Accessories
Apollo 45681-276APO Apollo-45681-276APO
- Two Apollo Tones
- EN54-3 Sounder
- Multiple Selectable Volumes
- XP95 (works on Discovery & CoreProtocol)
- Activated via Detector head, does not take up an address
- 4 Isolated Base EN54-17
Apollo 45681-210APO Apollo-45681-210APO
- XPERT addressing
- XPERT cards supplied with all bases
- Locking feature to prevent unauthorised detector removal
- Ideal for the XP95 and Discovery detector ranges
Y3.2-12 Yuasa Yucel 12v 3.2Ah Lead Acid Battery
- Voltage : 12v
- Capacity : 3.2ah
- Weight : 1.2kg
- Dimensions : 134mm x 67mm x 64mm
- Yuasa Yucel Y3.2-12, 12v 3.2Ah Sealed Lead Acid / VALVE REGULATED LEAD ACID Battery
- Terminals : 4.8mm / 0.187 Wide Male Spade Connection
- Battery Type: Standby battery
- Can be used to replace: Y2.8-12, NP2.8-12, NPG2.8-12, NP2.6-12, NP3.2-12, y3.2-12
Powersonic PS-1221VDS F1 FR Powersonic-PS-1221VDS-F1-FR
12V 2.1 VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover flame retardant to UL94:V-0
5 year design life
Model Number: PS-1221VdS FR
Nominal voltage: 12V
Capacity @20HR (AH): 2.10 Ah
Capacity @10HR (AH): 1.90 Ah
Weight: 1.0kg / 2.1lbs
Case: UL94:V0 Flame retardant plastic
Dimensions
Length: 7.01 / 178mm
Width: 1.38 / 35mm
Height: 2.36/60mm
Powersonic PS-1270VDS F1 FR Powersonic-PS-1270VDS-F1-FR
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover flame retardant to UL94:V-0
5 year design life
Model Number: PS-1270VdS F1 FR
Nominal voltage: 12V
Capacity @20HR (AH): 7.00 Ah
Capacity @10HR (AH): 6.53 Ah
Weight: 2.2kg / 4.8lbs
Case: UL94:V0 flame retardant plastic
Dimensions
Length: 5.94 / 151mm
Width: 2.56/ 65mm
Height: 3.70 / 94mm
Powersonic PS-1270VDS F1 Powersonic-PS-1270VDS-F1
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover
5 year design life
Model Number: PS-1270VdS
Nominal voltage: 12V
Capacity @20HR (AH): 7.00 Ah
Capacity @10HR (AH): 6.53 Ah
Weight: 2.2kg / 4.8lbs
Case: ABS UL94:HB
Dimensions
Length: 5.94 / 151mm
Width: 2.56/ 65mm
Height: 3.70 / 94mm
Powersonic PS-12400 M6 FR Powersonic-PS-12400-M6-FR
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover flame retardant to UL94:V-0
5 year design life
Model Number: PS-12400 M6 FR
Nominal voltage: 12V
Capacity @20HR (AH): 40.00 Ah
Capacity @10HR (AH): 38.00 Ah
Weight: 13.2kg / 29.1lbs
Case: ABS UL94:V0
Dimensions
Length: 7.76 / 197mm
Width: 6.5/ 165mm
Height: 6.69 / 170mm
Powersonic PS-12380VDS M6 Powersonic-PS-12380VDS-M6
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover
5 year design life
Powersonic PS-1230VDS F1 FR Powersonic-PS-1230VDS-F1-FR
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior
performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover flame retardant to UL94:V-0
5 year design life
Model Number: PS-1230VdS FR
Nominal voltage: 12V
Capacity @20НR (АН): 3.40 Ah
Capacity @10НR (АН): 3.20 Ah
Weight: 1.4kg / 3.0lbs
Case: UL94:V0 Flame retardant plastic
Dimensions
Length: 5.28 / 134mm
Width: 2.64 / 67mm
Height: 2.38/ 60.5mm
Powersonic PS-1230VDS Powersonic-PS-1230VDS-F1
