Detectors
Wireless outdoor bidirectional curtain motion detector DualCurtain-Outdoor-WHITE
Grade 2 Security Cetification EN50131
Works with Hub+, Hub2 & Hub2+
Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.
Protecting property boundaries
DualCurtain Outdoor controls your property perimeter without creating obstacles for people who are already inside. Two independent optical systems with narrow viewing sectors and flexible settings allow you to accurately adjust 30 meters of the detection zone, excluding possible sources of false alarms. The ELSA unique software reacts to intruders, screening out triggers like natural interferences and pets.
Engineering accuracy
On the sides of the detector there are two optical systems with narrow viewing sectors, each equipped with two PIR sensors. Thanks to temperature compensation, detection is always accurate. Sensor signals are analyzed by our new ELSA digital algorithm. Only if two sensors of the same optical system simultaneously capture human motion, the detector activates an alarm.
Efficiency in the near area
DualCurtain Outdoor features a technology to expand the protected area, which is unique among outdoor curtain motion detectors. When Near Area Detection is enabled, the detector’s upper PIR sensor receives an additional narrow viewing sector directed at the angle of 40 degrees down against the main sector. The feature allows both sensors to detect movement when a human crosses the protected perimeter closely to the detector’s body, addressing the problem of the blind spot, which is a typical problem of such detectors.
Near Area Detection is designed to protect windows and other passages that animals have no access to. The proximity of the detection zones’ vectors significantly reduces the efficiency of pet immunity.
One enclosure. Two independent detectors.
The detection range of the two optical systems is adjusted independently. It allows you to precisely set the perimeter guarded by DualCurtain Outdoor and avoid false alarms caused by a bush swaying in the wind or people passing on a public sidewalk. So that the detector’s field of view is not blocked by a column or downpipe on a facade, the optical systems can be shifted vertically. In the app, you can adjust the sensitivity or deactivate one of the optical systems.
Resistant to attacks
DualCurtain Outdoor can not be unnoticeably blinded or disabled even if Ajax is disarmed. Detector’s optical systems are reinforced with advanced masking sensors that respond to obstacles, covering and painting the lenses. The tamper will not allow to unnoticeably remove the device from the mount. And even if the detector is instantly destroyed, it will take the hub less than a minute to detect the loss of communication and inform a central monitoring station and users about the problem.
Outstanding autonomy
Due to its low energy consumption, DualCurtain Outdoor operates for years from pre-installed batteries. A monitoring station and users will be warned in advance about the need for the device maintenance.
Installation without brain teasers
The process of connecting and configuring DualCurtain Outdoor saves the installation engineer’s time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time while testing detection zones and communication. If necessary, the detector can be disabled or its system parameters can be reconfigured remotely, without site visits.
Hikvision AX PRO Series Wireless External Magnet Detector DS-PDMCX-E-WE
- IP66 protective level, UV stable
- Fully remote configurable through App
- Multiple enrollment methods and easy installation design
- Frequency hopping against jamming for reliable transmission
Hikvision Face Recognition Terminal DS-K1T680D-E1
- 8-inch touch screen with bezel-less design
- Presents card on the screen to authenticate
- Face recognition distance: 0.3 m to 3 m, duration ＜ 0.2 s/User, accuracy rate ≥ 99%
- 100,000 face capacity, 100,000 card capacity (Felica, DESfire, M1), and 150,000 event capacity
- Supports ISAPI, ISUP 5.0, Wiegand, RS-485, TCP/IP, and PoE
- Two-way audio with indoor station and master station
- Configuration via the web client and mobile client
- Customizes attendance status name
Hikvision Face Recognition Terminal DS-K1T671M
- Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
- Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
- 7-inch LCD touch screen, 2 Mega pixel wide-angle lens, built-in Mifare card reading module
- Face recognition distance (without face mask): 0.3 m to 3 m, Duration ＜ 0.2 s/User, Accuracy rate ≥ 99%
- Max.6000 faces, Max.6000 cards
- Two-way audio with client software, indoor station, and mainstation
- Supports TCP/IP
- Configuration via the web client
- Supports ISAPI and ISUP5.0 protocol
- IP65
Wireless opening detector DoorProtect-WHITE
Grade 2 Security Cetification EN50131
Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base.
Operates up to 7 years without battery replacement
External contact is available for connecting third-party detectors
Shock & tilt sensor
Includes magnets of various sizes for installation on narrow frames and door frames
Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.
Principle of operation
Features
Installation and set up
Wireless opening detector DoorProtect-BLACK
Grade 2 Security Cetification EN50131
Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base.
Operates up to 7 years without battery replacement
External contact is available for connecting third-party detectors
Shock & tilt sensor
Includes magnets of various sizes for installation on narrow frames and door frames
Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.
