Vanderbilt
ACT 125kHz Tag (10pcs) EM10T3
ACT 125kHz Tag (10pcs)
| Frequency: | 125kHz |
| Delivery unit: | 10 |
| Card technology: | Proximity |
ACT Mifare Tag (10pcs) MF10T1
MIFARE Classic 1K Fob with number encoded in the Sector
| Frequency: | 13.56MHz |
ACT 125kHz Clamshell (10pcs) EM10C4
ACT 125kHz Clamshell (10pcs)
| Dimensions (W x H x D): | 54 x 86 x 3 mm |
| Weight: | 0.95 KG |
| Frequency: | 125kHz |
| Delivery unit: | 10 |
| Card technology: | Proximity |
| Material: | ABS |
| Colour: | White |
ACTpro Prox 125kHz Reader EM1040e
Multiformat readers that can support all ACT 125KHz RFID cards and fobs including existing HID-compatible tokens.
| Weight: | 0.130kg |
| Connectors: | Connector Blocks |
| Operating voltage: | 5 – 12 Volts DC |
| Current consumption: | 40mA |
| Mounting: | Surface / flush |
| Installation: | Indoor / outdoor |
| Dimensions (L x W x H): | 94mm x 130mm x 25mm |
| Operating temperature: | -40°C to +70°C |
| Housing protection: | IP65 |
| Impact rating: | IK10 |
ACTpro Prox 125kHz Mullion Reader EM1030e
Multiformat readers that can support all ACT 125KHz RFID cards and fobs including existing HID-compatible tokens.
| Dimensions (L x W x H): | 120mm x 37mm x 15 mm |
| Connectors: | 2m Pigtail lead |
| Operating voltage: | 5 – 12 Volts DC |
| Current consumption: | 40mA |
| Impact rating: | IK08 |
| Mounting: | Surface / flush |
| Installation: | Indoor / outdoor |
| Operating temperature: | -40°C to +70°C |
| Housing protection: | IP66 |
| Weight: | 0.189kg |
ACTpro MIFARE Reader panel MF1030PM
Proximity only panel mount reader, reads sector data from ACT MIFARE cards/fobs also can read the serial number from any MIFARE Classic card/fob or data from any sector (read key required)
| Dimensions (L x W x H): | 63 x 58 x 23 (mm) |
| Operating temperature: | -40°C ~ +70°C |
| Impact rating: | IK08 |
| Mounting: | Panel |
| Connectors: | Connector Block |
| Outputs: | Selectable Clock & Data or Wiegand Output |
| Installation: | Indoor & Outdoor |
| Compatibility: | MIFARE ISO 14443A Compatible |
| Operating voltage: | 12 – 24 Volt DC |
| Keypad: | No |
| Weight: | 0.065 kg |
ACTpro 8 Input/8 Output module ACT-IOM
Each Input/Output Module supports 8 inputs and 8 outputs per device. Each ACTpro controller supports up to 4 IO Modules (32 inputs and 32 outputs) The IO Module allows an ACTpro controller to be used in applications where signaling to other equipment is required. Example of this is elevator controls, alarm systems, CCTV, switching applications, IO Mapping.
| Power consumption: | 300 mA |
| Operating temperature: | -10 ~ +50 °C |
| Installation: | Surface (Indoor) |
| Dimensions (L x W x H): | 110 x 190 x 60 (mm) |
| Operating voltage: | 12 VDC |
| Weight: | 0.375 kg |
Vandal-proof Cover for MF/EV1030e MF-VR
Stainless steel vandal resistant cover for ACTpro 1030 readers (MF1030, EV11030, EM1030)
ACTpro MIFARE Card (10pcs) MF10C1
MIFARE Classic 1K Cards with number encoded in the Sector
| Colour: | White |
| Dimensions (W x H x D): | 54 x 86 x 0.76 mm |
| Frequency: | 13.56MHz |
| Delivery unit: | 10 |
| Weight: | 0.059 kg |
| Material: | PVC |
ACTpro MIFARE Reader with Keypad MF1050e
Combined proximity and PIN reader, reads sector data from ACT MIFARE cards/fobs also can read the serial number from any MIFARE Classic card/fob or data from any sector (read key required)
| Impact rating: | IK08 |
| Weight: | 155g |
| Dimensions (L x W x H): | 95mm x 128mm x 21mm |
| Mounting: | Surface/Flush |
| Connectors: | Connector Block |
| Outputs: | Selectable Clock & Data or Wiegand Output |
| Installation: | Indoor & Outdoor |
| Compatibility: | MIFARE ISO 14443A Compatible |
| Operating voltage: | 12 – 24 Volt DC |
| Keypad: | Yes |
| Operating temperature: | -40°C to +70°C |
| Housing protection: | IP67 |
ACTpro MIFARE Reader MF1040e
MIFARE card technology is widely used for access control, cashless vending, smart printing/copying, transportation and stadium ticketing, etc. ACT MIFARE readers can read ACT MIFARE cards/fobs and the serial number from any MIFARE Classic card/fob or data from any sector (read key required).