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior
performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover
5 year design life
Model Number: PS-1230VdS
Nominal voltage: 12V
Capacity @20HR (AH): 3.40 Ah
Capacity @10HR (АН): 3.20 Ah
Weight: 1.4kg / 3.0lbs
Case: ABS UL94:HB
Powersonic PS-12260VDS M5 FR Powersonic-PS-12260VDS-M5-FR
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover flame retardant to UL94:V-0
10-12 year design life
Model Number: PS-12260VdS M5 FR
Nominal voltage: 12V
Capacity @20HR (AH): 26.00 Ah
Capacity @10HR (AH): 24.20 Ah
Weight: 7.8kg / 17.2lbs
Case: ABS UL94:V0 Flame retardant plastic
Dimensions
Length: 6.56 / 166.5mm
Width: 6.89/ 175mm
Height: 4.65 / 118mm
Powersonic PS-12260VDS M5 Powersonic-PS-12260VDS-M5
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover
10-12 year design life
Model Number: PS-12260VdS M5
Nominal voltage: 12V
Capacity @20HR (AH): 26.00 Ah
Capacity @10HR (AH): 24.20 Ah
Weight: 7.8kg / 17.2lbs
Case: ABS UL94:HB
Dimensions
Length: 6.56 / 166.5mm
Width: 6.89/ 175mm
Height: 4.65 / 118mm
Powersonic PS-1221VDS F1 Powersonic-PS-1221VDS-F1
12V 2.1Ah VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover
5 year design life
Model Number: PS-1221VdS
Nominal voltage: 12V
Capacity @20HR (AH): 2.10 Ah
Capacity @10HR (AH): 1.90 Ah
Weight: 1.0kg / 2.1lbs
Case: ABS UL94:HB
Length: 7.01 / 178mm
Width: 1.38/ 35mm
Height: 2.36/60mm
Powersonic PS-12180 M5 FR Powersonic-PS-12180-M5-FR
General purpose VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover flame retardant to UL94:V-0
5 year design life
Model Number: PS-12180 M5 FR
Nominal voltage: 12V
Capacity @20HR (AH): 18.00 Ah
Capacity @10HR (AH): 17.10 Ah
Weight: 5.6kg / 12.32lbs
Case: ABS UL94:V0 Flame retardant plastic
Dimensions
Length: 7.13 / 181mm
Width: 3.00/ 76mm
Height: 6.59 / 167mm
Powersonic PS-12170VDS M5 Powersonic-PS-12170VDS-M5
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover
5 year design life
Model Number: PS-12170DVS M5
Nominal voltage: 12V
Capacity @20HR (AH): 17.00 Ah
Capacity @10HR (AH): 16.00 Ah
Weight: 5.7kg / 12.6lbs
Case: ABS UL94:HB
Dimensions
Length: 7.15 / 181.5mm
Width: 3.03/ 77mm
Height: 6.59 / 167.5mm
Powersonic PS-1212VDS F1 FR Powersonic-PS-1212VDS-F1-FR
Absorbent Glass Mat (AGM) technology for
superior performance
Valve regulated, maintenance free spill proof construction
Power/volume ratio yielding excellent energy density
Rugged impact resistant ABS case and cover flame retardant to UL94:V-0
5 year design life
Model Number: PS-1212VdS FR
Nominal voltage: 12V
Capacity @20HR (AН): 1.20 Ah
Capacity @10HR (AH): 1.12 Ah
Weight: 0.6kg / 1.3lbs
Case: UL94:V0 Flame retardant plastic
Dimensions
Length: 3.82 / 97mm
Width: 1.69 / 43mm
Height: 2.05 / 52mm
Powersonic PS-1212VDS F1 Powersonic-PS-1212VDS-F1
Absorbent Glass Mat (AGM) technology for
superior performance
Valve regulated, maintenance free spill proof construction
Power/volume ratio yielding excellent energy density
Rugged vibration and impact resistant ABS case and cover
