XFP Network card for 32 zone panels AFP711
- Can be used to connect up to 8 XFP main panels (any mix) over a two-wire RS485 network of up to 1KM in length.
- Each networked XFP can be programmed to accept Fires, Faults and Control actions such as Silence Alarm Sounders and Control Panel Resets from other panels.
- Each XFP will accept Disablement commands for zones, sounders and output sets from other panels.
- All panels monitored for network wiring faults.
- Fires and faults on remote panels are displayed on local panels including the point description.
- C&Es can be programmed into local panels dependent on which remote panel is in alarm.
- The network supports the programming of site data into remote panels from a PC at a local panel.
- Time and date is common to all panels.
- All networked main panels require a network communication card.
- It is not possible to mix XFP main panels and XFP repeaters on the same network.
£99.90EX VAT
You may also like:
24 PORT GIGABIT SFP, 8 COMBO RJ45 PORTS, L2 MANAGED SWITCH RG-NBS3200-24SFP/8GT4XS
48 PORT GIGABIT L2 CLOUD MANAGED POE SWITCH, 4 10G UPLINK RG-NBS3200-48GT4XS-P
28 PORT GIGABIT L2 CLOUD MANAGED POE SWITCH RG-NBS3100-24GT4SFP-P
Wi-Fi 6 AX6000 High-density Multi-G Ceiling Access Point RG-RAP2260-H
28 PORT GIGABIT L2 CLOUD MANAGED POE SWITCH RG-NBS3100-24GT4SFP-P
C-Tec AFP711 CFP / XFP Network Communications Card
An optional system expansion device for use with XFP 1/2 Loop 32 Zone fire panels. Allows the connection of up to eight XFP Repeaters or eight XFP Main panels (any mix) on an RS485 network. One AFP711 card required per networked Main XFP 1/2 Loop 32 Zone panel (note that XFP510-16 and XFP510-32 repeaters include a network driver card as standard).
The AFP711 is NOT compatible with XFP Single Loop 16 Zone panels which require a CFP761 card for networking.
Key network protocol features when used for interconnecting XFP main panels:
- Can be used to connect up to 8 XFP main panels (any mix) over a two-wire RS485 network of up to 1KM in length.
- Each networked XFP can be programmed to accept Fires, Faults and Control actions such as Silence Alarm Sounders and Control Panel Resets from other panels.
- Each XFP will accept Disablement commands for zones, sounders and output sets from other panels.
- All panels monitored for network wiring faults.
- Fires and faults on remote panels are displayed on local panels including the point description.
- C&Es can be programmed into local panels dependent on which remote panel is in alarm.
- The network supports the programming of site data into remote panels from a PC at a local panel.
- Time and date is common to all panels.
- All networked main panels require a network communication card.
- It is not possible to mix XFP main panels and XFP repeaters on the same network.
| Brand |
|---|
We are pleased to offer Standard UK Mainland delivery on all orders.
Please note that Next Day Delivery is available only for items that are currently in stock.
When ordering a West Midland Electrics product, you will find the available delivery options listed below. During the order and checkout process, you can select your preferred option. Our standard delivery schedule is Monday to Friday, 9:00am - 5:00pm. However, it's worth noting that some couriers may deliver slightly earlier or later.
For products that are out of stock or custom made, the delivery time can be up to 4 weeks. We will ensure to keep you updated about the status of your order via email or phone.
If you place an order with multiple items that have different dispatch times, we may consolidate the shipment, so that the products arrive together. However, if there is any delay, we will promptly notify you through email and/or phone.
Please be aware that delivery to certain remote rural areas may take longer than our usual timescales. While we strive to provide efficient delivery service to all our customers, we cannot guarantee the exact timeframe for such locations.
UNITED KINGDOM | Delivery 3-5 working days, subject to stock availability | Delivery Charge (EX VAT) |
England, Wales & Southern Scotland | 3-5 working days | £9.99 (ex VAT) |
| Northern Ireland | *Free delivery not available | £29.99 (ex VAT) |
| Ireland | *Free delivery not available | £19.99 (ex VAT) |
| ENGLAND restrictions apply* | Delivery 3-5 working days | Delivery Charge (ex VAT) |
| Isle of Man | *Free delivery not available | £24.90 (ex VAT) |
| Isle of Wight | *Free delivery not available | £24.90 (ex VAT) |
| Channel Islands | *Free delivery not available | £24.90 (ex VAT) |
| EU Countries | Price On Application | (Email/Call Us) |
| Rest Of World | Price On Application | (Email/Call Us) |
IMPORTANT – Good supplied as ordered and returned for credit must be accompanied by an Invoice Number. We reserve the right to retain such sums as equal to the value by which the goods have diminished as a result of handling by you, the consumer, beyond what is necessary to establish the nature, characteristics and functioning of the goods. You will be liable for the cost of return of goods and costs of services provided during the cancellation period, or deduction for use. Special orders cannot be returned for credit or exchange
1. FAULTY PRODUCTS
a) Products that are faulty must be returned within the manufacturers' warranty period which is usually 12 months.
b) The complete product must be returned unless, if agreed by the Company, a specific part may be returned.
c) Products within the manufacturers' specific warranty period will be repaired, replaced, or a refund given at the discretion of the Company.
West Midland Electrics does not accept liability for indirect or consequential loss.
2. NON-FAULTY GOODS
a) Products must be complete and in their original packaging with any instruction leaflets.
b) Products must be returned within 28 days of receipt.
c) Refunds for any products not required are at the discretion of the Company.
d) Non-standard products that have been ordered specially cannot be refunded under any circumstances.
e) Customers are responsible for covering the cost of and arranging returns of non faulty goods.
f) Handling charges apply to all home lighting products.
3. PROCEDURE FOR RETURNING FAULTY PRODUCTS TO West Midland Electrics (or requesting a replacement).
Please contact the branch that supplied the goods and have ready the following information:
a) The invoice number
b) The date of purchase
c) The product code(s)
d) The reason for returning the products
You will be advised of how the products will be exchanged or of the issue of a refund.
4. SHORT OR NON-DELIVERY
If you experience a short or non delivery, please contact the branch that supplied the goods and have ready the following information:
a) The invoice number
b) The date of purchase
c) The product code(s)
Our sales advisers will investigate the problem and refer back to you as soon as possible.
