isolator
Apollo 58200-951APO Apollo-58200-951APO
- Suitable for weatherproof applications
- EN 54-11 & EN 54-17 Certified
- Resettable operating element
- 170° viewable LED
- XP95 & Discovery compatible
Apollo 55400-894APO Apollo-55400-894APO
- Resettable operating element
- Easy access, front reset mechanism
- EN 54-11 Certified MCP
- 170° viewable LED
- Suitable for semi-flush or surface mounting
Hinged Clear Cover CI-NTN
Reset Call Point (IP24) c/w Back Box and Wall Plate EV-MCP2-IP24
- STI “Reset” IP24 Housing
- IP24 Rated
- DIL Switched Addressed
- Includes Backbox and RF Wall Plate
- Replaces EV-MCP Reset Call Points
Triple pole emergency door release EDR-3N
- All one colour
- Easy clean surface (ideal for hospitality areas)
- Easy cable entry from sides or rear
- Screw footprint for surface fitting onto standard back box
- Key reset operation (not replacement glass)
- Internal use
- Emergency Door Release – Permanently lit
- Changes to red on activation/alarm
ESP Resettable Surface Call Point Ip65 MAGDUOCPIP65
- IP65 Ingress protection
- Resettable manual call point
- Built-in End of Line function
- Device base included
ESP Resettable Surface Call Point MAGDUOCP
- Resettable manual call point
- Built-in End of Line function
- Device base included
ESP Surface Mounting Red Call Point SCP2R
- Surface or flush mounting
- Complete with surface back box
- Spare cover available – SCP2R-CVR
ESP Addressable Surface Red Call Point IP67 MAGPRO-CPIP67
- Resettable call point
- Certified to EN54-11-A
- Built in isolator
- IP67 Rated
Best sellers...
