Back Boxes
Knightsbridge 3G 47mm Single Plus Double Galvanised Steel Box GSK347D
3G 47mm Single Plus Double Galvanised Steel Box
Surface Back Box PBB02/BK
- 28mm back box
- Allows for conduit entry
- Available in green or black
- Suitable for stainless steel plate (85×85 (mm)
Knightsbridge 2G 47mm Galvanised Steel Box GSK247
Galvanized steel construction 1mm thickness (+/- 1%)
– 47mm depth
– One fixed mounting lug and one adjustable mounting lug
– With earth terminal
– With mix of 20mm and 25mm knockouts
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
Knightsbridge 1G 47mm Galvanised Steel Box GSK47
Galvanized steel construction 1mm thickness (+/- 1%)
– 47mm depth
– One fixed mounting lug and one adjustable mounting lug
– With earth terminal
– With 20mm and 25mm knock outs
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
Knightsbridge Curved Edge Double 47mm Pattress Box with Earth Terminal and Cable Strain Relief CU1600
Rounded edge for use with the Knightsbridge Curved Edge (CU) series of wiring accessories.
– Double size
– 47mm
– With earth terminal
– With cable strain relief
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge 6-8G 35mm galvanised steel box GDSG68G
35mm deep steel galvanized back box for flush mounting. Suitable for mounting 6-8G grid faceplates and modules. For use with 6-8G grid mounting frames and 6G and 8G faceplates. Flat Plate and Screwless options.
Knightsbridge 1G 16mm Galvanised Steel Box GSK16
Galvanized steel construction 1mm thickness (+/- 1%)
– 16mm depth
– One fixed mounting lug and one adjustable mounting lug
– With earth terminal
– With oval knock outs on side and rear
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
Shrouded Back Box PBBSHR-W
- 40mm shrouded back box
- Allows for conduit entry
- Use for all standard products where a deeper box maybe required
- Available in green, black or white
- Suitable for stainless steel plate (85×85 (mm))
Shrouded Back Box PBBSHR-GN
- 40mm shrouded back box
- Allows for conduit entry
- Use for all standard products where a deeper box maybe required
- Available in green, black or white
- Suitable for stainless steel plate (85×85 (mm))
Shrouded Back Box PBBSHR/BK
- 40mm shrouded back box
- Allows for conduit entry
- Use for all standard products where a deeper box maybe required
- Available in green or black
- Suitable for stainless steel plate (85×85 (mm))
Surface Back Box PBB02/GN
- 28mm back box
- Allows for conduit entry
- Available in green or black
- Suitable for stainless steel plate (85×85 (mm))
Knightsbridge 1G Surface Box – Black 1GSBBK
Suitable for use with 1G Screwless and Flat Plate products from the Knightsbridge Ranges
– 32mm deep
Knightsbridge 2G 25mm Galvanised Steel Extension Box GSE225
25mm depth with one adjustable lug and multiple 20mm knock outs. Used to extend standard flush wall boxes that have been sunk in too deep or to accommodate deeper wiring accessories. Manufactured from 1.0mm² thick steel (+/- 1-2%)
Knightsbridge Metal Clad 2G Back Box M8900
Heavy duty metal clad design. Durable powder coated surface.
– Empty metalclad rear box
– Supplied in Knightsbridge polybag
Knightsbridge Dual 25mm Pattress Box with Earth Terminal SN1510
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Dual single
– 25mm
– With earth terminals
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Curved Edge Double 35mm Pattress Box with Earth Terminal CU1800
Rounded edge for use with the Knightsbridge Curved Edge (CU) series of wiring accessories.
– Double size
– 35mm
– With earth terminal
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Double 35mm Pattress Box with Earth Terminal SN1800
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Double size
– 35mm
– With earth terminal
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Curved Edge Single 35mm Pattress Box with Earth Terminal CU1700
Rounded edge for use with the Knightsbridge Curved Edge (CU) series of wiring accessories.
– Single size
– 35mm
– With earth terminal
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Single 35mm Pattress Box with Earth Terminal SN1700
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Single size
– 35mm
– With earth terminal
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Curved Edge Double 25mm Pattress Box CU1500
Rounded edge for use with the Knightsbridge Curved Edge (CU) series of wiring accessories.