Principle of operation
Features
Installation and set up
Wireless Carbon Monoxide Detector CO-WE2
- Two-way wireless CO sensor
- Detects harmful odourless carbon monoxide (CO)
- Loud and obvious alarm
- Low-battery supervision
- Signal Strength Indicator
- Pyronix High Security Wireless Encryption Protocol
- No wires, no mess
- One-Push-To-Learn Button
C4 EN54-5 A1R heat detector C4403A1R
- LPCB certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD
- Impressive 100dB(A) sound output @ 1m
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- IP33C rated
- Manufactured in the UK by C-TEC
GEM External Curtain Detector GJD150W
- Narrow PIR curtain lens
- Up to 12m selectable detection range
- N/C volt free contacts for alarm
- T Bracket provided
- Swivel bracket available to order
Up to 60m Motion Detector D-TECT-60-GJD320
- Detection area of up to 60m
- Adjustable pan and tilt
- A conduit cable adaptor is available
- Engineer friendly features to ease cable termination, set-up and
servicing - Covert sensor module
Wired Shock Detector SHOCK/W
Sleek and stylish design
Piezo electric sensor detection
Adjustable sensitivity
Latch functionality included
Reverse polarity protection
5 years warranty
CA Optical Smoke Detector CA430A/DR
C-TEC CA430A/DR HI-OUTPUT ADDRESSABLE WALL SOUNDER
The C-Tec CA430A/DR is a red wall mounted high output addressable wall sounder with IP33C deep base designed for use on C-Tec CAST protocol analogue addressable fire alarm systems.
Features
LPCB certified to EN54-3 & 17 and Kiwa Telefication certified to EN54-13.
Impressive 100dB(A) sound output @ 1m.
Onboard short-circuit loop isolator.
6.5mA typical alarm current (460µA typical quiescent current) @24-40V DC (Sounder on max).
Group addressing facility allows multiple devices to be operated simultaneously.
4 selectable volume levels and 31 selectable tones.
IP33C (Type B) rated.
CA Programmable Multisensor Detector CA414
C4 EN54-7 Optical detector C4416
- A high-quality optical smoke detector offering outstanding detection performance at a very competitive price
- Manufactured by C-TEC in the UK
- Third-party certified to EN54-7 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
- Wide 6-33V DC operating voltage
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
- Class A1 fixed heat, class B fixed heat, class A1R rate-of-rise and multi-sensor variants also available
- Excellent discounts for quantity orders
C4 EN54-29 Multi-sensor C4414
- A high-quality combined optical + heat multi-sensor offering outstanding detection performance at a very competitive price
- Manufactured by C-TEC in the UK
- Third-party certified to EN54-5 & 7 by Intertek
- Carries the pan-European ‘CertAlarm’ mark
- Wide 6-33V DC operating voltage
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag)
- Class A1 fixed heat, class B fixed heat, class A1R rate-of-rise and optical variants also available
- Excellent discounts for quantity orders
FlipX Standard Indoor PIR Sensor with Rotatable Lens. FLX-S-ST
- Hardwired indoor PIR with rotatable lens
- Wide detection up to 12m, 85 degree, and narrow detection up to 18m
- Superior pet tolerance with new pyroelectric element
- Variable high mount 2.0-3.0 meters
CX C Class Base sounder VAD WHITE BF456A/CX/W
- Third-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by the LPCB
- Provides ‘C-3-8’ light distribution (min 0.4 lux over a 3 x 8m cylindrical area)
- Supplied with a BF431QCP quick connect plate and detector spur wires
- Impressive 96dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current
- 14mA alarm current @24V DC (VAD lit, sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use
- IP21C rated
CX COMP ceiling sounder VAD WHITE BF451A/CX/SW
- Third-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by Intertek (pending)
- Provides ‘C-3-8 light distribution when ceiling mounted (min 0.4 lux over a 3 x 8m cylindrical area)
- Can also provide ‘W-2.4-3.5’ light distribution when wall mounted (min. 0.4 lux over a 2.4 x 3.5m cuboid area)
- Impressive 90dB(A) sound output @ 1m
- Unique C-TEC designed lens maximises light output whilst minimising current draw
- Onboard short-circuit loop isolator
- 550uA quiescent current
- 14mA alarm current @24V DC (VAD lit, sounder on max)
- Attractively finished in white polycarbonate (light output is white)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- Attractive compact design – just 102mm diameter, 63mm deep
- Includes an integrated sounder to base locking mechanism
- IP21C rated
- Low current consumption means multiple devices can be connected to the loop
- DIP switch addressed
- Simple ‘click and twist’ design and easy-fit base ensures rapid installation time
- Also available in a red plastic housing (order code BF451A/CX/SR)
CX COMP ceiling sounder WHITE BF450A/CX/SW
- Third-party certified to EN54-3 (Sounders) and EN54-17 (Isolators) by Intertek (pending)
- Impressive 90dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 5mA alarm current @24V DC (sounder on max)
- Attractively finished in white polycarbonate
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- Attractive compact design – just 102mm diameter, 63mm deep
- Includes an integrated sounder to base locking mechanism
- IP21C rated
- Low current consumption means multiple devices can be connected to the loop
- DIP switch addressed
- Simple ‘click and twist’ design and easy-fit base ensures rapid installation time
- Also available in a red plastic housing (order code BF450A/CX/SR)
CX Base sounder WHITE BF431A/CX/W
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB.
- Impressive 96dB(A) sound output @ 1m.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- Onboard short-circuit loop isolator.
- 550µA quiescent current.
- 5mA alarm current @24V DC (Sounder on max).
- Group addressing facility allows multiple devices to be operated simultaneously.
- 7 selectable volume levels and up to 15 selectable tone pairs.
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- IP21C rated.
Best sellers...
Knightsbridge Screwless 10AX 2G 2-Way Toggle Switch – Polished Brass SF2TOGPB
