New Products

The Curved Edge range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M.

It is recommended that switches contrast with the front plate which in turn contrast with the wall. This range satisfies both recommendations. With a Light Reflectance Value (LRV) of approx. 8.9 (Part M recommends a contrast of 30% LRF between front plate and wall)

10AX DP switches are generally used when there are two circuits in a room i.e. a bathroom light and a Fan boost system

Benefits

• Wide Rocker Screwless Design
• Inherent Anti-microbial properties – 3rd party tested
• Certified to all relevant British Safety standards

Features

• 10AX rated
• 1G Double Pole

Gently contoured 9.5mm plate with rounded edges and anti-microbial properties.
An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.

• 10AX rated
• 1G Intermediate
• Wide Rocker Screwless Design
• Certified to EN 60669-1

Gently contoured 9.5mm plate with rounded edges and anti-microbial properties. 10AX DP switches are generally used when there are two circuits in a room i.e. a bathroom light and a Fan boost system

• 10AX rated
• 1G Double Pole
• Wide Rocker Screwless Design
• Certified to EN 60669-1

Gently contoured 9.5mm plate with rounded edges and anti-microbial properties

• 10AX rated
• 1G 2-way
• Wide Rocker Screwless Design
• Certified to EN 60669-1

Gently contoured 9.5mm plate with rounded edges and anti-microbial properties

• 10AX rated
• 2G 2-way
• Wide Rocker Screwless Design
• Certified to EN 60669-1

Gently contoured 9.5mm plate with rounded edges and anti-microbial properties

• 10AX rated
• 3G 2-way
• Wide Rocker Screwless Design
• Certified to EN 60669-1

Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties

• 230VAC 20VA
• IP41
• Single Voltage Shaver Socket
• Built in dual USB charger with Type-A and Type-C connections (5V DC 2.4A) (shared)
• Certified to EN 61558
• Minimum mounting box depth: 47mm

Outdoor twin power socket with power on/off indication that can be seen through the transparent lid.

• Manufactured from robust, high impact grade polycarbonate for a long life
• Black finish with a smoked black front casing for indicator visibility
• IP66 / IK06 rated
• Twin socket
• Dual USB A+C charging for convenience charging whilst outside
• Transparent user-friendly lid with large catch feature makes it simple and easy to open and close, Lid can hold open when required for ease of use. can also be padlocked for security
• Wider cable channels and casing will accommodate most plugs with thick over-moulded strain reliefs typically associated with outdoor products
• Multiple 20mm cable entries/exits allow for optimum positioning

*Meant for casual USB charging during BBQs etc. Not as a long term USB power supply unless appropriate IP rated USB cable is used and the bend radius is supported by the enclosure – a right angled USB connector head may be required

THIS PRODUCT IS NOT SUITABLE FOR EV CHARGING

IP68 weatherproof inline cable connectors with lever terminals for tool free installation. Ideal for repairing and extending. Suitable for outdoor and underwater fixtures.

• IP68 rated (@5bar)
• Max. 24A 250V/450V PTI 250, T85
• Manufactured from PA66, V-0, 960°C, PTI:250 with silicon sealing gasket.
• Silver-plated stainless-steel lever terminals.
• Min: 5mm cable diameter
• Max: 14mm cable diameter
• M22 size cable glands
• For use with H07RNF 3G 0.75mm2 – 2.5mm2 cable
• Operating Temperature: -30° C ~ 85° C
• Storage Temperature: -30° C ~ 85° C
• Barometric pressure: 86~106Kpa

Supplier prefilled with gel and includes set of sleeves and a 1 to 2 lever connector

• IP68 rated (@5bar)
• Max. 24A 250V/450V PTI 250, T85
• Manufactured from PA66, V-0, 960°C, PTI:250 with silicon sealing gasket.
• Supplied with a set of cable sleeves and a lever connector
• Min: 5mm cable diameter
• Max: 14mm cable diameter
• M22 size cable glands
• For use with H07RNF 3G 0.75mm2 – 2.5mm2 cable
• Operating Temperature: -30° C ~ 85° C
• Storage Temperature: -30° C ~ 85° C
• Barometric pressure: 86~106Kpa

Supplier prefilled with gel and includes set of sleeves and a 1 to 3 lever connector

• IP68 rated (@5bar)
• Max. 24A 250V/450V PTI 250, T85
• Manufactured from PA66, V-0, 960°C, PTI:250 with silicon sealing gasket.
• Supplied with a set of cable sleeves and a lever connector
• Min: 5mm cable diameter
• Max: 14mm cable diameter
• M22 size cable glands
• For use with H07RNF 3G 0.75mm2 – 2.5mm2 cable
• Operating Temperature: -30° C ~ 85° C
• Storage Temperature: -30° C ~ 85° C
• Barometric pressure: 86~106Kpa

Supplier prefilled with gel and includes set of sleeves and a lever connector

• IP68 rated (@5bar)
• Max. 24A 250V/450V PTI 250, T85
• Manufactured from PA66, V-0, 960°C, PTI:250 with silicon sealing gasket.
• Supplied with a set of cable sleeves and a lever connector
• Min: 5mm cable diameter
• Max: 14mm cable diameter
• M22 size cable glands
• For use with H07RNF 3G 0.75mm2 – 2.5mm2 cable
• Operating Temperature: -30° C ~ 85° C
• Storage Temperature: -30° C ~ 85° C
• Barometric pressure: 86~106Kpa

Mountable Plug and Play Power Hub. Plug and Socket style connection. Twist and lock action. Supplied with a set of sleeves
Terminals are suitable for rigid conductors or ferruled ends – simply push in by hand or if using flexible conductors – it requires holding button with screwdriver as you insert

• IP68 rated (@5bar)
• 24A 450V PTI 250, T85
• Manufactured from PA66, V-0, 960°C, PTI:250 with silicon sealing gasket.
• Silver-plated stainless-steel lever terminals.
• Min: 5mm cable diameter
• Max: 14mm cable diameter
• For use with H07RNF 3G 0.75mm2 – 2.5mm2 cable
• Operating Temperature: -30° C ~ 85° C
• Storage Temperature: -30° C ~ 85° C
• Barometric pressure: 86~106Kpa

A sleek power solution with USB charging. Can be mounted under cabinet keeping all your power requirements hidden and out of the way till needed.
This model has an elongated design projecting 93mm creating a wedge type look. Ideal for kitchens, utility rooms, hotels rooms, media walls or under any sort of cabinets where a power solution is needed

• 13A 230V
• 2G Switched Socket
• Dual USB Charger A+C (5V DC 4.0A shared) Max. 20W
• Stainless Steel finish with subtle grey inserts
• Size: W:211mm H:93mm D: 93mm

A sleek power solution with USB charging. Can be mounted under cabinet keeping all your power requirements hidden and out of the way till needed.
This model has an almost right angle design projecting 77mm creating a wedge type look. Ideal for kitchens, utility rooms, hotels rooms, media walls or under any sort of cabinets where a power solution is needed

• 13A 230V
• 2G Switched Socket
• Dual USB Charger A+C (5V DC 4.0A shared) Max. 20W
• Stainless Steel finish with subtle grey inserts
• Size: W:212mm H:77mm D: 77mm