Gas recombination technology
5 year design life
Model Number: PS-1212
Nominal voltage: 12V
Capacity @20HR (AH): 1.40 Ah
Capacity @10HR (AH): 1.30 Ah
Weight: 0.5kg / 1.2lbs
Case: ABS UL94-HB
Dimensions
Length: 3.78/96mm
Width: 1.69/ 43mm
Height: 2.04 / 52mm
Powersonic PS-12120VDS F1 FR Powersonic-PS-12120VDS-F1-FR
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover flame retardant to UL94:V-0
5 year design life
Model Number: PS-12120VDS F1 FR
Nominal voltage: 12V
Capacity @20HR (AH): 12.00 Ah
Capacity @10HR (AH): 11.20 Ah
Weight: 3.5kg / 7.7lbs
Case: ABS UL94:V-0
Dimensions
Length: 5.94 / 151mm
Width: 3.86/ 98mm
Height: 3.74 / 95mm
Powersonic PS-12120VDS F1 Powersonic-PS-12120VDS-F1
VdS and NCP approved VRLA battery
Absorbent Glass Mat (AGM) technology for superior performance
Power and volume ratio yielding unrivalled energy density
Valve regulated, maintenance free spill proof construction
Rugged impact resistant ABS case and cover
5 year design life
Model Number: PS-12120VDS F1
Nominal voltage: 12V
Capacity @20HR (AH): 12.00 Ah
Capacity @10HR (AH): 11.20 Ah
Weight: 3.5kg / 7.7lbs
Case: ABS UL94:HB
Dimensions
Length: 5.94 / 151mm
Width: 3.86/ 98mm
Height: 3.74 / 95mm
NP3.2-12 (12V 3.2Ah) Yuasa General Purpose VRLA Battery
- EUROBAT Classification: 3 to 5 years ‘Standard Commercial’
- General purpose VRLA battery
- Lead Calcium Grids for superior life
- Absorbed Glass Mat construction with no free acid
- Gas recombination
- Manufactured world wide
- Good recovery from deep discharge
- Operation in any orientation (excluding continuous inverted use)
- Capacity Ah (20-HR): 3.2
- Capacity at 20-hour Rate (Ah): 3.2
Morley Serial enabling key Morley-Serial-enabling-key
Morley-IAS E-SIB Dongle Key for Serial Communications CAN NUS Network and TPP
Morley KIT DXc NETWORK CARD Morley-KIT-DXc-NETWORK-CARD
In order to connect panels together to create a network a DXc Network card must be fitted to each panel.
Morley KIT DXc 80 ZONE LED CARD Morley-KIT-DXc-80-ZONE-LED-CARD
80 zone LED card which includes PCB, ribbon cable, zone number labels & fixings designed for the Morley DXc range of fire alarm control panels. The zone led card is to be fitted to the lower half of the DXc panel front door
Morley KIT DXc 40 ZONE LED CARD Morley-KIT-DXc-40-ZONE-LED-CARD
40 Zone LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half of the front door.
Morley FIRE PANEL ANSC SYSTEM SENSOR LOOP CARD Morley-Fire-Panel-ANSC-System-Sensor-Loop-Card
- MKII Loop driver card System Sensor protocol
- 460mA
- 3 year warranty
Morley FIRE PANEL ANSC IAS EXP 038 HI-485 CARD MODULE Morley-Fire-Panel-ANSC-IAS-EXP-038-HI-485-Card-Module
- Hi-485 communication module
- Pcb only
- Requires an RS485 card to be fitted in the control panel
Morley FIRE PANEL ANSC IAS 485 COMM MODULE P PLUG-IN-CARD Morley-Fire-Panel-ANSC-IAS-485-COMM-Module-P-Plug-In-Card
- Compatible with ZX series multi protocol intelligent fire alarm control panels.
- Easy plug-in type connection.
- Peripheral bus for remote I/O devices.
