Results per page 20 All
£22.90EX VAT
Add to Cart

Knightsbridge 12V / 24V RF Touch Controller and Remote – RGBW LEDFRA6

SKU: LEDFRA6

12V / 24V RF LED flex remote and controller – RGBW

– 12V / 24V compatible
– Max. wattage: 12V /288W, 24V/ 576W
– Detection range: 30 metres
– Touch Panel control
– Wireless RF signal control
– Compatible with RGBW LED flex

Supplied with;
– RF controller
– Touch panel remote
– Remote requires 2 x AAA batteries (not included)

IP20, for internal use only

All max. ranges are approximation only, these are subject to environment

£23.90EX VAT
Add to Cart

Ener-J Non Dimmable + WiFi 5A RF Mini Receiver

SKU: WS1057M

Upgrade your lighting control experience with ENER-J’s 500W RF Magic Receiver, meticulously crafted to seamlessly integrate with our ECO Range Series Wireless Kinetic Switches. This enchanting receiver module not only transforms any existing or traditional switch into a 2-way module but also empowers you to wirelessly command your lights through kinetic switches, ensuring unparalleled convenience and flexibility. Boasting an impressive range of up to 20 meters indoors and 80 meters outdoors (subject to the number and thickness of walls in between), you can effortlessly manage your lights using the wireless kinetic switches (sold separately). The receiver’s sleek and robust design suits diverse lighting setups, and installation is a breeze, complete with safety features for worry-free operation. Elevate your lighting control to a new realm of sophistication.

Upgrade Your Switch to a 2-Way: Say goodbye to concerns about your traditional switch always being on for your wireless switch to function. Our innovative receiver module works like magic—whether your hard-wired switch is off or on, the kinetic switch effortlessly toggles it in the opposite direction and vice versa. Enjoy seamless control and eliminate worries about switch positions.

Easy Installation: The 500W RF Magic Receiver Module is easily wired between the light fixture and the power supply, enabling seamless integration with your lighting setup.

Energy-Efficient: The receiver is self-protected and fused with a maximum load of 5A, providing a durable and energy-efficient solution for your lighting control needs.

Ultra-Thin Design: With a slim profile, the remote-controlled light switch can be used under special conditions or even installed outdoors (inside a waterproof box) for added convenience.

Durable & Flexible Coding: Designed with ultra-low power consumption, the receiver can run up to 200,000 hours, offering a 20-year lifetime. It allows one switch to control multiple lights or multiple switches to control one light, offering versatile control options.

SpecificationValue
Power ModeKinetic Energy/Self Powered
Work Type86 Push Button Type
VoltageAC 100-250V
ColourWhite
Operating Temperature-20°C to 50°C
DistanceUp to 20m Indoor and 80m Outdoor
CommunicationRF 433MHz
WiFiNot Compatible
Product Size64mm x 32mm x 24mm
Weight35g
Warranty2 Years
  • 500W RF Receiver
  • User Manual (English)
£18.90EX VAT
Add to Cart

Ener-J Non Dimmable 5A RF Mini Receiver

SKU: WS1055M

Upgrade your lighting control experience with ENER-J’s 500W RF Magic Receiver, meticulously crafted to seamlessly integrate with our ECO Range Series Wireless Kinetic Switches. This enchanting receiver module not only transforms any existing or traditional switch into a 2-way module but also empowers you to wirelessly command your lights through kinetic switches, ensuring unparalleled convenience and flexibility. Boasting an impressive range of up to 20 meters indoors and 80 meters outdoors (subject to the number and thickness of walls in between), you can effortlessly manage your lights using the wireless kinetic switches (sold separately). The receiver’s sleek and robust design suits diverse lighting setups, and installation is a breeze, complete with safety features for worry-free operation. Elevate your lighting control to a new realm of sophistication.

Upgrade Your Switch to a 2-Way: Say goodbye to concerns about your traditional switch always being on for your wireless switch to function. Our innovative receiver module works like magic—whether your hard-wired switch is off or on, the kinetic switch effortlessly toggles it in the opposite direction and vice versa. Enjoy seamless control and eliminate worries about switch positions.

Easy Installation: The 500W RF Magic Receiver Module is easily wired between the light fixture and the power supply, enabling seamless integration with your lighting setup.

Energy-Efficient: The receiver is self-protected and fused with a maximum load of 5A, providing a durable and energy-efficient solution for your lighting control needs.

Ultra-Thin Design: With a slim profile, the remote-controlled light switch can be used under special conditions or even installed outdoors (inside a waterproof box) for added convenience.

Durable & Flexible Coding: Designed with ultra-low power consumption, the receiver can run up to 200,000 hours, offering a 20-year lifetime. It allows one switch to control multiple lights or multiple switches to control one light, offering versatile control options.

