Downlights
Knightsbridge IP65 GU10 Recessed Downlight – Chrome RDSHC
230V IP65 GU10 Recessed Downlight. Die-cast aluminium, finished in chrome. Complete with GU10 230V- 35W max. (lamp not included), Designed for use in wet areas like bathrooms and shower rooms.
Knightsbridge IP20 12V 50W max. L/V Brass Downlight with Bridge L02B1
GU5.3 12V 50W max lampholder, Brass.
MR16 12V 50W lamp (not supplied with fitting). Cable termination via 10 Amp connector block within secure enclosure, supplied with cord grip and bridge. Dimmable with electronic transformer (not supplied with fitting – see Transformer & Drivers section).130mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 15mm.
Knightsbridge 230V IP44 9W LED Dimmable Downlight – CCT RDL9CCT
230V IP44 9W LED dimmable downlight, CCT change via switch on the back of fitting. Polycarbonate body and diffuser.
– CCT Adjustable
– High efficiency SMD LED chips
– Built-in trailing edge dimmable LED driver
– Pre-wired with 300mm flex
– Integrated design, easy installation
3000K 800lm/ 4200K 880lm/ 5700K 850lm
Suitable LED replacement for halogen and CFL downlights.
For commercial and domestic use
Please check dimmer compatibility before installation.
Knightsbridge Bezel for CFR Downlight – Brass CFRB
Bezel, compatible with CFR IP65 Downlights
Knightsbridge IP20 230V 60W max. R63 Brass Mains Downlight MD02B
IP20 60W Mains Downlight, Brass.
ES/E27 230V 60W max lampholder. R63 60W lamp (not supplied with fitting). Double insulated fitting. Cable termination via 2-core 0.75mm² H05SS-F flex. Dimmable. 150mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 18mm. No transformer required.
Knightsbridge FireKnight/ProKnight/ValKnight Hole Converter (up to 130mm) White VFRCW
Hole converter for the VFR fixed range of LED fire-rated downlights.The converter allows the down-light to be used for cutouts between 65mm-130mm (lamps not included).
Compatible with VFRCOB / VFR8 / VFRIC8
Knightsbridge IP20 12V 50W max. L/V Matt Black Downlight with Bridge L02BK1
GU5.3 12V 50W max lampholder, Matt Black.
MR16 12V 50W lamp (not supplied with fitting). Cable termination via 10 Amp connector block within secure enclosure supplied with cord grip and bridge. Dimmable with electronic transformer (not supplied with fitting – see Transformer & Drivers section). 130mm recommended ceiling void required. Spring clip fixings with a recommended maximum ceiling thickness of 15mm.
ESP EM Downlight Corridor 5W IP20 Non-Main EM5WNMCDLK
- 5500K Colour Temperature
- High Power 5W LED
- Aluminium bezel
- Recessed Mounted
- Emergency light output – 214 Lumen output
- Charge and Discharge Protection
- Green LED indicator
- 3 Hours Emergency Duration
- 4.8V 3500mAh Ni-Cd Battery
- IP20 Rating
- BS EN 60598-2-22
- Weight- 0.9Kg
Knightsbridge 230V IP65 Fixed GU10 Fire-Rated Downlight – White VFCFIPW
230V IP65 Fixed GU10 Fire-Rated Downlight – White
Knightsbridge 230V IP65 Fixed GU10 Fire-Rated Downlight – Chrome VFCFIPC
230V IP65 Fixed GU10 Fire-Rated Downlight – Chrome
Knightsbridge 230V IP65 Fixed GU10 Fire-Rated Downlight – Brushed Chrome VFCFIPBC
230V IP65 Fixed GU10 Fire-Rated Downlight – Brushed Chrome
Knightsbridge 230V IP44 12W RGB and CCT Wi-Fi Downlight WD12RGBW
230V IP44 12W RGB and CCT Wi-Fi Downlight
Knightsbridge IP65 7W LED 3000K Warm White Downlight with White Round Bezel VFRCOBAWW
IP65 7W LED 3000K Warm White Downlight with White Round Bezel
– Fully dimmable
– Supplied complete with LED driver and white bezel as standard
– Optional interchangeable range of bezels in both Round and Square design
– Extended warranty available*
3000K, Warm White, 610lm
Cut out 65mm
*Please note registration for extended warranty is effective up to 12 months from the date the product has been purchased from ML Accessories Limited.