- Active and passive repeaters
- External printers
- 4-way programmable relay and sounder cards
- 8-way input cards
- 40-way mimic driver cards
- Modbus and pager interface modules
Morley MAx 7” touch display full Rep/Zones Morley-MAx-7-touch-display-full-Rep/Zones
Morley-IAS MA-LCD7 Max 7 Touchscreen Repeater
Morley FIRE PANEL ANSC IAS 232 COMM CAR PLUG-IN-CARD. Morley-Fire-Panel-ANSC-IAS-232-COMM-CAR-Plug-In-Card
- Compatible with ZX series multi protocol intelligent fire alarm control panels
- Easy plug-in type connection
- RS232 and RS485 options
- Hi-485 High-integrity option for critical applications
- Class-A or Class-B networking capability
- Peripheral bus for remote I/O devices (RS485)
- Leased line modem link (RS232)
- Third-party graphic front-end interfacing
Hochiki CHQ-POM Hochiki-CHQ-POM
Model CHQ-POM is a powered-output module designed to supply 24 V dc at various, user-selectable current levels from 2 to 32 mA (in increments of 2 mA).
The unit is small enough to be added to other third-party devices thereby allowing a range of equipment to be added to the ESP loop. The unit also features two monitored inputs.
Hochiki CHQ-MRC2SCI Hochiki-CHQ-MRC2SCI
Model CHQ-MRC2(SCI) is a mains relay controller providing a single mains rated relay output for the control of such devices as dampers, extractors or plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.
*Requires mounting within a 5 Kg enclosure – not supplied.
Hochiki CHQ-DZMSCI Hochiki-CHQ-DZMSCI
Model CHQ-DZM(SCI) is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors (30 on each zone) to be interfaced to Hochiki’s ESP analogue addressable system. The unit also features a Schottky Diode line continuity option, when used inconjunction with the optional LCMU.
Full monitoring against malfunction or disconnection, together with a self-test feature through the ESP protocol, ensure the integrity of the CHQ-DZM(SCI) at all times. The CHQ-DZM(SCI) utilises simple DIL switches for reliable addressing. It is available as an OEM version (as illustrated above) and also as a DIN Rail mountable module
(CHQ-DZM/DIN(SCI)). Both models feature an integral short-circuit isolator.
NOTE: When Resistive EOL option is chosen the conventional zone on the
CHQ-DZM(SCI) does not support any line continuity options, therefore if Call Points are being interfaced they should be wired at the beginning of the zone.
Hochiki CHQ-DRC2SCI Hochiki-CHQ-DRC2SCI
Model CHQ-DRC2(SCI) is a Dual Relay Controller designed to provide two general-purpose relay outputs, each output can be driven separately for control of such devices as dampers or for control of plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.
The unit is also available as a DIN Rail mountable version; both models feature an integral short-circuit isolator. The CHQ-DRC2(SCI) utilises simple DIL switches for reliable addressing. A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQ-DRC2(SCI), increases the IP rating to IP65.
Hochiki YBO-R/3RED Hochiki-YBO-R/3RED
Model YBO-R/3(RED) is a Sounder Mounting Base, which is fully compatible with Hochiki’s ESP range of wall sounders, the CHQ-WS2 Wall Sounder and the CHQ-WSB Wall Sounder Beacon.
It is supplied with square cable clamps for secure and reliable cable termination.
Hochiki YBO-BSWHT Hochiki-YBO-BSWHT
Model YBO-BS is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base (YBO-R/SCI – from Batch Number 6044) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators.
The unit can also be converted into a wall sounder with the simple addition of a Cap (SI/CAP). The sounder is Ingress Protection rated to IP21 and for internal use only.
An Auto-Shutdown feature allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, cutting noise pollution (dependant on control panel compatibility).Model YBO-BS is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base (YBO-R/SCI – from Batch Number 6044) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators.
The unit can also be converted into a wall sounder with the simple addition of a Cap (SI/CAP). The sounder is Ingress Protection rated to IP21 and for internal use only.
An Auto-Shutdown feature allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, cutting noise pollution (dependant on control panel compatibility).
Hochiki YBN-R/3WHT Hochiki-YBN-R/3WHT
Model YBN-R/3 is a Common Mounting Base, which is fully compatible with Hochiki’s ESP range of sensors.
It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.
