Ethernet and POE over coax converter, Camera side HIGHWIRE-POWERSTAR-VHW-HWPS-C
- Upgrade from analogue to IP cameras without recabling
- Same features as HIGHWIRE with the addition of POE over coax
- POE switch powers HW Base unit, HW camera unit & IP camera
- For maximum range & power Veracitys 57V DC PSU can be used as an alternative to POE in
- Up to 25W POE delivery at IP camera using 57V DC PSU
£182.90EX VAT
You may also like:
305m Category 6A, 4pr F/FTP Blue LSZH SFX/C6A-F-FTP-LSZH-BLU-305
100m Category 7A, 4pr S/FTP Orange LSZH SFX/C7A-S-FTP-LSZH-ORG-100
Ethernet and POE over coax converter, Base side HIGHWIRE-POWERSTAR-VHW-HWPS-B
 |
- Upgrade from analogue to IP cameras without recabling
- Same features as HIGHWIRE with the addition of POE over coax
- POE switch powers HW Base unit, HW camera unit & IP camera
- For maximum range & power Veracitys 57V DC PSU can be used as an alternative to POE in
- Up to 25W POE delivery at IP camera using 57V DC PSU
HIGHWIRE Powerstar lets you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable.
Support for your camera is assured, thanks to HIGHWIRE’s unique full-rate Ethernet over Coax technology, which has been tested and trusted by thousands of IP installers worldwide over the past five years.
And now with POE over Coax, you can deliver up to 25 watts of POE power to the camera as well, eliminating the complexity of installing local power supplies.
Simply add power
With no configuration or measurement required, installation of HIGHWIRE Powerstar is as straightforward as plugging it in.
Two models are used, as shown in the diagram below. The BASE unit receives POE power and transmits it down the coax. The CAMERA unit receives power from the coax and delivers up to full POE Plus power to the IP camera.
If PoE is not available, or for an extra power boost at either end of the cable, just connect the optional power supply.
Installer friendly
For fast installation and guaranteed performance, HIGHWIRE Powerstar features Veracity’s unique SafeView display.
SafeView provides an instant and easy-to-understand confirmation of network and power status right across the cable, with no need to access remote equipment to check connections.
Meanwhile, safe and compliant detection of POE equipment and POE over coax compatibility ensures correct operation, with no risk of damage to non-POE or legacy analog equipment.
Reliability assured
Because the length and quality of installed coaxial cable is hard to predict or measure, it is important to have confidence that the cable you are upgrading has the capacity to deliver continuous, reliable power to the new IP camera.
However, thanks to HIGHWIRE Powerstar’s ultra low-power design and efficient power delivery, even the lowest grade of cheap RG-59 will support a 10 watt IP camera at any range likely to be found in a legacy installation. And once connected, the SafeView power display instantly reaffirms that the actual power available to the camera is sufficient.
For predictable network performance, HIGHWIRE’s proven technology delivers full network bandwidth, right to the limits of range. And secure screw-terminal DC connections, or the option of using a UPS-backed POE source, provide the last link in assuring continuous power delivery.
- Range
See table in datasheet or manual. Examples, with full 100Base-T throughput:
– 10 watts of POE at 265m (880ft) of 22AWG CCS RG-59 from a Veracity power supply
– 10 watts of POE at 300m (1000ft) of 20AWG RG-59 from an 802.3af POE switch
– 20 watts of POE+ at 300m (1000ft) of 20AWG RG-59 from an 802.3at POE+ switch
– 25 watts of POE+ at 500m (1600ft) of 14AWG RG-11 from a Veracity power supply
- Power
Unit power 1.5 watts max BASE POE in IEEE 802.3af or 802.3at, class 4 (25.5W max) CAMERA POE out IEEE 802.3af or 802.3at, any class (25.5W max) DC power input 44-57 volts, 0.7 amps max, class 2 isolated, screw terminal
- Network
100Base-T full-duplex Ethernet with auto-negotiation Patch or crossover cables auto-detected
- Dimensions
84 x 54 x 24mm (3.3 x 2.1 x 0.95in) / 102mm (4in) including connector 100g (3.5oz)
Upgrading to IP
Delivering full network connectivity and standardised, centrally-sourced power without recabling, HIGHWIRE removes many of the barriers to upgrading systems from analog to digital.