– Double size
– 25mm
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Double 25mm Pattress Box SN1500
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Double size
– 25mm
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Curved Edge Single 47mm Pattress Box with Earth Terminal and Cable Strain Relief CU1610
Rounded edge for use with the Knightsbridge Curved Edge (CU) series of wiring accessories.
– Single size
– 47mm
– With earth terminal
– With cable strain relief
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Curved Edge Single 16mm Pattress Box with Earth Terminal CU1300
Rounded edge for use with the Knightsbridge Curved Edge (CU) series of wiring accessories.
– Single size
– 16mm
– With earth terminal
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge 2G 35mm Dual Galvanised Steel Box GSK235D
2G 35mm Dual Galvanised Steel Box
Knightsbridge 1G Surface Box – Polished Chrome effect 1GSBPC
1G Surface Box – Polished Chrome effect
Knightsbridge 1G Surface Box – Brushed Chrome effect 1GSBBC
1G Surface Box – Brushed Chrome effect
Knightsbridge 1G 25mm Galvanised Steel Extension Box GSE25
1G 25mm Galvanised Steel Extension Box
Knightsbridge 47mm Galvanised Steel Box for Small Combination Multimedia Plate GSK194MM
47mm Galvanised Steel Box for Small Combination Multimedia Plate
Knightsbridge 47mm Galvanised Steel Box for Combination Multimedia Plate GSK298MM
Designed for use with xx298xxx – Multimedia Combination Plates. Galvanized steel construction 1mm thickness (+/- 1%)
– 4 x 2G 47mm depth boxes on a rear back plate
Each 47mm back box has:
– One fixed mounting lug and one adjustable mounting lug
– With earth terminal
– With mix of 20mm and 25mm knockouts
– Manufactured to EN 60670
Knightsbridge 2G 25mm Galvanised Steel Box GSK225
Galvanized steel construction 1mm thickness (+/- 1%)
– 25mm depth
– One fixed mounting lug and one adjustable mounting lug
– With earth terminal
– With 20mm knock outs on sides and rear
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
Knightsbridge 1G Surface Box – Grey 1GSBGY
Suitable for use with 1G Screwless and Flat Plate products from the Knightsbridge Ranges
– 32mm deep
Knightsbridge 1G Surface Box – White 1GSBW
Suitable for use with 1G Screwless and Flat Plate products from the Knightsbridge Ranges
– 32mm deep
Knightsbridge 3G 35mm Single Plus Double Galvanised Steel Box GSK335D
For mounting two wiring accessory plates side by side. In this case a 1G + 2G.
Galvanized steel construction 1mm thickness (+/- 1%)
– 35mm depth
– 4 fixed mounting lugs
– With earth terminals
– With 20mm knockouts
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
NB: Suitable for use with standard size 86 x 86 and 86 x 146 plates only
Knightsbridge 3G 35mm Triple Galvanised Steel Box GSK335
For mounting three wiring accessory plates side by side. In this case a 1G + 1G +1G.
Galvanized steel construction 1mm thickness (+/- 1%)
– 35mm depth
– 6 fixed mounting lugs
– With earth terminals
– With 20mm knockouts
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
NB: Suitable for use with standard size 86 x 86 plates only
Knightsbridge 2G 35mm Galvanised Steel Box GSK235
Galvanized steel construction 1mm thickness (+/- 1%)
– 35mm depth
– One fixed mounting lug and one adjustable mounting lug
– With earth terminal
– With mix of 20mm and 25mm knockouts
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
Knightsbridge 1G 35mm Galvanised Steel Box GSK35
Galvanized steel construction 1mm thickness (+/- 1%)
– 35mm depth
– One fixed mounting lug and one adjustable mounting lug
– With earth terminal
– With 20mm knock outs on sides and rear
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
Knightsbridge 1G 27mm Architrave Galvanised Steel Box GSK27
Galvanized steel construction 1mm thickness (+/- 1%)
– Architrave type
– 27mm depth
– With earth terminal
– With 16mm knock outs on top and bottom
– Manufactured to EN 60670
– Supplied bulk packed in shrink wrapped Knightsbridge trays
Knightsbridge Metalclad 9-12G surface mount box GDSG912M
Surface mount, metalclad back box suitable for mounting 9-12G grid faceplates and modules. For use with GDF004F – 9-12G grid mounting frame and GDFP009M/GDFP0012M – 9G and128G metalclad faceplates.
