Results per page 20 All

Photoelectric Optical Detector c/w In-Built Sounder (EV-PS Replacement) EV-PYS

SKU: EV-PYS
The EV-PYS sensor drives and controls the EV-PYSVAD VAD Beacon Base, with the entire platform only taking one address for maximum system efficiency. This clever design makes for quick and simple installation, saving both time and money, whilst remaining extremely competitively priced. It also makes for a more aesthetically pleasing appearance, with a lower profile for an unobtrusive appearance.
 
Key Features
 
> Optical Detector with built in Sounder
> Sounder output ~ 88dB(A) @ ~ 3.5mA
> Omniview 360° LED
> Drive Output for dedicated EV-PYSVAD beacon base
> Evolution FSK protocol
> EEPROM Addressed (Programmer)
> Approved to EN54-3:2001 + A1:2002 + A2:2006 & EN54-7:2000 + A1:2002 + A2:2006

 

 

£48.90EX VAT
Add to Cart

Multisensor Photoelectric Optical & A1R Heat Multi-Sensor EV-PH

SKU: EV-PH
The EV-PH is a combined Optical Smoke and Heat Detector in one unit. This advanced Multi Sensor is able to combine the benefits of both optical and heat sensing technologies making it less prone to false alarms than individual sensing devices.
 
An innovative Nittan designed algorithm reads both signals simultaneously and generates alarm signals from either (or both) sensor(s).
 
 
Key Features
 
> Optical Smoke and 54°C (A1R) Heat Sensors in one housing
> Omniview 360° LED
> Nittan Evolution FSK protocol
> EEPROM Addressed (Programmer)
> RIL and Base Control Outputs
> EN54-5 & EN54-7 Compliant

 

£31.90EX VAT
Add to Cart

Photoelectric Optical Detector EV-P

SKU: EV-P
  • Photoelectric detector
  • Using Nittan Evolution FSK Protocol
  • EEPROM addressed
  • Low profile
  • Operational voltage range from 20V to 35V
  • Low monitoring current
  • Omniview 360° LED (fire alarm indicator)
  • Remote indicator output
  • Base Control auxiliary output
  • Non-polarised terminal
  • Standard EN54-7:2000 + A1:2002
£26.90EX VAT
Add to Cart

Hikvision AX PRO Series Wireless External Magnet Detector DS-PDMCX-E-WE

SKU: DS-PDMCX-E-WE
  • IP66 protective level, UV stable
  • Fully remote configurable through App
  • Multiple enrollment methods and easy installation design
  • Frequency hopping against jamming for reliable transmission

Hikvision Face Recognition Terminal DS-K1T680D-E1

SKU: DS-K1T680D-E1
  • 8-inch touch screen with bezel-less design
  • Presents card on the screen to authenticate
  • Face recognition distance: 0.3 m to 3 m, duration < 0.2 s/User, accuracy rate ≥ 99%
  • 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), and 150,000 event capacity
  • Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, and PoE
  • Two-way audio with indoor station and master station
  • Configuration via the web client and mobile client
  • Customizes attendance status name

Hikvision Face Recognition Terminal DS-K1T671M

SKU: DS-K1T671M
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in Mifare card reading module
  • Face recognition distance (without face mask): 0.3 m to 3 m, Duration < 0.2 s/User, Accuracy rate ≥ 99%
  • Max.6000 faces, Max.6000 cards
  • Two-way audio with client software, indoor station, and mainstation
  • Supports TCP/IP
  • Configuration via the web client
  • Supports ISAPI and ISUP5.0 protocol
  • IP65

Wireless opening detector DoorProtect-WHITE

SKU: DoorProtect-White

Grade 2 Security Cetification EN50131


 

Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base.

Operates up to 7 years without battery replacement

External contact is available for connecting third-party detectors

Shock & tilt sensor

Includes magnets of various sizes for installation on narrow frames and door frames

Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.

 

Principle of operation

The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.

Features

The device consists of two modules — detector and magnet. The set includes two magnets: the big magnet is installed at a distance of up to 2 cm, and the small magnet up to 1 cm.
 

