Fire & Safety
Hochiki ALN-ENALG-ENWHT Hochiki-ALN-ENALG-ENWHT
The ALN-EN incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications.
This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.
Control Panel compatibility required.
Hochiki YBO-R/3RED Hochiki-YBO-R/3RED
Model YBO-R/3(RED) is a Sounder Mounting Base, which is fully compatible with Hochiki’s ESP range of wall sounders, the CHQ-WS2 Wall Sounder and the CHQ-WSB Wall Sounder Beacon.
It is supplied with square cable clamps for secure and reliable cable termination.
Hochiki YBO-BSWHT Hochiki-YBO-BSWHT
Model YBO-BS is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base (YBO-R/SCI – from Batch Number 6044) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators.
The unit can also be converted into a wall sounder with the simple addition of a Cap (SI/CAP). The sounder is Ingress Protection rated to IP21 and for internal use only.
An Auto-Shutdown feature allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, cutting noise pollution (dependant on control panel compatibility).Model YBO-BS is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base (YBO-R/SCI – from Batch Number 6044) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators.
The unit can also be converted into a wall sounder with the simple addition of a Cap (SI/CAP). The sounder is Ingress Protection rated to IP21 and for internal use only.
An Auto-Shutdown feature allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, cutting noise pollution (dependant on control panel compatibility).
Hochiki YBN-R/3WHT Hochiki-YBN-R/3WHT
Model YBN-R/3 is a Common Mounting Base, which is fully compatible with Hochiki’s ESP range of sensors.
It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.
Hochiki TCH-B200 Hochiki-TCH-B200
Model TCH-B200 is a hand held address programmer designed to address the ESP range of Sensors and all other addressable devices such as wall sounders, mini-modules and manual call points (with the use of a programming lead – sold separately). The unit is designed to be light, robust and easy to use and operates from a single PP3 size battery, which gives the capacity for up to 8000 operations. The programmer is also capable of displaying the sensor analogue values.
Hochiki DFG-60BLKJ Hochiki-DFG-60BLKJ
- Waterproof design rated to IP67
- Low profile shape
- Utilises a bi-metallic strip to sense temperature change
- No Mounting base required
- Minimal standby current
- Approved by LPCB & VdS
Hochiki CHQ-WSB2/WL Hochiki-CHQ-WSB2/WL
Model CHQ-WSB2/WL is an EN54-23 compliant addressable loop powered Wall Sounder Beacon innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption. The unit features an integral beacon within the horn utilising high intensity LED technology and is designed to fit to the Standard Base (YBO-R/3(RED)) or the Isolator Base (YBO-R/SCI(RED)). The sounder is IP rated to IP21 for internal use but it can be made weatherproof by utilising the WS2-WPK Weatherproof Kit, which consists of a specialised back box and gasket set.
Also incorporates an auto shutdown mode* which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.
*Dependent on control panel compatibility.
Hochiki CHQ-WS2 Hochiki-CHQ-WS2
Model CHQ-WS2 is an addressable loop powered Wall Sounder innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBO-R/3(RED)) or the Isolator Base (YBO-R/SCI(RED)). The sounder is IP rated to IP21 for internal use but it can be made weatherproof by utilising the WS2-WPK Weatherproof Kit, which consists of a specialised back box and gasket set.
Also incorporates an auto shutdown mode* which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.
*Dependent on control panel compatibility.
Hochiki CHQ-DSC2SCI Hochiki-CHQ-DSC2SCI
Model CHQ-DSC2(SCI) is a Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.
The unit utilises simple DIL switches for reliable addressing. A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQ-DSC2(SCI), increases the IP rating to IP65.
Hochiki CHQ-CB/WLWHT Hochiki-CHQ-CB/WLWHT
- EN54-23 compliant
- Loop powered
- High intensity flash
- Range of coverage diameters
- White LEDs
- Colour-matched with existing sensor range
- Approved by LPCB (Certificate No 164s/04
Hochiki CHQ Hochiki-CHQ
The CHQ-BACKBOX is designed for installations where the CHQ Range of Modules – CHQ-DIM(SCI), CHQ-SZM(SCI), CHQ-DZM(SCI), CHQ-DSC(SCI), CHQ-MRC(SCI), CHQ-DRC(SCI) and CHQ-PCM – require mounting within a glanded enclosure.
The unit features ten knock-outs suitable for cable glands (not supplied) and accepts the CHQ Modules directly as a lid
Hochiki ATJ-EN Hochiki-ATJ-EN
The ATJ-EN incorporates a variable temperature heat element and a rate of rise heat element, both of which are controlled from the Control Panel, allowing either thermal element or both elements simultaneously to be active in making the fire decision.