Knightsbridge 230V IP65 8W Fire-Rated Valknight LED Downlight 3000K VFRIC8AWW
Valknight 8W integrated LED downlight
* Dimmable* with most trailing or leading edge dimmers
* Low profile design with aluminium heat sync
* Loop in/loop out terminal
* A selection of bezels in different colours are available (not included)
* 5 year warranty
* Fire Rated – 30/60/90min solid timber, and 30min i-joist (staircraft)
*IC rated for use under standard insulation when installed in conjunction with IC Cage; VFRICC – not included
*Emergency conversion kit available; VFR7EM and ICEMC – not included
3000K, Warm white, 645lm
Cut-out 65mm
*Please check dimmer compatibility before installation
*Supplied without bezel
Knightsbridge Oran Surface Tilt Square Downlight White ORA1TSW
Meet Oran, the Knightsbridge surface mount, architectural downlight solution. The circular or square design compliments any space, with either a white or black finish. Oran’s attractive design is suited to a wide array of applications including, but not limited to, residential, commercial, and hospitality. Oran features a base unit with a thread, with the top simply screwing into place. This ensures the product is easy to install and maintain. The fully adjustable light source (lamps available separately) ensures light can be aimed in any direction.
The complete range is compatible with Knightsbridge GU10 light sources, with dimmable, non-dimmable, and SmartKnight options, boasting a wide array of colour temperatures and controllable parameters.
Knightsbridge is committed to brighter future, and as such, Oran products are packaged in FSC approved packaging.
– Choice of white or black finish
– Surface mount design with rear cable entry
– Circular or square edge
– Tilt as standard
– Raised light source for reduced glare
Knightsbridge Oran Surface Tilt Square Downlight Black ORA1TSB
Meet Oran, the Knightsbridge surface mount, architectural downlight solution. The circular or square design compliments any space, with either a white or black finish. Oran’s attractive design is suited to a wide array of applications including, but not limited to, residential, commercial, and hospitality. Oran features a base unit with a thread, with the top simply screwing into place. This ensures the product is easy to install and maintain. The fully adjustable light source (lamps available separately) ensures light can be aimed in any direction.
The complete range is compatible with Knightsbridge GU10 light sources, with dimmable, non-dimmable, and SmartKnight options, boasting a wide array of colour temperatures and controllable parameters.
Knightsbridge is committed to brighter future, and as such, Oran products are packaged in FSC approved packaging.
– Choice of white or black finish
– Surface mount design with rear cable entry
– Circular or square edge
– Tilt as standard
– Raised light source for reduced glare
Knightsbridge Oran Surface Tilt Round Downlight White ORA1TRW
Meet Oran, the Knightsbridge surface mount, architectural downlight solution. The circular or square design compliments any space, with either a white or black finish. Oran’s attractive design is suited to a wide array of applications including, but not limited to, residential, commercial, and hospitality. Oran features a base unit with a thread, with the top simply screwing into place. This ensures the product is easy to install and maintain. The fully adjustable light source (lamps available separately) ensures light can be aimed in any direction.
The complete range is compatible with Knightsbridge GU10 light sources, with dimmable, non-dimmable, and SmartKnight options, boasting a wide array of colour temperatures and controllable parameters.
Knightsbridge is committed to brighter future, and as such, Oran products are packaged in FSC approved packaging.
– Choice of white or black finish
– Surface mount design with rear cable entry
– Circular or square edge
– Tilt as standard
– Raised light source for reduced glare
Knightsbridge Oran Surface Tilt Round Downlight Black ORA1TRB
Meet Oran, the Knightsbridge surface mount, architectural downlight solution. The circular or square design compliments any space, with either a white or black finish. Oran’s attractive design is suited to a wide array of applications including, but not limited to, residential, commercial, and hospitality. Oran features a base unit with a thread, with the top simply screwing into place. This ensures the product is easy to install and maintain. The fully adjustable light source (lamps available separately) ensures light can be aimed in any direction.
The complete range is compatible with Knightsbridge GU10 light sources, with dimmable, non-dimmable, and SmartKnight options, boasting a wide array of colour temperatures and controllable parameters.
Knightsbridge is committed to brighter future, and as such, Oran products are packaged in FSC approved packaging.
– Choice of white or black finish
– Surface mount design with rear cable entry
– Circular or square edge
– Tilt as standard
– Raised light source for reduced glare