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
£38.90EX VAT
Add to Cart

Wireless opening detector DoorProtect-BLACK

SKU: DoorProtect-Black

Grade 2 Security Cetification EN50131


 

Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base.

Operates up to 7 years without battery replacement

External contact is available for connecting third-party detectors

Shock & tilt sensor

Includes magnets of various sizes for installation on narrow frames and door frames

Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.

 

Principle of operation

The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.

Features

The device consists of two modules — detector and magnet. The set includes two magnets: the big magnet is installed at a distance of up to 2 cm, and the small magnet up to 1 cm.
 

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
£38.90EX VAT
Add to Cart

Wireless Carbon Monoxide Detector CO-WE2

SKU: CO-WE2
  • Two-way wireless CO sensor
  • Detects harmful odourless carbon monoxide (CO)
  • Loud and obvious alarm
  • Low-battery supervision
  • Signal Strength Indicator
  • Pyronix High Security Wireless Encryption Protocol
  • No wires, no mess
  • One-Push-To-Learn Button
£70.90EX VAT
Add to Cart

C4 EN54-5 A1R heat detector C4403A1R

SKU: C4403A1R
  • LPCB certified to EN54-3 (Sounders) and EN54-23 (VADs)
  • Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD
  • Impressive 100dB(A) sound output @ 1m
  • 31 selectable primary and secondary tone pairs and two volume levels (high and low)
  • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
  • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
  • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
  • IP33C rated
  • Manufactured in the UK by C-TEC
£10.90EX VAT
Add to Cart

Up to 60m Motion Detector D-TECT-60-GJD320

SKU: D-TECT-60-GJD320
  • Detection area of up to 60m
  • Adjustable pan and tilt
  • A conduit cable adaptor is available
  • Engineer friendly features to ease cable termination, set-up and
    servicing
  • Covert sensor module
£187.90EX VAT
Add to Cart

Wired Shock Detector SHOCK/W

SKU: SHOCK/W
  • Sleek and stylish design

  • Piezo electric sensor detection

  • Adjustable sensitivity

  • Latch functionality included

  • Reverse polarity protection

  • 5 years warranty

£8.90EX VAT
Add to Cart

CA Optical Smoke Detector CA430A/DR

SKU: CA430A/DR

C-TEC CA430A/DR HI-OUTPUT ADDRESSABLE WALL SOUNDER

The C-Tec CA430A/DR is a red wall mounted high output addressable wall sounder with IP33C deep base designed for use on C-Tec CAST protocol analogue addressable fire alarm systems.

Features

LPCB certified to EN54-3 & 17 and Kiwa Telefication certified to EN54-13.
Impressive 100dB(A) sound output @ 1m.
Onboard short-circuit loop isolator.
6.5mA typical alarm current (460µA typical quiescent current) @24-40V DC (Sounder on max).
Group addressing facility allows multiple devices to be operated simultaneously.
4 selectable volume levels and 31 selectable tones.
IP33C (Type B) rated.

£27.90EX VAT
Add to Cart

C4 EN54-7 Optical detector C4416

SKU: C4416
  • A high-quality optical smoke detector offering outstanding detection performance at a very competitive price
  • Manufactured by C-TEC in the UK
  • Third-party certified to EN54-7 by Intertek
  • Carries the pan-European ‘CertAlarm’ mark
  • Wide 6-33V DC operating voltage
  • Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
  • Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels
  • Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
  • Class A1 fixed heat, class B fixed heat, class A1R rate-of-rise and multi-sensor variants also available
  • Excellent discounts for quantity orders
£11.90EX VAT
Add to Cart

C4 EN54-29 Multi-sensor C4414

SKU: C4414
  • A high-quality combined optical + heat multi-sensor offering outstanding detection performance at a very competitive price
  • Manufactured by C-TEC in the UK
  • Third-party certified to EN54-5 & 7 by Intertek
  • Carries the pan-European ‘CertAlarm’ mark
  • Wide 6-33V DC operating voltage
  • Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
  • Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels
  • Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
  • Class A1 fixed heat, class B fixed heat, class A1R rate-of-rise and optical variants also available
  • Excellent discounts for quantity orders
£13.90EX VAT
Add to Cart