Hochiki TCH-B200 Hochiki-TCH-B200
Model TCH-B200 is a hand held address programmer designed to address the ESP range of Sensors and all other addressable devices such as wall sounders, mini-modules and manual call points (with the use of a programming lead – sold separately). The unit is designed to be light, robust and easy to use and operates from a single PP3 size battery, which gives the capacity for up to 8000 operations. The programmer is also capable of displaying the sensor analogue values.
Hochiki CHQ-DSC2SCI Hochiki-CHQ-DSC2SCI
Model CHQ-DSC2(SCI) is a Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.
The unit utilises simple DIL switches for reliable addressing. A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQ-DSC2(SCI), increases the IP rating to IP65.
Hochiki CHQ Hochiki-CHQ
The CHQ-BACKBOX is designed for installations where the CHQ Range of Modules – CHQ-DIM(SCI), CHQ-SZM(SCI), CHQ-DZM(SCI), CHQ-DSC(SCI), CHQ-MRC(SCI), CHQ-DRC(SCI) and CHQ-PCM – require mounting within a glanded enclosure.
The unit features ten knock-outs suitable for cable glands (not supplied) and accepts the CHQ Modules directly as a lid
Fike 802-0006 Twinflex I/O Unit Fike-802-0006-Twinflex-I/O-Unit
The Twinflex I/O module is a Relay interfacing module with monitored input to provide shutdown and monitoring facilities from the Twinflex zone. Mounted in a standard double gang box, including two sets of 2A rated SPCO relay contacts, one monitored input and inbuilt ‘End of Line’.
Input/Output module
Mounted on a double gang back-box
Twinflex compatible
Apollo SA4700-104APO Apollo-SA4700-104APO
- EN 54-17 & EN 54-18 Certified
- Meets BS 7273-4 failsafe requirements
- Ergonomic design for ease of wiring and faster installation
- Suitable for semi flush or surface mounting
- XP95, Discovery and CoreProtocol compatible
Apollo SA4700-103APO Apollo-SA4700-103APO
- EN 54-17 & EN 54-18 Certified
- Two input channels
- Meets BS 7273-4 failsafe requirements
- Ergonomic design for ease of wiring and faster installation
- Suitable for semi flush or surface mounting
- XP95, Discovery and CoreProtocol compatible
Apollo SA4700-102APO Apollo-SA4700-102APO
- EN 54-17 & EN 54-18 Certified
- Meets BS 7273-4 failsafe requirements
- Ergonomic design for ease of wiring and faster installation
- Suitable for semi flush or surface mounting
- XP95, Discovery and CoreProtocol compatible
Apollo 55000-835APO Apollo-55000-835APO
The AlarmSense Alarm Relay Module enables devices such as visual indicators, pillow/bed alarms and radio vibrating or paging devices to be connected to the fire detection system.
This allows the system to comply with the requirements of the DDA.
Apollo 55000-760APO Apollo-55000-760APO
- EN 54-17 & EN 54-18 Certified
- Designed for use where space is limited
- Allows DIN-Rail mounting
- Priority and non-priority settings
- Pre-alarm’ status available
- XP95, Discovery compatible
Apollo 45682-800APO Apollo-45682-800APO
- Allows installation in all base types, meaning you only need to carry this one type of card alleviating the need for multiple cards when using Apollo products.
