Detectors
Hochiki ALN-ENALG-ENWHT Hochiki-ALN-ENALG-ENWHT
The ALN-EN incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications.
This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.
Control Panel compatibility required.
Hochiki DFG-60BLKJ Hochiki-DFG-60BLKJ
- Waterproof design rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No Mounting base required
- Minimal standby current
- Approved by LPCB & VdS
Hochiki ATJ-EN Hochiki-ATJ-EN
The ATJ-EN incorporates a variable temperature heat element and a rate of rise heat element, both of which are controlled from the Control Panel, allowing either thermal element or both elements simultaneously to be active in making the fire decision.
The sensor polling LEDs can also be controlled via the Control Panel (pulsing/non-pulsing)*.
*Control Panel compatibility required
Hochiki ACC-EN Hochiki-ACC-EN
The ACC-EN has 3 modes, which are controlled from the Control Panel*, allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel (pulsing/non-pulsing). The ACC-E smoke chamber can esily be removed or replaced for easy maintentance
*control panel compatibility required
Hochiki ACB-EW Hochiki-ACB-EW
Model ACB-EW is a Waterproof Multi-Heat Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.
The ACB-EW incorporates a variable Fixed Temperature heat element and a Rate Of Rise heat element, both of which are controlled from the Control Panel, allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LED’s can also be controlled via the Control Panel (pulsing/non-pulsing)*.
Rated to IP67, the ACB-EW can be used externally and is supplied with its own fixing base which is used to fix the sensor. Flying leads from the sensor connect directly to the loop via waterproof connectors.
*control panel compatibility required
Fike 204-0012 Twinflex ASD Detector with sounder & strobe Fike-204-0012-Twinflex-ASD-Detector-with-sounder-and-strobe
2 Wire Multipoint ASD detector with Sounder / Strobe can be set to any one of 3 Smoke modes, 3 Heat modes as well as a Combined Mode (Smoke 2 and Heat 2) where a smoke or heat source can trigger a fire decision.
Twinflex Multipoint ASD Detector with Sounder and StrobeÂ
Smoke, Heat Alarm, Sounder or Combined Mode
Self-calibrates every 6 hours
Continuously monitors for dust contamination
Easily removable for maintenance at height
Multipoint Detectors for use with Twinflex Pro2 Alarm Panel
Fike 204-0003 Twinflex ASD Detector no sounder Fike-204-0003-Twinflex-ASD-Detector-no-sounder
2 Wire Multipoint ASD detector with Sounder can be set to any one of 3 Smoke modes, 3 Heat modes as well as a Combined Mode (Smoke 2 and Heat 2) where a smoke or heat source can trigger a fire decision
Twinflex Multipoint ASD Detector without Sounder
Smoke, Heat Alarm or Combined Mode
Self-calibrates every 6 hours
Continuously monitors for dust contamination
Easily removable for maintenance at height
Multipoint Detectors for use with Twinflex Pro2 Alarm PanelÂ
Fike 204-0001 Twinflex ASD Detector with sounder Fike-204-0001-Twinflex-ASD-Detector-with-sounder
Twinflex Multipoint ASD Detector with Sounder
Smoke, Heat Alarm, Sounder or Combined Mode
Self-calibrates every 6 hours
Continuously monitors for dust contamination
Easily removable for maintenance at height
Multipoint Detectors for use with Twinflex Pro2 Alarm PanelÂ
Apollo 58000-700APO Apollo-58000-700APO
- Reliable fire detection in areas with a very wide temperature range from -40°C to +70°C
- Five operating modes for customised fire detection and enhanced false alarm management
- Drift compensation to ensure constant sensitivity
- A great alternative to Ionisation detectors
Apollo 58000-600APO Apollo-58000-600APO
- Reliable fire detection in areas with a very wide temperature range from -40°C to +70°C
- Five operating modes suitable for a range of applications where unique response behaviour is required
- Drift compensation to ensure constant sensitivity
- Ideal for accommodation decks, passages and escape routes
Apollo 55000-885APO Apollo-55000-885APO
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Well suited to environments such as hotel bedrooms, warehouses and loading docks
- Unaffected by wind and atmospheric pressure
- Alternative to Ionisation detectors
Best sellers...
Metro Prepaid Single Phase Meter with Tamper Keypad MET004 METROSINGLEPHASE
