Lighting Accessories
Knightsbridge 230V IP65 T8 Twin LED Ready Anti-Corrosive Fitting (6ft) NCLB26
230V IP65 Twin Non Corrosive LED T8 batten fitting, (6ft) .
LED ready without a ballast or driver. Tough impact resistant polycarbonate body and diffuser ideal for industrial and commercial applications. Supplied pre-wired for use with dedicated T8 LED self ballasted tubes .
LED tube not included.
Knightsbridge 230V IP65 T8 Single LED Ready Anti Corrosive Fitting (6ft) NCLB16
230V IP65 Single Non Corrosive LED T8 batten fitting, (6ft) .
LED ready without a ballast or driver. Tough impact resistant polycarbonate body and diffuser ideal for industrial and commercial applications. Supplied pre-wired for use with dedicated T8 LED self ballasted tubes .
LED tube not included.
Knightsbridge 12V IP20 LED Bendable Flex Daylight 6500K (5 metres) LEDFS12DL
12V IP20 LED S-shaped bendable flex, Daylight, 6500K, 5 metres
– 60 x 2835 SMD LEDs per metre
– 5W per metre
– Supplied with 3M self-adhesive tape
– Requires 12V constant voltage driver
– Range of connectors and accessories available
– Dimmable with appropriate control gear
Can be cut as required, at 50mm intervals
6500K, daylight, 610lm per metre
IP20, internal use only
Ideal flexible LED lighting solution
Unique S shaped Flex enables easy installation around bends and corners
Knightsbridge 230V IP65 4ft 23W Single LED Non-Corrosive TRLED14
230V IP65 4ft 23W Single LED built in Non-Corrosive
Ideal for industrial and commercial applications
– Energy efficient integral high output LED
– Indoor and outdoor use
– Ideal replacement for standard fluorescent fixtures
– Complete with fixing accessories
– Tough impact resistant polycarbonate body and diffuser
– 5 year warranty
– 10 lockable clips supplied as standard
4000K, 2650lm
Knightsbridge 230V IP65 T8 Twin LED Ready Anti-Corrosive Fitting (5ft) NCLB25
230V IP65 Twin Non Corrosive LED T8 batten fitting, (5ft) .
LED ready without a ballast or driver. Tough impact resistant polycarbonate body and diffuser ideal for industrial and commercial applications. Supplied pre-wired for use with dedicated T8 LED self ballasted tubes .
LED tube not included.
Knightsbridge 230V IP54 5W LED Security Amenity Bulkhead C/W M-Sensor Black AMLEDBS
230V IP54 5W LED Security Amenity Bulkhead with sensor- 4000K. Robust polycarbonate base and diffuser. Industrial, commercial and domestic use. A long-life, low cost, energy efficient, hard wearing light source for areas where low level/security lighting is required. Ideal for Site Lighting and suitable for indoor and outdoor applications.
– 3 year warranty (30,000 hrs)
– Black base, opal diffuser
– Supplied with integral microwave sensor adjustable sensitivity/time delay/ lux control
– 410lm
Knightsbridge 230V IP54 5W LED Security Amenity Bulkhead C/W M-Sensor White AMLEDWS
230V IP54 5W LED Security Amenity Bulkhead with sensor- 4000K. Robust polycarbonate base and diffuser. Industrial, commercial and domestic use. A long-life, low cost, energy efficient, hard wearing light source for areas where low level night time security lighting is required. Ideal for Site Lighting and suitable for indoor and outdoor applications.
– 3 Year Warranty (30,000 hrs)
– White base, opal diffuser
– Supplied with integral microwave sensor adjustable sensitivity/time delay/ lux control
– 410lm
Knightsbridge 230V IP65 T8 Twin LED Ready Anti Corrosive Fitting (4ft) NCLB24
230V IP65 Twin Non Corrosive LED T8 batten fitting, (4ft) .
LED ready without a ballast or driver. Tough impact resistant polycarbonate body and diffuser ideal for industrial and commercial applications. Supplied pre-wired for use with dedicated T8 LED self ballasted tubes .
LED tube not included.
Knightsbridge 230V IP65 T8 Single LED Ready Anti Corrosive Fitting (5ft) NCLB15
230V IP65 Single Non Corrosive LED T8 batten fitting, (5ft) .
LED ready without a ballast or driver. Tough impact resistant polycarbonate body and diffuser ideal for industrial and commercial applications. Supplied pre-wired for use with dedicated T8 LED self ballasted tubes .
LED tube not included.
Knightsbridge 230V IP54 5W LED Security Amenity Bulkhead Black Base with Red Diffuser AMLEDR
230V / 110V IP54 5W LED Security Amenity Bulkhead. Robust polycarbonate base and diffuser. Industrial, commercial and domestic use. A long-life, low cost, energy efficient, hard wearing light source for areas where continuous low level/security lighting is required. Ideal for Site lighting unit works on both 110V and 230V and suitable for indoor and outdoor applications.
– 3 Year Warrant (30,000 hrs)
– Black base, red diffuser
– 57.5lm
Knightsbridge IP20 24V 12W LED Driver – Constant Voltage 24VDCA
24V 12W Constant voltage driver
Knightsbridge 230V IP65 T8 Single LED Ready Anti Corrosive Fitting (2ft) NCLB12
230V IP65 Single Non Corrosive LED T8 batten fitting, (2ft) .
LED ready without a ballast or driver. Tough impact resistant polycarbonate body and diffuser ideal for industrial and commercial applications. Supplied pre-wired for use with dedicated T8 LED self ballasted tubes .
LED tube not included.
Knightsbridge FireKnight/ProKnight/ValKnight Hole Converter (up to 130mm) Brushed Chrome VFRCBC
Hole converter for the VFR fixed range of LED fire-rated downlights.The converter allows the down-light to be used for cutouts between 65mm-130mm (lamps not included).
Compatible with VFRCOB / VFR8 / VFRIC8
Knightsbridge BT9 Eyelid Accessory Silver BT9ES
BT9 Silver Eyelid Accessory.
Simply push to fit. Manufactured from polycarbonate. This accessory allows the BT9 to be used in areas where lighting control is required, minimising light pollution and focusing light on areas where it is needed. Ideal for walkways and entrance areas. Suitable for internal and external use.
Knightsbridge Square Chrome Bezel for VFRCOB Downlights VFRSBEZCH
Square Chrome Bezel for VFRCOB Downlights 80mm x 80mm
Knightsbridge Square Brushed Chrome Bezel for VFRCOB Downlights VFRSBEZCBR
Square Brushed Chrome Bezel for VFRCOB Downlights 80mm x 80mm