- Flexibility to create any address; includes 128th pip for CoreProtocol systems
- An additional lead-in on the address pips allows for a higher tolerance
- Simplifies and speeds up installation and commissioning
- Address remains the same, no matter how often the detectors are replaced
- Pack of 25
Apollo 45681-709APO Apollo-45681-709APO
- EN 54-23 Certified Category O VAD
- 0.5Hz Flash Rate (white)
- Synchronisation of VAD flash
- Individual & group addressing
- Unique VAD self-test
- Loop-powered
- Built-in isolator
Apollo 45681-705APO Apollo-45681-705APO
- Two-Tone EN54-3 Sounder
- Multiple Selectable Volume
- EN54-23 Category ‘O’ VAD Beacon (White-Flash)
- XP95 (works on Discovery & CoreProtocol)
- 4 Isolated Base EN54-17
Apollo 45681-510APO Apollo-45681-510APO
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detectors
- Quick and simple installation
- Provides audible signal and detection at one point
- High and low volume ranges
Apollo 45681-284APO Apollo-45681-284APO
- Detects wiring short-circuits
- High brightness LED
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
Apollo 45681-277APO Apollo-45681-277APO
- Two Apollo Tones
- EN54-3 Sounder
- Selectable Volumes 55–75dB (A), 75–91dB (A)
- XP95 (works on Discovery & CoreProtocol)
- XPert7 Addressing
- 4 Isolated Base
Apollo 45681-509APO Apollo-45681-509APO
- Sounder range between 70dB(A) and 87dB(A)
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detectors
- Quick and simple installation
Apollo 45681-278APO Apollo-45681-278APO
- Two tones
- Two volume ranges 55-75dB(A) and 75-91dB(A)
- Individual and group addressing
- Unique acoustic self-test
Apollo 45681-244APO Apollo-45681-244APO
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detectors
- Quick and simple installation
Apollo 45681-206APO Apollo-45681-206APO
- Detector locking mechanism
- One-way fit
- Easy to wire
- Contains an earth connector
Apollo 45681-201APO Apollo-45681-201APO
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Continues to work during unauthorised removal of detectors
Advanced MXP-567 Advanced-MXP-567
The Advanced loop driver card allows the expansion of an additional loop for a MxPro 5 panel providing the panel has capacity.
The Loop Driver Card MXP-567 can be used with the Nittan
protocol.
For use with MxPro 5 analogue addressable panels
Advanced MXP-503 Advanced-MXP-503
The Ad-NeT network system allows all MxPro 5 series control
panels, remote terminals and network peripherals to be
connected together using standard fire resistant two-core cable.
It provides both the benefits of distributed intelligence and
reduced installation costs whilst catering for the smallest
two-panel network through to the largest 200-panel wide area
networked system.
The network operates as a true peer-to-peer system allowing
information from any input or output device to be passed over
the network and displayed on any MxPro 5 control panel or
remote terminal as required.
Simply adding and connecting a network card allows any MxPro
5 control panel or remote terminal to be networked. All other
nodes on the Ad-NeT system will be instantly aware of a panel
as soon as it is given a valid network node address, allowing
additional panels to be added at any time. All panels incorporate
a network analyser providing valuable diagnostic and status
information and also have the facility to prevent the transmission
of fires or faults during commissioning.
For more complex systems, the Windows-based PC-NeT Mx
configuration software allows sector based programming for
Mute, Silence, Resound and Reset control keys as well as
investigation delays, group disablement and test instructions. All
panels within the same sector will share common controls and
each panel or remote terminal can also be programmed to show
specific network information on a zonal basis. For cause and
effect, any input device can be programmed to operate any
output device on any pane
Advanced MXP-502 Advanced-MXP-502
The Loop Driver Card is designed for use with the MxPro 5 range of analogue addressable panels. It provides control and connection to detector loops.
The Loop Driver Card Mxp-502 can be used with Apollo, Hochiki
or Argus Vega protocols
Advanced MXM-503 Advanced-MXM-503
All bezels are provided complete with fitting kit for a quick and
easy solution for semi-recessing the MxPro 5 series control
panels.
Please note: when recessing, extra clearance (5mm all sides)
must be factored to allow the bezel to be fitted to the backbox.
MXM-503 Semi-Flushing Bezel – Mx-5000 large enclosure
475mm(H) x 450mm (W) 30mm 105mm
Advanced MXM-502 Advanced-MXM-502
All bezels are provided complete with fitting kit for a quick and
easy solution for semi-recessing the MxPro 5 series control
panels.
Please note: when recessing, extra clearance (5mm all sides)
must be factored to allow the bezel to be fitted to the backbox.
Mxm-502 Semi-Flushing Bezel – Mx-5000 medium enclosure
345mm (H) x 430mm (W) 30mm 105mm
Advanced MXM-501 Advanced-MXM-501
All bezels are provided complete with fitting kit for a quick and
easy solution for semi-recessing the MxPro 5 series control
panels.
Please note: when recessing, extra clearance (5mm all sides)
must be factored to allow the bezel to be fitted to the backbox.
