Nittan
Base – use with EV Analogue detectors UB-6-EV
SKU: UB-6-EV
- Universal detector mounting base for use with Nittan Evolution detectors
- Complies to EN54-5 & 7
Hinged Clear Cover CI-NTN
SKU: CI-NTN
The Nittan CI-NTN clear Integral Cover fits directly onto the range of Nittan EV-MCP2 Call Points, including Waterproof options.
High Output Beacon EN54-23 White Flash EV-HIOP-BCN
SKU: EV-HIOP-BCN
The Nittan EV-HIOP-SB is a High Output Combined Sounder and Beacon unit which uses Nittan Evolution analogue addressable protocol.
This device has a red body and red lens.
Key Features
> IP65 rated
> Type B Indoor/Outdoor Beacon Without Isolator
> EEPROM Addressed (Programmer)
> FSK Signalling Protocol
> Beacon Rating W 2.4-7.5 / 135m3
Ceiling/Wall Mounted Sounder/Beacon EV-AV2
SKU: EV-AV2
The EV-AV2 provides a simple and highly flexible solution to meeting the DDA requirements by providing both sound and flashing light to alert occupants to a fire. This is the ceiling / wall mounted standalone variant.
Key Features
> Combined Sounder and Beacon
> Nittan Evolution FSK protocol
> EEPROM Addressed (Programmer)
> Stand alone device, not for use with Detector
Sounder/Beacon c/w integral Detector Base EV-AV2-Base-Sounder/Beacon
SKU: EV-AV2-Base-Sounder/Beacon
The EV-AV2 provides a simple and highly flexible solution to meeting the DDA requirements by providing both sound and flashing light to alert occupants to a fire. This Base version has a fully integrated detector base.
Key Features
> Combined Sounder and Beacon with Integral Base
> Nittan Evolution FSK protocol
> EEPROM Addressed (Programmer)
Sounder c/w integral Detector Base EV-SDR-Base-Sounder
SKU: EV-SDR-Base-Sounder
The EV-SDR Base is a low profile Sounder device, with fully integrated base suitable for ceiling mounting and use with all types of Evolution analogue addressable detectors. The device has 12 tone options (3 Approved), which are easily selectable via DIP switch settings. The EV-SDR Base can be set to “Activate with Detector”, in the Panel configuration, without any special device setting.
Key Features
* Addressable loop powered base sounder
* Nittan Evolution FSK protocol
* EEPROM Addressed (Programmer)
* 12 Tones DIP Switch Selected (3 Approved Tones)
* Replaces EV-ABS Sounder
Ceiling/Wall Mounted Sounder EV-SDR-Sounder
SKU: EV-SDR-Sounder
The EV-SDR is a low profile Sounder device suitable for both Ceiling or Wall mounting applications. The device has 12 tone options (3 Approved), which are easily selectable via DIP switch settings.
Key Features
> Nittan Evolution FSK Protocol
> EEPROM Addressed (Programmer)
> 12 Tones DIP Switch Selected (3 Approved Tones)
> Replaces EV-ABS Sounder
> Stand alone device, not for use with Detector
Reset Call Point (IP24) c/w Back Box and Wall Plate EV-MCP2-IP24
SKU: EV-MCP2-IP24
- STI “Reset” IP24 Housing
- IP24 Rated
- DIL Switched Addressed
- Includes Backbox and RF Wall Plate
- Replaces EV-MCP Reset Call Points
Rate Of Rise Heat Detector EV-H-A1R
SKU: EV-H-A1R
- Photoelectric detector
- Using Nittan Evolution FSK Protocol
- EEPROM addressed
- Low profile
- Operational voltage range from 20V to 35V
- Low monitoring current
- Omniview 360° LED (fire alarm indicator)
- Remote indicator output
- Base Control auxiliary output
- Non-polarised terminal
- Standard EN54-7:2000 + A1:2002
Single Loop Touch Screen Fire Alarm Panel Evolution1
SKU: Evolution1
- 4.3 inch touch screen
- Easy to use configuration software
- Full cause and effect programming at Panel or PC Configuration tool
- Up to 254 devices on the loop
- 254 zones available
- Network Card built in for networking up to 16 panels
- Remote Access via the “Nittan Portal” (Future Development)
- 2 x configurable RS485 ports
- Up to 8 password protected users
- Switch mode power supply
- EN 54 part 2 and part 4
Photoelectric Optical Detector c/w In-Built Sounder (EV-PS Replacement) EV-PYS
SKU: EV-PYS
The EV-PYS sensor drives and controls the EV-PYSVAD VAD Beacon Base, with the entire platform only taking one address for maximum system efficiency. This clever design makes for quick and simple installation, saving both time and money, whilst remaining extremely competitively priced. It also makes for a more aesthetically pleasing appearance, with a lower profile for an unobtrusive appearance.