The sensor polling LEDs can also be controlled via the Control Panel (pulsing/non-pulsing)*.
*Control Panel compatibility required
Hochiki ACC-EN Hochiki-ACC-EN
The ACC-EN has 3 modes, which are controlled from the Control Panel*, allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel (pulsing/non-pulsing). The ACC-E smoke chamber can esily be removed or replaced for easy maintentance
*control panel compatibility required
Hochiki ACB-EW Hochiki-ACB-EW
Model ACB-EW is a Waterproof Multi-Heat Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.
The ACB-EW incorporates a variable Fixed Temperature heat element and a Rate Of Rise heat element, both of which are controlled from the Control Panel, allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LED’s can also be controlled via the Control Panel (pulsing/non-pulsing)*.
Rated to IP67, the ACB-EW can be used externally and is supplied with its own fixing base which is used to fix the sensor. Flying leads from the sensor connect directly to the loop via waterproof connectors.
*control panel compatibility required
Fike 402-0006 Twinflex Callpoint with cover Fike-402-0006-Twinflex-Callpoint-with-cover
The Twinflex Manual Call Point (MCP) allows for user activation of the fire alarm system. Once operated the device latches into the alarm position and requires manually resetting via a special key.
This device is compatible with the range of Twinflex Fire Alarm Control Panels and comprises a 2-wire zone-powered Manual Call Point (MCP). This device may be installed on the same zone as the Twinflex Multipoint detector/sounder and other associated Twinflex devices.
Re-settable element
LED indication for end of line
Includes reset key and protective cover
Can be surface/flush mounted
Fike 302-0012 Twinflex Flashpoint low profile Fike-302-0012-Twinflex-Flashpoint-low-profile
Ideal as a visual indicator directly from the 2-wire zone
Complies with European Standard EN54 part 4
During the alarm, the flashpoint synchronisation is uniquely reset every 10 seconds.
For simple installation, first fix the base then simply plug in the unit
Anti-tamper mechanism – will only be released with the head removal tool
Fike 302-0001 Twinflex Hatari Sounder Red Fike-302-0001-Twinflex-Hatari-Sounder-Red
The twinflex Hatari is designed to comply with the European standard EN54 part 3. The stand alone Hatari sounder can be utilised where extra sound output on the zone is a requirement, or for areas that do not require automatic detection technology. The field wiring is terminated to fixed connectors in the base, and a deep base is available as a separate item if required.
A bayonet locking mechanism means the sounder is easy to install and the anti-tamper feature ensures that the Hatari is only released with the use of the head removal tool
Fully Selectable Sounder Output Level
100 dB Output
Upto 6 Per Zone
Anti-tamper Bayonet Locking Mechanism
Fike TwinflexPro2 2 Zone Boxed Kit (Approved) – 604-0002 Fike-Twinflex-2-Zone-Kit
The Fike 604-0002 is a 2 Zone Contractor Kit ideal for use in buildings in the UK.
This kit is based upon the popular Fike Twinflex Pro range of two wire fire alarm system equipment. This means that the detectors, call points and sounders can all be installed on the same zone circuit. This reduces installation costs, time and disruption compared to traditional conventional fire alarm systems, where the sounders would need to be installed separately to the detectors and call points. This kit includes the Twinflex Multipoint detectors which can be used as either a smoke or heat detector. This is selectable by simply adjusting the switches on the reverse of the detector. This means that separate smoke and heat detectors don’t need to be ordered.
The Fike 604 0002 2 Zone Contractor Kit includes the following equipment:
- 1 x Fike 505 0002 Twinflex Pro 2 Zone Fire Alarm Control Panel
- 7 x Fike 204 0001 Twinflex Multipoint Detector with Sounder
- 2 x Fike 402 0006 Manual Call Point
- 1 x Fike 25 0046 201 Detector Head Removal Tool
Fike TwinflexPro2 2 Wire 8 Zone Control Panel (CPR Compliant) – 505-0008 FIKE-Twinflex-8-Zone-Panel
- 4 line x 20 character LCD display
- Ability to differentiate between smoke detector, heat detector or a manual call point alarms
- Alarm confirmation feature
- Available in 2, 4, and 8 zone panel versions
- RS485 Connection to up to 8 Repeater panels
- Highlighted selection menu
- Event log storing up to 500 events
- 3 enhanced test modes
- Allows detectors and sounders to be installed on the same pair of wires
- Up to 32 devices per zone
- Built-in EOL capability in all devices
- 7 modes of detection
- Zone can be configured to day/night detection mode
- Delay programming options
Best sellers...
Knightsbridge 230V IP65 3W LED Emergency Bulkhead Maintained/Non- Maintained EMLED4L