Knightsbridge Metalclad 6-8G surface mount box GDSG68M
Surface mount, metalclad back box suitable for mounting 6-8G grid faceplates and modules. For use with GDF003F – 6-8G grid mounting frame and GDFP006M/GDFP008M – 6G and 8G metalclad faceplates.
Knightsbridge Metal Clad 1G Back Box M8700
Heavy duty metal clad design. Durable powder coated surface.
– Empty metalclad rear box
– Supplied in Knightsbridge polybag
Knightsbridge Double 47mm Pattress Box with Earth Terminal SN1600
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Double size
– 47mm
– With earth terminal
– With cable strain relief
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge 35mm Single + Double Dry Lining Box SN8335D
White, plastic dry lining box. For mounting electrics into dry-lined cavity walls.
– 35mm
– 2 x 20mm knock out at rear
– Cable entry channels top and bottom
– Certified to BS 5733
– Supplied in shrink-sealed Knightsbridge multipacks
Knightsbridge 47mm Double Dry Lining Box SN8382
White, plastic dry lining box. For mounting electrics into dry-lined cavity walls.
– 47mm
– 20mm knock out at rear
– Cable entry channels top and bottom
– Certified to BS 5733
– Supplied in shrink-sealed Knightsbridge multipacks
Knightsbridge 35mm Dual Dry Lining Box SN8380D
White, plastic dry lining box. For mounting electrics into dry-lined cavity walls.
– 35mm
– 2 x 20mm knock out at rear
– Cable entry channels top and bottom
– Certified to BS 5733
– Supplied in shrink-sealed Knightsbridge multipacks
Knightsbridge Single 47mm Pattress Box with Earth Terminal SN1610
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Single size
– 47mm
– With earth terminal
– With cable strain relief
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge 35mm Double Dry Lining Box SN8380
White, plastic dry lining box. For mounting electrics into dry-lined cavity walls.
– 35mm
– 20mm knock out at rear
– Cable entry channels top and bottom
– Certified to BS 5733
– Supplied in shrink-sealed Knightsbridge multipacks
Knightsbridge 47mm Single Dry Lining Box SN8381
White, plastic dry lining box. For mounting electrics into dry-lined cavity walls.
– 47mm
– 20mm knock out at rear
– Cable entry channels top and bottom
– Certified to BS 5733
– Supplied in shrink-sealed Knightsbridge multipacks
Knightsbridge Single 16mm Pattress Box with Earth Terminal SN1300
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Single size
– 16mm
– With earth terminal
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge 34mm Round Dry Lining Box SN8375
White, plastic dry lining box. For mounting electrics into dry-lined cavity ceilings.
– 34mm
– 2 x 20mm knock out at rear
– Certified to BS 5733
– Supplied in shrink-sealed Knightsbridge multipacks
Knightsbridge 35mm Single Dry Lining Box SN8370
White, plastic dry lining box. For mounting electrics into dry-lined cavity walls.
– 35mm
– 20mm knock out at rear
– Cable entry channels top and bottom
– Certified to BS 5733
– Supplied in shrink-sealed Knightsbridge multipacks
Knightsbridge 9-12G 35mm galvanized steel box GDSG912G
35mm deep steel galvanized back box for flush mounting. Suitable for mounting 6-8G grid faceplates and modules. For use with 9-12G grid mounting frames and 9G and 12G faceplates. Flat Plate and Screwless options.
Knightsbridge Curved Edge Single 25mm Pattress Box CU1400
Rounded edge for use with the Knightsbridge Curved Edge (CU) series of wiring accessories.
– Single size
– 25mm
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Single 25mm Pattress Box SN1400
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Single size
– 25mm
– Supplied bulk packed in Knightsbridge inner cartons
Best sellers...