SpecificationValue
Power ModeKinetic Energy/Self Powered
Work Type86 Push Button Type
VoltageAC 100-250V
ColourWhite
Operating Temperature-20°C to 50°C
DistanceUp to 20m Indoor and 80m Outdoor
CommunicationRF 433MHz
WiFiNot Compatible
Product Size64mm x 32mm x 24mm
Weight35g
Warranty2 Years
  • 500W RF Receiver
  • User Manual (English)
£10.90EX VAT
Add to Cart

ALL LED 32 Step PIR Stair Light Controller With Digital SPI Output

SKU: ASCDIM/SLC32
  • 32 Step Capacity, 1A Per Step Max
  • 2 x Digital RGB SPI Signal Output, Compatible With 28 Digital LED Strip ICs
  • Easy Programming With OLED Display
  • Integrated Rapid Self-Test Function
  • 4 Selectable LED Strip Modes
  • Adjustable Colour, Speed And Brightness Modes
  • 2 x PIR Sensors & Daylight Sensor, Option To Use A Retractive Switch
  • PIR Cut-out 20mm
  • Can Be Used With Constant Voltage Single Colour LED Strip Or Digital/SPI RGB Strip
£139.90EX VAT
Add to Cart

Ener-J Microwave Sensor for LED Panel Light

SKU: T345

The sensor is an active motion detector, it emits high-frequency electro-magnetic wave(5.8GHz)and receives their echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microprocessor then triggers the “switch light ON” command. Detection is possible through doors, panes of glass or thin walls.

£12.90EX VAT
Add to Cart

Ener-J Dimmable + WiFi 1.5A Mini Receiver

SKU: WS1056M

Upgrade your lighting control experience with ENER-J’s 500W RF Magic Receiver, meticulously crafted to seamlessly integrate with our ECO Range Series Wireless Kinetic Switches. This enchanting receiver module not only transforms any existing or traditional switch into a 2-way module but also empowers you to wirelessly command your lights through kinetic switches, ensuring unparalleled convenience and flexibility. Boasting an impressive range of up to 20 meters indoors and 80 meters outdoors (subject to the number and thickness of walls in between), you can effortlessly manage your lights using the wireless kinetic switches (sold separately). The receiver’s sleek and robust design suits diverse lighting setups, and installation is a breeze, complete with safety features for worry-free operation. Elevate your lighting control to a new realm of sophistication.

Upgrade Your Switch to a 2-Way: Say goodbye to concerns about your traditional switch always being on for your wireless switch to function. Our innovative receiver module works like magic—whether your hard-wired switch is off or on, the kinetic switch effortlessly toggles it in the opposite direction and vice versa. Enjoy seamless control and eliminate worries about switch positions.

Easy Installation: The 500W RF Magic Receiver Module is easily wired between the light fixture and the power supply, enabling seamless integration with your lighting setup.

Energy-Efficient: The receiver is self-protected and fused with a maximum load of 5A, providing a durable and energy-efficient solution for your lighting control needs.

Ultra-Thin Design: With a slim profile, the remote-controlled light switch can be used under special conditions or even installed outdoors (inside a waterproof box) for added convenience.

Durable & Flexible Coding: Designed with ultra-low power consumption, the receiver can run up to 200,000 hours, offering a 20-year lifetime. It allows one switch to control multiple lights or multiple switches to control one light, offering versatile control options.

SpecificationValue
Power ModeKinetic Energy/Self Powered
Work Type86 Push Button Type
VoltageAC 100-250V
ColourWhite
Operating Temperature-20°C to 50°C
DistanceUp to 20m Indoor and 80m Outdoor
CommunicationRF 433MHz
WiFiNot Compatible
Product Size64mm x 32mm x 24mm
Weight35g
Warranty2 Years
  • 500W RF Receiver
  • User Manual (English)
£19.90EX VAT
Add to Cart

Ener-J Wifi Smart 2 Gang Touch Switch, No Neutral Needed, White Body

SKU: SHA5313

Wireless Remote Control your switch from anywhere, Works with Alexa & Google Home

£16.90EX VAT
Add to Cart

LIGHTCORE (2WAY)

SKU: LIGHTCORE-2WAY

LIGHTCORE (2WAY)

£46.90EX VAT
Add to Cart
£19.90EX VAT
Add to Cart
£13.90EX VAT
Add to Cart
£25.90EX VAT
Add to Cart
£19.90EX VAT
Add to Cart
£24.90EX VAT
Add to Cart
£18.90EX VAT
Add to Cart
£16.90EX VAT
Add to Cart
£10.90EX VAT
Add to Cart

Ener-J Dimmable + RF 1A Receiver

SKU: WS1079X

Features: 1.5A RF Receiver to be used with Our ECO-SERIES Wireless Kinetic Dimmable Switch. The receiver is simply wired between the light fixture and the power supply. Max Load 150W (including LEDs) Small receiver easily fits into wiring boxes has a built-in fuse & self-protected. Compatible with any lamps like…

£16.90EX VAT
Add to Cart

Ener-J Smart 400LED Colour Changing RGBIC Curtain Fairy Lights, 2Mx2M SHA5358

SKU: SHA5358

Create a stunning ambiance with the ENER-J’s Curtain Fairy Lights DIY Pattern. 4 Ways to control- manual, Remote Control, APP (from anywhere) and Voice Control. With RGBIC technology, each pixel light can be individually controlled, allowing for customizable color schemes and dynamic animations. Sync the lights with music, choose from…

£52.90EX VAT
Add to Cart

Ener-J Microwave Sensor for T380 T381

SKU: T381

Features: Simply remove the PC cover in the center of the light and plug in the Microwave sensor Different settings to control the sensor/Lights using LUX, sensor distance, timer, etc Can purchase a remote separately to control multiple sensors from one remote Technical Specifications: Power Supply: 12V-24V DC,>50mA Dim Control Output: 0-10V,max.25mA…

£18.90EX VAT
Add to Cart
Take full command of your ambiance and energy efficiency with these smart controls, allowing you to customize brightness and create the perfect atmosphere.