Ethernet over coax converter HIGHWIRE-VHW-HW
- Uses legacy cabling – cuts installation costs
- HIGHWIRE supports HD & Mega-Pixel cameras
- Fully transparent duplex 100Base-T Ethernet
- Simple to install – no IP address or other setup
- Up to 300 metres on RG59, or 500 metres on RG11
- 12-40V DC or 24V AC power input
£128.90EX VAT
You may also like:
2 port ethernet & PoE over coax HIGHWIRE-POWERSTAR-DUO-VHW-HWPS-C2
- Uses legacy cabling – cuts installation costs
- HIGHWIRE supports HD & Mega-Pixel cameras
- Fully transparent duplex 100Base-T Ethernet
- Simple to install – no IP address or other setup
- Up to 300 metres on RG59, or 500 metres on RG11
- 12-40V DC or 24V AC power input
The Veracity HIGHWIRE VHW-HW is a single Ethernet over co-axial video device. It has a standard RJ-45 network connector one side and a co-axial BNC connector on the other. Used in pairs, one Highwire unit is attached at each end of a co-axial video cable by BNC connectors providing a straight RJ-45 to RJ-45 Ethernet connection from its opposite end.
The HIGHWIRE unit is designed to utilise existing legacy co-axial video cabling allowing you to migrate to digital IP CCTV without having to install any new cabling. This enables your original investment to be retained saving installation time and costs.
Easy to install, the Highwire VHW-HW needs no network configuration and is completely transparent to other devices on the network. Simply plug in and your co-ax video cable becomes part of your Ethernet network offering full speeds of up to 200Mbps.
Veracity HIGHWIRE VHW-HW – Key benefits:
- Legacy co-axial video cabling can be retained and used for new generation digital IP CCTV surveillance applications providing significant cost savings
- High transfer rate of 200Mbps (max.) allows the use of megapixel or multiple IP cameras to run from a single connection
Veracity HIGHWIRE VHW-HW – Key features:
- Uses legacy analogue video cabling cutting installation costs
- High transfer speed allows megapixel cameras or multiple IP cameras to run across a single co-ax cable connection
- Fully transparent. Will fully support any network device. Highwire is non-detectable on the network
- Simple to install. The Highwire VHW-HW requires no network configuration, has no IP or MAC address
- Can operate at a maximum length of 300m, full speed of 200mbps at lengths of 200m or less
- Auto adapts. Where cable length, quality or interference prevents full rate operation (200Mbps) the device will auto-adapt lowering the total bandwidth as necessary
- Compact and low power. Designed to fit inside camera housings and use the camera power supply (please have an electrician check supply voltages before using camera supply to power Highwire unit)
Veracity HIGHWIRE VHW-HW – Typical applications:
- Ideal for migrating from analogue CCTV to digital IP CCTV systems. Allows the use of existing analogue co-axial cables reducing installation time and costs
Veracity HIGHWIRE VHW-HW – Key technical indicators:
- Analogue interface: BNC connector 75ohm, up to 300m (200m for full data rate)
- Data throughput max.: 200Mbps (total up + down). Auto-adaptation to cable conditions
- Ethernet interface: RJ-45, straight-through or cross-over (auto detected), 100BaseT/10BaseT, full/half duplex with auto negotiation
- Operating voltage: Nominal 12V DC (9-24V working range) or 24V AC (type and polarity auto detected)
- Supply current: 200mA (12V), 100mA (24V)
- Operating temperature: -10°C to 50°C
- Dimensions: (HxWxD) 23 x 54 x 83mm (104mm including connections)
- Weight: 110g (4oz.)
Veracity HIGHWIRE VHW-HW – Connections:
- Analogue connector: BNC 75ohm
- Ethernet connector: RJ-45
- Power input 12V DC or 24V AC terminal block connector
| Brand |
|---|
We are pleased to offer Standard UK Mainland delivery on all orders.
Please note that Next Day Delivery is available only for items that are currently in stock.
When ordering a West Midland Electrics product, you will find the available delivery options listed below. During the order and checkout process, you can select your preferred option. Our standard delivery schedule is Monday to Friday, 9:00am - 5:00pm. However, it's worth noting that some couriers may deliver slightly earlier or later.
For products that are out of stock or custom made, the delivery time can be up to 4 weeks. We will ensure to keep you updated about the status of your order via email or phone.
If you place an order with multiple items that have different dispatch times, we may consolidate the shipment, so that the products arrive together. However, if there is any delay, we will promptly notify you through email and/or phone.
Please be aware that delivery to certain remote rural areas may take longer than our usual timescales. While we strive to provide efficient delivery service to all our customers, we cannot guarantee the exact timeframe for such locations.
UNITED KINGDOM | Delivery 3-5 working days, subject to stock availability | Delivery Charge (EX VAT) |
England, Wales & Southern Scotland | 3-5 working days | £9.99 (ex VAT) |
| Northern Ireland | *Free delivery not available | £29.99 (ex VAT) |
| Ireland | *Free delivery not available | £19.99 (ex VAT) |
| ENGLAND restrictions apply* | Delivery 3-5 working days | Delivery Charge (ex VAT) |
| Isle of Man | *Free delivery not available | £24.90 (ex VAT) |
| Isle of Wight | *Free delivery not available | £24.90 (ex VAT) |
| Channel Islands | *Free delivery not available | £24.90 (ex VAT) |
| EU Countries | Price On Application | (Email/Call Us) |
| Rest Of World | Price On Application | (Email/Call Us) |
IMPORTANT – Good supplied as ordered and returned for credit must be accompanied by an Invoice Number. We reserve the right to retain such sums as equal to the value by which the goods have diminished as a result of handling by you, the consumer, beyond what is necessary to establish the nature, characteristics and functioning of the goods. You will be liable for the cost of return of goods and costs of services provided during the cancellation period, or deduction for use. Special orders cannot be returned for credit or exchange
1. FAULTY PRODUCTS
a) Products that are faulty must be returned within the manufacturers' warranty period which is usually 12 months.
b) The complete product must be returned unless, if agreed by the Company, a specific part may be returned.
c) Products within the manufacturers' specific warranty period will be repaired, replaced, or a refund given at the discretion of the Company.
West Midland Electrics does not accept liability for indirect or consequential loss.
2. NON-FAULTY GOODS
a) Products must be complete and in their original packaging with any instruction leaflets.
b) Products must be returned within 28 days of receipt.
c) Refunds for any products not required are at the discretion of the Company.
d) Non-standard products that have been ordered specially cannot be refunded under any circumstances.
e) Customers are responsible for covering the cost of and arranging returns of non faulty goods.
f) Handling charges apply to all home lighting products.
3. PROCEDURE FOR RETURNING FAULTY PRODUCTS TO West Midland Electrics (or requesting a replacement).
Please contact the branch that supplied the goods and have ready the following information:
a) The invoice number
b) The date of purchase
c) The product code(s)
d) The reason for returning the products
You will be advised of how the products will be exchanged or of the issue of a refund.
4. SHORT OR NON-DELIVERY
If you experience a short or non delivery, please contact the branch that supplied the goods and have ready the following information:
a) The invoice number
b) The date of purchase
c) The product code(s)
Our sales advisers will investigate the problem and refer back to you as soon as possible.