| Impact rating: | IK08 |
| Weight: | 142g |
| Mounting: | Surface/Flush |
| Connectors: | Connector Block |
| Outputs: | Selectable Clock & Data or Wiegand Output |
| Installation: | Indoor & Outdoor |
| Compatibility: | MIFARE ISO 14443A Compatible |
| Dimensions (L x W x H): | 95mm x 128mm x 19mm |
| Operating voltage: | 12 – 24 Volt DC |
| Operating temperature: | -40°C to +70°C |
| Keypad: | No |
| Housing protection: | IP67 |
ACTpro MIFARE Mullion Reader MF1030e
Proximity only reader, reads sector data from ACT MIFARE cards/fobs also can read the serial number from any MIFARE Classic card/fob or data from any sector (read key required.
| Operating voltage: | 12 – 24 VDC |
| Dimensions (L x W x H): | 120 x 37 x 15 (mm) |
| Operating temperature: | -40°C ~ +70°C |
| Impact rating: | IK10 |
| Outputs: | Selectable Clock & Data or Wiegand Output |
| Mounting: | Mullion |
| Installation: | Indoor & Outdoor |
| Connectors: | NO (3m Pigtail lead) |
| Compatibility: | MIFARE ISO 14443A Compatible |
| Keypad: | No |
| Housing protection: | IP66 |
| Weight: | 0.150 kg |
ACTpro Prox 125 Reader with Keypad EM1050e
Multiformat PIN and Proiximity readers that can support all ACT 125KHz RFID cards and fobs including existing HID-compatible tokens.
| Operating voltage: | 5 – 12 Volts DC |
| Current consumption: | 40mA |
| Impact rating: | IK08 |
| Weight: | 0.225kg |
| Mounting: | Surface / flush |
| Installation: | Indoor / outdoor |
| Dimensions (L x W x H): | 94mm x 130mm x 25mm |
| Operating temperature: | -40°C to +70°C |
| Housing protection: | IP55 |
| Connectors: | Connector Blocks |
ACTpro MF/EM Enrollment Reader ACT-USB
The ACTpro USB reader is a plug and play desktop reader for ACt Enterprise software. The USB readers support ACT RFID, HID, MIFARE Classic and DESFire EV1 technologies.
| Power supply: | Supplied from USB port – 5V DC |
| Indicators: | 3x LEDs (red, green, amber) |
| Current consumption: | <100mA |
| Card technology: | MIFARE Classic, MIFARE Plus, MIFARE DESFire EV1, ACT-RFID (125kHz) and HID 125kHz |
| Cable length: | 1.5m |
| Buzzer: | Yes |
| Additional components: | USB enrolment reader requires ACT Enterprise version 1.3.0.6 or later |
| Dimensions (L x W x H): | 116 x 67 x 14 (mm) |
Door Controller, 2A 12V DC ACTpro-1520
- ACTpro 1500 Controller is not interoperable with other ACTpro controllers
- Controls up to 32 doors
- 15,000 users (2 credentials per user) and 250 User Groups
- If using more than one 1500 controller ACTWin software is required
- ACTpro 1500 controller includes a web server which allows installers and users to manage installations without requiring ACTWin software
- ACTpro 1500 is a single door IP controller which can be expanded to 32 doors with ACTpro 100e door stations
Door Station, 2A 12V DC PSU ACTpro-120
Door Station
The ACTpro-120 facilitates the expansion of an additional door on the ACTpro controller (ACTpro-1500 and ACTpro-1520). The ACTpro-120 includes a 2A 12V DC PSU and is connected to the ACTpro controller via RS485. The decision to grant or deny access is made by the ACTpro Controller.
Door Station ACTpro-100
Door Station
The ACTpro-100 facilitates the expansion of an additional door on the ACTpro controller (ACTpro-1500 and ACTpro-1520) and connects to the ACTpro controller via RS485. The decision to grant or deny access is made by the ACTpro Controller.
Best sellers...