New installations
With the familiarity of coaxial cable and the reliability and cost advantages of POE, HIGHWIRE PowerStar is an effective choice for the installation of new IP video systems where cable runs may be very long or inaccessible.
Long range extension
Connecting HIGHWIRE PowerStar units back-to-back allows the network signal to be repeated without local power, enabling extension of Ethernet up to 4km (2.5 miles)
Anywhere there’s coax!
The ability to convert coax into a network connection without requiring power has many advantages in upgrading CATV or satellite systems in hotels or other buildings, among other applications. HIGHWIRE technology has been successfully used with 50 ohm cable and many other non-video types.
.
| Brand |
|---|
We are pleased to offer Standard UK Mainland delivery on all orders.
Please note that Next Day Delivery is available only for items that are currently in stock.
When ordering a West Midland Electrics product, you will find the available delivery options listed below. During the order and checkout process, you can select your preferred option. Our standard delivery schedule is Monday to Friday, 9:00am - 5:00pm. However, it's worth noting that some couriers may deliver slightly earlier or later.
For products that are out of stock or custom made, the delivery time can be up to 4 weeks. We will ensure to keep you updated about the status of your order via email or phone.
If you place an order with multiple items that have different dispatch times, we may consolidate the shipment, so that the products arrive together. However, if there is any delay, we will promptly notify you through email and/or phone.
Please be aware that delivery to certain remote rural areas may take longer than our usual timescales. While we strive to provide efficient delivery service to all our customers, we cannot guarantee the exact timeframe for such locations.
UNITED KINGDOM | Delivery 3-5 working days, subject to stock availability | Delivery Charge (EX VAT) |
England, Wales & Southern Scotland | 3-5 working days | £9.99 (ex VAT) |
| Northern Ireland | *Free delivery not available | £29.99 (ex VAT) |
| Ireland | *Free delivery not available | £19.99 (ex VAT) |
| ENGLAND restrictions apply* | Delivery 3-5 working days | Delivery Charge (ex VAT) |
| Isle of Man | *Free delivery not available | £24.90 (ex VAT) |
| Isle of Wight | *Free delivery not available | £24.90 (ex VAT) |
| Channel Islands | *Free delivery not available | £24.90 (ex VAT) |
| EU Countries | Price On Application | (Email/Call Us) |
| Rest Of World | Price On Application | (Email/Call Us) |
IMPORTANT – Good supplied as ordered and returned for credit must be accompanied by an Invoice Number. We reserve the right to retain such sums as equal to the value by which the goods have diminished as a result of handling by you, the consumer, beyond what is necessary to establish the nature, characteristics and functioning of the goods. You will be liable for the cost of return of goods and costs of services provided during the cancellation period, or deduction for use. Special orders cannot be returned for credit or exchange
1. FAULTY PRODUCTS
a) Products that are faulty must be returned within the manufacturers' warranty period which is usually 12 months.
b) The complete product must be returned unless, if agreed by the Company, a specific part may be returned.
c) Products within the manufacturers' specific warranty period will be repaired, replaced, or a refund given at the discretion of the Company.
West Midland Electrics does not accept liability for indirect or consequential loss.
2. NON-FAULTY GOODS
a) Products must be complete and in their original packaging with any instruction leaflets.
b) Products must be returned within 28 days of receipt.
c) Refunds for any products not required are at the discretion of the Company.
d) Non-standard products that have been ordered specially cannot be refunded under any circumstances.
e) Customers are responsible for covering the cost of and arranging returns of non faulty goods.
f) Handling charges apply to all home lighting products.
3. PROCEDURE FOR RETURNING FAULTY PRODUCTS TO West Midland Electrics (or requesting a replacement).
Please contact the branch that supplied the goods and have ready the following information:
a) The invoice number
b) The date of purchase
c) The product code(s)
d) The reason for returning the products
You will be advised of how the products will be exchanged or of the issue of a refund.
4. SHORT OR NON-DELIVERY
If you experience a short or non delivery, please contact the branch that supplied the goods and have ready the following information:
a) The invoice number
b) The date of purchase
c) The product code(s)
Our sales advisers will investigate the problem and refer back to you as soon as possible.
