Beacons & Sounders
ESP White Banshee Excel Sounder (87-112 Dba) BA-2W
- Sound Output @ 1m 89 – 110 dBA
- Current – 3-39 mA
- IP Rating – IP45
Hochiki CHQ-WSB2/WL Hochiki-CHQ-WSB2/WL
Model CHQ-WSB2/WL is an EN54-23 compliant addressable loop powered Wall Sounder Beacon innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption. The unit features an integral beacon within the horn utilising high intensity LED technology and is designed to fit to the Standard Base (YBO-R/3(RED)) or the Isolator Base (YBO-R/SCI(RED)). The sounder is IP rated to IP21 for internal use but it can be made weatherproof by utilising the WS2-WPK Weatherproof Kit, which consists of a specialised back box and gasket set.
Also incorporates an auto shutdown mode* which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.
*Dependent on control panel compatibility.
Hochiki CHQ-WS2 Hochiki-CHQ-WS2
Model CHQ-WS2 is an addressable loop powered Wall Sounder innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBO-R/3(RED)) or the Isolator Base (YBO-R/SCI(RED)). The sounder is IP rated to IP21 for internal use but it can be made weatherproof by utilising the WS2-WPK Weatherproof Kit, which consists of a specialised back box and gasket set.
Also incorporates an auto shutdown mode* which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.
*Dependent on control panel compatibility.
Hochiki CHQ-CB/WLWHT Hochiki-CHQ-CB/WLWHT
- EN54-23 compliant
- Loop powered
- High intensity flash
- Range of coverage diameters
- White LEDs
- Colour-matched with existing sensor range
- Approved by LPCB (Certificate No 164s/04
Fike 302-0012 Twinflex Flashpoint low profile Fike-302-0012-Twinflex-Flashpoint-low-profile
Ideal as a visual indicator directly from the 2-wire zone
Complies with European Standard EN54 part 4
During the alarm, the flashpoint synchronisation is uniquely reset every 10 seconds.
For simple installation, first fix the base then simply plug in the unit
Anti-tamper mechanism – will only be released with the head removal tool
Fike 302-0001 Twinflex Hatari Sounder Red Fike-302-0001-Twinflex-Hatari-Sounder-Red
The twinflex Hatari is designed to comply with the European standard EN54 part 3. The stand alone Hatari sounder can be utilised where extra sound output on the zone is a requirement, or for areas that do not require automatic detection technology. The field wiring is terminated to fixed connectors in the base, and a deep base is available as a separate item if required.
A bayonet locking mechanism means the sounder is easy to install and the anti-tamper feature ensures that the Hatari is only released with the use of the head removal tool
Fully Selectable Sounder Output Level
100 dB Output
Upto 6 Per Zone
Anti-tamper Bayonet Locking Mechanism
Fike 204-0012 Twinflex ASD Detector with sounder & strobe Fike-204-0012-Twinflex-ASD-Detector-with-sounder-and-strobe
2 Wire Multipoint ASD detector with Sounder / Strobe can be set to any one of 3 Smoke modes, 3 Heat modes as well as a Combined Mode (Smoke 2 and Heat 2) where a smoke or heat source can trigger a fire decision.