Key Features
> Optical Detector with built in Sounder
> Sounder output ~ 88dB(A) @ ~ 3.5mA
> Omniview 360° LED
> Drive Output for dedicated EV-PYSVAD beacon base
> Evolution FSK protocol
> EEPROM Addressed (Programmer)
> Approved to EN54-3:2001 + A1:2002 + A2:2006 & EN54-7:2000 + A1:2002 + A2:2006
Multisensor Photoelectric Optical & A1R Heat Multi-Sensor EV-PH
SKU: EV-PH
The EV-PH is a combined Optical Smoke and Heat Detector in one unit. This advanced Multi Sensor is able to combine the benefits of both optical and heat sensing technologies making it less prone to false alarms than individual sensing devices.
An innovative Nittan designed algorithm reads both signals simultaneously and generates alarm signals from either (or both) sensor(s).
Key Features
> Optical Smoke and 54°C (A1R) Heat Sensors in one housing
> Omniview 360° LED
> Nittan Evolution FSK protocol
> EEPROM Addressed (Programmer)
> RIL and Base Control Outputs
> EN54-5 & EN54-7 Compliant
Photoelectric Optical Detector EV-P
SKU: EV-P
- Photoelectric detector
- Using Nittan Evolution FSK Protocol
- EEPROM addressed
- Low profile
- Operational voltage range from 20V to 35V
- Low monitoring current
- Omniview 360° LED (fire alarm indicator)
- Remote indicator output
- Base Control auxiliary output
- Non-polarised terminal
- Standard EN54-7:2000 + A1:2002
High Output Sounder Beacon EN54-23 White Flash EV-HIOP-SB
SKU: EV-HIOP-SB
IP65 rated as standard, the EV-HIOP-SB is an extremely cost effective Type B outdoor wall mounted Sounder / Beacon (VAD) and is available in Versions with and without Short Circuit Isolator. It comes with 32 alarm tones (3 Approved) to choose from and individually controlled alarm and alert tones, allowing customers to choose a combination that works for any installation. It is EEPROM Addressed (Programmer) and features FSK signalling protocol for robust, reliable communications.
Key Features
> IP65 rated
> 32 Tones DIP Switch Selected (3 Approved Tones)
> EEPROM Addressed (Programmer)
> FSK Signalling Protocol
> Beacon Rating W 2.4-5.5 / 73m3
Three Input – Three Output module (Loop Powered), c/w -ve SCI and 1x mains rated output EV-3IO
SKU: EV-3IO
The Nittan EV-3IO is a Triple Input / Output module, with integral –ve line Short circuit isolator compatible with Evolution analogue addressable system devices.
The Module includes setting options for a normally closed contact input and Fail Safe mode for Door release requirement.
LEDs are provided to Indicate Input & Output active, Fault and Isolator Open. Remote LED outputs are provided Relay status, Fault and Isolator Open indication.
Device address may be set using EV-AD2-EXT Hand held programmer.
The Short Circuit Isolator will protect the system, whilst allowing the device to continue communication from the opposite side. The isolator will self-reset when the fault clears.
Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model.
It is not possible to mix +ve and -ve isolator styles on a system.
The following resistors are required for Fault and Alarm monitoring:
EOL = 10k Ohm
Alarm = 470 / 680 Ohm
Key Features
> Loop Powered
> 3 x Class B Inputs
> 1 x 5A@240Vac Rated Relay
> 2 x 1A@30Vdc Rated Relay
> Integral -ve Isolater
> Failsafe option for Door Release
> EEPROM Addressed (Programmer)
Two Input, One Output Module (Loop Powered), c/w -ve SCI and mains rated output EV-2I1O
SKU: EV-2I1O
The Nittan EV-2I1O is a Dual Input, Single Output module, with integral –ve line Short circuit isolator compatible with Evolution analogue addressable system devices.
The Short Circuit Isolator will protect the system, whilst allowing the device to continue communication from the opposite side. The isolator will self-reset when the fault clears.
Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model.
It is not possible to mix +ve and -ve isolator styles on a system.
The following resistors are required for Fault and Alarm monitoring:
EOL = 10k Ohm
Alarm = 470 / 680 Ohm
Key Features
> Loop Powered
> 2 x Class B Inputs
> 5A@240Vac Rated Relay
> Integral -ve Isolator
> Failsafe option for Door Release
> EEPROM Addressed (Programmer)
> Housing fits standard UK 2 Gang pattress box
Best sellers...