Mxm-501 Semi-Flushing Bezel – Mx-5000 small enclosure
345mm (H) x 345mm (W) 30mm 70mm
12V 7Ah Sealed Lead Acid Battery
- General purpose VRLA battery
- Lead Calcium Grids for superior life
- Absorbed Glass Mat construction with no free acid
- Gas recombination
- Good recovery from deep discharge
- Operation in any orientation (excluding continuous inverted use)
- Dimensions WxHxL: 65 x 97.5 x 151mm
- Weight: 2.2kg
Ventcroft VCA-S8DR Fire Accy Back Box 8mm Saddle Red (50x)
Ventcroft VCA-S8DR Fire Accy Back Box 8mm Saddle Red (50x)
Ideal for use with NoBurn fire cable and most other fire cable brands.
The Cable Clips are manufactured by Dip Coated technique which ensures a softer edge so as not to cut or damage the fire cable.
Ventcroft VCA-C7SR Fire Accy Back Box 7mm P Clip Red (50x)
Ventcroft VCA-C7SR Fire Accy Back Box 7mm P Clip Red (50x)
ideal for use with NoBurn fire cable and most other fire cable brands.
The Cable Clips are manufactured by Dip Coated technique which ensures a softer edge so as not to cut or damage the fire cable.
Ventcroft No Burn Platinum Enhanced Performance Red 2 Core & Earth VNP-215ERH-100m
- Fastest Enhanced Fire Cable to Prepare for Termination
- Easy to Install and Superb Working Flexibility
- Up to 12 Twists per metre for Data Protection
- Full Size CPC (Earth Core)
- 1.0mm²,1.5mm² & 2.5mm² Conductors
- Copper / Co-polymer Foil Screen
- Low Smoke & Zero Halogen
- Voltage Rating 300v/500v
Ventcroft 2 Core 1.5mm 100m Red Fire Cable VFP-215ERH-100m
- Fastest Standard Fire Cable to Prepare for Termination
- Easy to Install and Superb Working Flexibility
- Up to 12 Twists per metre for Data Protection
- 1mm²,1.5mm², 2.5mm² & 4.0mm² Conductors
- Aluminium / Co-polymer Foil Screen
- Low Smoke & Zero Halogen
- Voltage Rating 300v/500v
- Suitable for Zone 1 and Zone 2 hazardous area use
Aico RadioLink Alarm Base Ei168RC
- Mains powered base with rechargeable lithium cell back-up
- Add this to the 140e series alarms for RadioLINK wireless interconnection
- Compatible with other Aico wireless interconnection products
- Eliminates tricky wiring runs
- Saves time, mess and money
- Makes it easier to add in new alarms and accessories
HiSpec 10W Photo Sensor Lamp HSLAMP/4K/PC
- E27
- Cool White 4000K
- 800 Lumens
- Beam Angle 120 Degree
- 2 Year Guarantee
ESP Fire Safety Log Book MAGLB
- Ensure system records are maintained in accordance with BS5839-1
- Contains test procedures, frequencies of service & maintenance requirements
- Clear data tables for evidence of system services, tests and inspections
- A4
ESP EN54-4 5A PSU BPS5EN
- Certified to EN54-4
- 27.6V DC Output @ 5A
- LED Indication for Mains Status, Output Fault, Battery Fault, Charger fault
ESP EN54-4 2A PSU BPS2EN
- Certified to EN54-4
- 27.6V DC Output @ 2A
- LED Indication for Mains Status, Output Fault, Battery Fault, Charger fault
ESP Battery Expansion Box for MAGPRO96G MAGPRO96GBB
- Certified according to EN 54-4
- Supports 2x 12V/18Ah
ESP 50m Beam Detector expandable up to 120m BD1
- Up to 50m range
- Expandable to 120m with the BD1LRK
- Integral laser alignment
- Auto Align automatic beam alignment
- 24v DC 35mA max current draw
- EN 54-12 approved
HiSpec 10W Motion Sensor Lamp HSLAMP/4K/MS
- E27
- Cool White 4000K
- 800 Lumens
- Detection Distance 6 Meters
- Beam Angle 120 Degree
- 2 Year Guarantee
ESP Battery Expansion Box for MAGDUO MAGDUOBBB
- Includes; conduit bushes, coupling and battery leads
