RGL
Surface Back Box PBB02/BK
SKU: PBB02/BK
- 28mm back box
- Allows for conduit entry
- Available in green or black
- Suitable for stainless steel plate (85×85 (mm)
25mm IP65 stainless steel button WP-EBSS25/PTE
SKU: WP-EBSS25/PTE
- Stainless steel button
- Momentary operation
- High impact plastic back box
- Can be surface or flush fitting
- Easy clean surface. Ideal for general/sensitive areas
- Screw footprint for flush fitting onto standard back box
- Complete with gasket and gland.
Standard IR Touch Free Exit Device WP-EBNT/TF-1
SKU: WP-EBNT/TF-1
- ‘Touch Free’ sensor button
- Illumination Green to Red
- High impact plastic back box
- Easy clean surface
- Ideal for general/sensitive areas
- Gasket and gland included
Weatherproof Green Dome Button WP-EBGBWC02/PTO
SKU: WP-EBGBWC02/PTO
- All plastic large green button.
- Momentary operation.
- High impact plastic back box.
- Can be surface or flush fitting.
- Easy clean surface. Ideal for general/sensitive areas.
- Gasket and gland included
Weatherproof Green Dome Button WP-EBGBWC02/PTE
SKU: WP-EBGBWC02/PTE
- All plastic large green button.
- Momentary operation.
- High impact plastic back box.
- Can be surface or flush fitting.
- Easy clean surface. Ideal for general/sensitive areas.
- Gasket and gland included
Solenoid Bolt SB-235
SKU: SB-235
- Operating voltage – 12VDC
- Standby current – 100mA
- Operating current – 150mA
- Initial Surge – 1.4Amps
- Power to Lock
- Holding force 1000K
- Fail-safe operation
- Delay timer (0/3/6) seconds
- Locking by detector plate
- Monitored output for door status
- Suitable for wooden doors
- Concealed when fitted flush
Shrouded Back Box PBBSHR-W
SKU: PBBSHR-W
- 40mm shrouded back box
- Allows for conduit entry
- Use for all standard products where a deeper box maybe required
- Available in green, black or white
- Suitable for stainless steel plate (85×85 (mm))
Shrouded Back Box PBBSHR-GN
SKU: PBBSHR-GN
- 40mm shrouded back box
- Allows for conduit entry
- Use for all standard products where a deeper box maybe required
- Available in green, black or white
- Suitable for stainless steel plate (85×85 (mm))
Shrouded Back Box PBBSHR/BK
SKU: PBBSHR/BK
- 40mm shrouded back box
- Allows for conduit entry
- Use for all standard products where a deeper box maybe required
- Available in green or black
- Suitable for stainless steel plate (85×85 (mm))
Surface Back Box PBB05/GN
SKU: PBB05/GN
- 40mm back box
- Allows for conduit entry
- Available in green or black
- Suitable for stainless steel plate (85×85 (mm))
Surface Back Box PBB02/GN
SKU: PBB02/GN
- 28mm back box
- Allows for conduit entry
- Available in green or black
- Suitable for stainless steel plate (85×85 (mm))
Best sellers...