CX C Class Base sounder VAD WHITE BF456A/CX/W

SKU: BF456A/CX/W
  • Third-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by the LPCB
  • Provides ‘C-3-8’ light distribution (min 0.4 lux over a 3 x 8m cylindrical area)
  • Supplied with a BF431QCP quick connect plate and detector spur wires
  • Impressive 96dB(A) sound output @ 1m
  • Onboard short-circuit loop isolator
  • 550µA quiescent current
  • 14mA alarm current @24V DC (VAD lit, sounder on max)
  • Group addressing facility allows multiple devices to be operated simultaneously
  • 7 selectable volume levels and up to 15 selectable tone pairs
  • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
  • IP21C rated
£46.90EX VAT
Add to Cart

CX COMP ceiling sounder VAD WHITE BF451A/CX/SW

SKU: BF451A/CX/SW
  • Third-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by Intertek (pending)
  • Provides ‘C-3-8 light distribution when ceiling mounted (min 0.4 lux over a 3 x 8m cylindrical area)
  • Can also provide ‘W-2.4-3.5’ light distribution when wall mounted (min. 0.4 lux over a 2.4 x 3.5m cuboid area)
  • Impressive 90dB(A) sound output @ 1m
  • Unique C-TEC designed lens maximises light output whilst minimising current draw
  • Onboard short-circuit loop isolator
  • 550uA quiescent current
  • 14mA alarm current @24V DC (VAD lit, sounder on max)
  • Attractively finished in white polycarbonate (light output is white)
  • Group addressing facility allows multiple devices to be operated simultaneously
  • 7 selectable volume levels and up to 15 selectable tone pairs
  • Attractive compact design – just 102mm diameter, 63mm deep
  • Includes an integrated sounder to base locking mechanism
  • IP21C rated
  • Low current consumption means multiple devices can be connected to the loop
  • DIP switch addressed
  • Simple ‘click and twist’ design and easy-fit base ensures rapid installation time
  • Also available in a red plastic housing (order code BF451A/CX/SR)
£45.90EX VAT
Add to Cart

CX COMP ceiling sounder WHITE BF450A/CX/SW

SKU: BF450A/CX/SW
  • Third-party certified to EN54-3 (Sounders) and EN54-17 (Isolators) by Intertek (pending)
  • Impressive 90dB(A) sound output @ 1m
  • Onboard short-circuit loop isolator
  • 5mA alarm current @24V DC (sounder on max)
  • Attractively finished in white polycarbonate
  • Group addressing facility allows multiple devices to be operated simultaneously
  • 7 selectable volume levels and up to 15 selectable tone pairs
  • Attractive compact design – just 102mm diameter, 63mm deep
  • Includes an integrated sounder to base locking mechanism
  • IP21C rated
  • Low current consumption means multiple devices can be connected to the loop
  • DIP switch addressed
  • Simple ‘click and twist’ design and easy-fit base ensures rapid installation time
  • Also available in a red plastic housing (order code BF450A/CX/SR)
£33.90EX VAT
Add to Cart

CX Base sounder WHITE BF431A/CX/W

SKU: BF431A/CX/W
  • Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB.
  • Impressive 96dB(A) sound output @ 1m.
  • Supplied with a BF431QCP quick connect plate and detector spur wires.
  • Onboard short-circuit loop isolator.
  • 550µA quiescent current.
  • 5mA alarm current @24V DC (Sounder on max).
  • Group addressing facility allows multiple devices to be operated simultaneously.
  • 7 selectable volume levels and up to 15 selectable tone pairs.
  • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
  • IP21C rated.
£27.90EX VAT
Add to Cart

Pyronix Intruder Two-Way Wireless Asset Sensor ASSET-WE

SKU: ASSET-WE
  • Two sensitivity settings

  • Home Position allows for any orientation or angle

  • Easy relocation of Home Position

  • Notification via HomeControl2.0

  • Signal strength and battery test

  • Two-way wireless

  • Dual frequency

  • One-push-to-learn

  • Compatible with any Enforcer or wireless ZEM with HUB version 3.54 or later

  • Grade 2 compliant

£43.90EX VAT
Add to Cart