Twinflex Multipoint ASD Detector with Sounder and Strobe
Smoke, Heat Alarm, Sounder or Combined Mode
Self-calibrates every 6 hours
Continuously monitors for dust contamination
Easily removable for maintenance at height
Multipoint Detectors for use with Twinflex Pro2 Alarm Panel
Fike 204-0001 Twinflex ASD Detector with sounder Fike-204-0001-Twinflex-ASD-Detector-with-sounder
Twinflex Multipoint ASD Detector with Sounder
Smoke, Heat Alarm, Sounder or Combined Mode
Self-calibrates every 6 hours
Continuously monitors for dust contamination
Easily removable for maintenance at height
Multipoint Detectors for use with Twinflex Pro2 Alarm Panel
Apollo 55000-745APO Apollo-55000-745APO
- Uses high intensity LED (white flash)
- EN 54-23 Compliant Category C VAD
- Flash rate 0.5Hz
- Fault signal if LED check failed
- Locking mechanism (grub screw)
- Wide angle of visibility
- Synchronised flash rates with the Apollo Protocol
Apollo 55000-744APO Apollo-55000-744APO
- Uses high intensity LED (white flash only)
- EN 54-23 Compliant Category W. VAD
- Coverage W-2.4-6
- Automatic LED check when VAD activated
- Flash rate 0.5Hz
- Fault signal if LED check failed
- Locking mechanism (grub screw)
- Wide angle of visibility
- Synchronised with the Apollo Protocol
Apollo 55000-018APO Apollo-55000-018APO
- Polarity insensitive
- IP65 rated
- Apollo tone – synchronised with AlarmSense sounders and sounder visual indicator bases
Apollo 55000-017APO Apollo-55000-017APO
- Synchronised flashing red LED on sounder visual indicators and visual indicators
- Polarity insensitive
- IP65 rated
- Apollo tone – synchronised with AlarmSense sounders and sounder visual indicator bases
Apollo 55000-005APO Apollo-55000-005APO
- EN54-3 Sounder
- Selectable Volumes 92dB (A), 100dB (A)
- Visual Indicator Beacon (Red Flash)
- XP95 (works on Discovery & CoreProtocol)
- 4 Isolated Base EN54-17
Apollo 55000-001APO Apollo-55000-001APO
- EN54-3 Sounder
- Selectable Volumes 92dB (A), 100dB (A)
- XP95 (works on Discovery & CoreProtocol)
- 4 Isolated Base EN54-17
ESP White Surface Sounder MAGSWS
- Sound Output @ 1m 86 – 96 dBA
- Current – 6mA @ 24VDC
- IP Rating – IP21
ESP Red Surface Sounder MAGSRS
- Sound Output @ 1m 86 – 96 dBA
- Current – 6mA @ 24VDC
- IP Rating – IP21
ESP Red Bedhead Sounder MAGBSR
- Sound Output @ 1m 86 – 96 dBA
- Current – 6mA @ 24VDC
- IP Rating – IP21
ESP Strobe for MAGDUO MAGDUOSIP55
- IP55 Ingress protection
- LED strobe
- Built-in End of Line function
- Device base included
ESP Sounder Beacon Domed MAGDUOSS
- Complete with 3 sounder modes and LED strobe
- Volume level adjustment
- Built-in End of Line function
- Domed profile design
- Device wiring base included
ESP Sounder Beacon Low Profile MAGDUOSSLP
- Complete with 3 sounder modes and LED strobe
- Volume level adjustment
- Built-in End of Line function
- Low profile design
- Device wiring base included
ESP Sounder Red IP55 MAGDUOSRIP55
- IP55 Ingress protection
- Volume level adjustment
- Built-in End of Line function
- Device base included
ESP Sounder Square White MAGDUOSWSQ
- Wall mount white sounder
- Volume level adjustment
- Built-in End of Line function
- Device base included
ESP Sounder White MAGDUOSW
- Ceiling mount sounder
- Volume level adjustment
- Built-in End of Line function
- Device wiring base included
ESP Sounder Red MAGDUOSR
- Ceiling mount sounder
- Volume level adjustment
- Built-in End of Line function
- Device wiring base included
ESP Cover For Addressable Base Sounder 5Pk MAGPRO-DBSC
- Detector Base Cover Blank Plate for use with MAGPRO Detectors
- Colour: White
ESP Addressable Base Sounder MAGPRO-DBS
- Compatible with:
- MAGPRO-SD1
- MAGPRO-HD1
- MAGPRO-HSD1
ESP Combined Red Banshee Sounder + Strobe CB-1R
- Sound Output – 89-110 dBA
- Flash rate – 60/minute
- Current – 40 mA plus sounder
- IP Rating – IP45
ESP Deep Red Base For Banshee Sounders IP66 BA-DB
- Base for sounder BA-2R, BA-2W and CB-1R to make IP Rated
ESP Red Banshee Excel Sounder (87-112 Dba) BA-2R
- Industry leading sounder with enhanced aesthetics, 32 user-selectable tones
- Designed to meet the requirements of EN 54 part 3, Simple push and twist bayonet mounting with locking screw
- Easy to install with side and rear cable entry, Robust ‘two in two out’ 2.5mm terminals
- Choice of three volume levels, Very low current consumption
- Weatherproof deep base option
Best sellers...
