Fike 505-0002 TwinflexPro2 2 Wire 2 Zone Control Panel (CPR Compliant) Fike-Twinflex-2-Zone-Panel
- 4 line x 20 character LCD display
- Ability to differentiate between smoke detector, heat detector or a manual call point alarms
- Alarm confirmation feature
- Available in 2, 4, and 8 zone panel versions
- RS485 Connection to up to 8 Repeater panels
- Highlighted selection menu
- Event log storing up to 500 events
- 3 enhanced test modes
- Allows detectors and sounders to be installed on the same pair of wires
- Up to 32 devices per zone
- Built-in EOL capability in all devices
- 7 modes of detection
- Zone can be configured to day/night detection mode
- Delay programming options
£196.90EX VAT
You may also like:
Morley MAx 2 Loop Panel SSE, Apollo Protocols Morley-MAx-2-Loop-Panel-SSE-Apollo-Protocols
Morley PANEL DXc4-M FOUR LOOP Morley-PANEL-DXc4-M-FOUR-LOOP
Fike TwinflexPro2 2 Wire 4 Zone Control Panel (CPR Compliant) – 505-0004 FIKE-Twinflex-4-Zone-Panel
Fike TwinflexPro2 2 Wire 8 Zone Control Panel (CPR Compliant) – 505-0008 FIKE-Twinflex-8-Zone-Panel
Morley MAx 2 Loop Panel SSE, Apollo Protocols Morley-MAx-2-Loop-Panel-SSE-Apollo-Protocols
Morley MAx 4 Loop Exp. 6/8 loop SSE,Apollo Morley-MAx-4-Loop-Exp.-6/8-loop-SSE-Apollo
The TwinflexPro2 panel is an intelligent 2-wire panel that utilises a conventional type cabling format. The system is classed as Analogue non-addressable due to the architecture used within the design. The devices communicate with the control panel using the Twinflex data protocol. The TwinflexPro2 panel is available in 2,4 & 8 zone variants which support up to 32 Twinflex devices per circuit. The TwinflexPro2 is able to recognise and separately identify between smoke detector, heat detector and a manual call point alarm.
The panel also monitors each zone for detector head removal, device fault, End of line fault and open or short circuit fault. The panel provides two monitored outputs that may be configured as conventional sounder circuits, a volt free common fire relay and a volt free common fault relay. There are also two multifunction latching/non-latching inputs and one monitored input programmable with options such as Class-Change and Remote fire. The control panel also incorporates an integral power supply unit and requires 2 x 12V 3.2Ah batteries to provide up to 72-hour standby times.
The panel features a 500-event log, day/night mode, alarm confirmation and delay programming options that can be configured using the keypad or via PC driven OSP software. The TwinflexPro2 panel is no longer only compatible with Fike’s Twinflex devices, with the addition of our conventional zone card a 4 or 8 zone panel can now be configured to accept conventional devices on zones 5 to 8.
Unlike most conventional fire alarm systems, which require separate pairs of cables for detector zones and sounder circuits, the Twinflex system requires one 2-core screened cable for each zone to accommodate both detection devices and sounders when using Twinflex devices.
Key Features:
- 4 line x 20 character LCD display
- Ability to differentiate between smoke detector, heat detector or a manual call point alarms
- Alarm confirmation feature
- Available in 2, 4, and 8 zone panel versions
- RS485 Connection to up to 8 Repeater panels
- Highlighted selection menu
- Event log storing up to 500 events
- 3 enhanced test modes
- Allows detectors and sounders to be installed on the same pair of wires
- Up to 32 devices per zone
- Built-in EOL capability in all devices
- 7 modes of detection
- Zone can be configured to day/night detection mode
- Delay programming options
| Brand |
|---|
We are pleased to offer Standard UK Mainland delivery on all orders.
Please note that Next Day Delivery is available only for items that are currently in stock.
When ordering a West Midland Electrics product, you will find the available delivery options listed below. During the order and checkout process, you can select your preferred option. Our standard delivery schedule is Monday to Friday, 9:00am - 5:00pm. However, it's worth noting that some couriers may deliver slightly earlier or later.
For products that are out of stock or custom made, the delivery time can be up to 4 weeks. We will ensure to keep you updated about the status of your order via email or phone.
If you place an order with multiple items that have different dispatch times, we may consolidate the shipment, so that the products arrive together. However, if there is any delay, we will promptly notify you through email and/or phone.
Please be aware that delivery to certain remote rural areas may take longer than our usual timescales. While we strive to provide efficient delivery service to all our customers, we cannot guarantee the exact timeframe for such locations.
UNITED KINGDOM | Delivery 3-5 working days, subject to stock availability | Delivery Charge (EX VAT) |
England, Wales & Southern Scotland | 3-5 working days | £9.99 (ex VAT) |
| Northern Ireland | *Free delivery not available | £29.99 (ex VAT) |
| Ireland | *Free delivery not available | £19.99 (ex VAT) |
| ENGLAND restrictions apply* | Delivery 3-5 working days | Delivery Charge (ex VAT) |
| Isle of Man | *Free delivery not available | £24.90 (ex VAT) |
| Isle of Wight | *Free delivery not available | £24.90 (ex VAT) |
| Channel Islands | *Free delivery not available | £24.90 (ex VAT) |
| EU Countries | Price On Application | (Email/Call Us) |
| Rest Of World | Price On Application | (Email/Call Us) |
IMPORTANT – Good supplied as ordered and returned for credit must be accompanied by an Invoice Number. We reserve the right to retain such sums as equal to the value by which the goods have diminished as a result of handling by you, the consumer, beyond what is necessary to establish the nature, characteristics and functioning of the goods. You will be liable for the cost of return of goods and costs of services provided during the cancellation period, or deduction for use. Special orders cannot be returned for credit or exchange
1. FAULTY PRODUCTS
a) Products that are faulty must be returned within the manufacturers' warranty period which is usually 12 months.
b) The complete product must be returned unless, if agreed by the Company, a specific part may be returned.
c) Products within the manufacturers' specific warranty period will be repaired, replaced, or a refund given at the discretion of the Company.
West Midland Electrics does not accept liability for indirect or consequential loss.
2. NON-FAULTY GOODS
a) Products must be complete and in their original packaging with any instruction leaflets.
b) Products must be returned within 28 days of receipt.
c) Refunds for any products not required are at the discretion of the Company.
d) Non-standard products that have been ordered specially cannot be refunded under any circumstances.
e) Customers are responsible for covering the cost of and arranging returns of non faulty goods.
f) Handling charges apply to all home lighting products.
3. PROCEDURE FOR RETURNING FAULTY PRODUCTS TO West Midland Electrics (or requesting a replacement).
Please contact the branch that supplied the goods and have ready the following information:
a) The invoice number
b) The date of purchase
c) The product code(s)
d) The reason for returning the products
You will be advised of how the products will be exchanged or of the issue of a refund.
4. SHORT OR NON-DELIVERY
If you experience a short or non delivery, please contact the branch that supplied the goods and have ready the following information:
a) The invoice number
b) The date of purchase
c) The product code(s)
Our sales advisers will investigate the problem and refer back to you as soon as possible.