ESP Input/Output Relay Module MAGDUOIOR
- Configure as an input for reporting from other systems or devices
- Configure as an output to control external systems
- Built-in End of Line function
ESP 2 Wire 4 Zone Expansion Card (For Magduo4 / Magduo4B Only) MAGDUOZC4
- Expands a 4 zone MAGDUO4 to an 8 zone panel
ESP Remote Led Indicator Surface Plate
- Flash rate – permanent
- Current – 28 mA Max
- Operating Voltage Range – 5-28V DC
ESP 8 Zone Activated Relay Module MAGR
- Expander module providing 8 relay switches for zone activation
- Separate zone (max. 8) activation in fire condition
- N.O & N.C options
ESP Programming Tool For Protocol Devices MAGPRO-PROG
- Built in MAGPRO-DB standard base
- Mains or battery powered (4 x 1.5V not included)
- Programming cable included
ESP Loop Isolator Module MAGPRO-IM
- Protection against short circuit
- Auto reset after short circuit
- 4 x cable entry points
- A maximum of 30 devices between two isolators
- Certified to EN54-17
ESP Conventional Zone Module With Isolator MAGPRO-CZM
- Integrate conventional detectors into an addressable system
- Max number of detectors in one zone – 32
- Loop powered
- Built in isolator
- Certified to EN54-18
- Example applications – Integrate conventional equipment i.e. beam detectors
ESP 4 Output Module With Isolator MAGPRO-0I4O
- 4 Relay outputs
- Loop powered
- Built in isolator
- Certified to EN5-18
- Example applications – Shutdown of ventilation equipment and door override
ESP Fire Isolation Switch Spare Fuses (Pk 5) MAGISOPFUSE
- Spare fuses for MAGISORP – Fire Isolator Switch
ESP Sounder Circuit Resistor Module MAGEOL-S
- End of line sounder module (Pack of 5)
- For Conventional Panels
ESP Detector Circuit Resistor Module – Pk5 MAGEOL
- End of line zone module (Pack of 5)
- For conventional panels
ESP Spare Barrel & Key For Mag2/2P/4/4P MAGBAR2/4
Spare Barrel & Key For Mag2/2P/4/4P.
ESP Auxiliary Isolator Relay Switch Red MAGAUXISORP
- Suitable for mains switching up to 8 amp
- Secure key switch enables safety for maintenance and offers protection against tamper
- External trigger option
- Programmable internal buzzer for activation
- Clear operation LED indication
- Surface or recess mount
ESP 24V Fire Alarm Door Holder DR916-24
- 200N holding force
- Available in 24 V dc or 230 V ac
- Zero Residual Force
- Approved to EN 1155
ESP 24Vdc 5 Amp Boxed Power Supply Fire BPS-5
- 24v 5 amp Boxed power supply
- Colour / Finish: White
ESP 24Vdc 2 Amp Boxed Power Supply Fire BPS-2
- 2 Amp Power Supply Unit with battery monitoring
- Mains supply 230V/240V 50Hz
- Maximum battery size 2 x 7Ah 12V S.L.A batteries
- Total output 2A at 27.6V DC
- Dimensions 275(h) x 330(w) x 80(d) mm
Hispec Universal Pattress HSSA/PA
Hispec Universal Pattress
Compatable with HSSA/PE & HSSA/HE
Aico Fire Alarm Control Switch Ei1529RC
- 230V mains powered unit
- For use with the Ei140RC and Ei160RC series of mains powered smoke and heat alarms
- Compatible with Ei261ENRC Carbon Monoxide alarms
- Complies with BS 415: 1990
- Easy installation with 3 core cable: live, neutral and interlink/control
- The locate option silences all the alarms except the initial activating alarm allowing easy identification of the source of the fire
- The test option will activate all the alarms
- The hush option will silence any false alarm
- Auto-reset within 10 minutes for locate and hush
Best sellers...
