Front Plates
Knightsbridge Screwless 2G Modular Faceplate – Matt Black SF2GMB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Curved edge 8G grid faceplate CUG8
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
8G Curved Edge Grid Faceplate
– Use in conjunction with 2 x CUG2F (sold separately)
– Supports 8 Curved Edge Grid Modules
– Includes screw cap covers
FOR USE WITH CURVED GRID SYSTEM ONLY
![Knightsbridge 8G grid faceplate [Part M Compliant] PMG8 - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/1110930-autocrop-1200x1198-1.png.webp "Knightsbridge 8G grid faceplate [Part M Compliant] PMG8 - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge 8G grid faceplate [Part M Compliant] PMG8
The Curved Edge range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M.
It is recommended that switches contrast with the front plate which in turn contrast with the wall. This range satisfies both recommendations. With a Light Reflectance Value (LRV) of approx. 8.9 (Part M recommends a contrast of 30% LRF between front plate and wall)
Benefits
– Inherent Anti-microbial properties – 3rd party tested
– Certified to all relevant British Safety standards
Features
– Use in conjunction with 2 x CUG2F (sold separately)
– Supports 8 Curved Edge grid modules
![Knightsbridge 6G grid faceplate [Part M Compliant] PMG6 - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/1110928-autocrop-1197x1200-1.png.webp "Knightsbridge 6G grid faceplate [Part M Compliant] PMG6 - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge 6G grid faceplate [Part M Compliant] PMG6
The Curved Edge range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M.
It is recommended that switches contrast with the front plate which in turn contrast with the wall. This range satisfies both recommendations. With a Light Reflectance Value (LRV) of approx. 8.9 (Part M recommends a contrast of 30% LRF between front plate and wall)
Benefits
– Inherent Anti-microbial properties – 3rd party tested
– Certified to all relevant British Safety standards
Features
– Use in conjunction with 2 x CUG2F (sold separately)
– Supports 6 Curved Edge grid modules
![Knightsbridge 4G grid faceplate [Part M Compliant] PMG4 - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/1110926-autocrop-1200x709-1.png.webp "Knightsbridge 4G grid faceplate [Part M Compliant] PMG4 - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge 4G grid faceplate [Part M Compliant] PMG4
The Curved Edge range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M.
It is recommended that switches contrast with the front plate which in turn contrast with the wall. This range satisfies both recommendations. With a Light Reflectance Value (LRV) of approx. 8.9 (Part M recommends a contrast of 30% LRF between front plate and wall)
Benefits
– Inherent Anti-microbial properties – 3rd party tested
– Certified to all relevant British Safety standards
Features
– Use in conjunction with 1 x CUG2F (sold separately)
– Supports 4 Curved Edge grid modules
![Knightsbridge 3G grid faceplate [Part M Compliant] PMG3 - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/1110924-autocrop-1200x708-1.png.webp "Knightsbridge 3G grid faceplate [Part M Compliant] PMG3 - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge 3G grid faceplate [Part M Compliant] PMG3
The Curved Edge range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M.
It is recommended that switches contrast with the front plate which in turn contrast with the wall. This range satisfies both recommendations. With a Light Reflectance Value (LRV) of approx. 8.9 (Part M recommends a contrast of 30% LRF between front plate and wall)
Benefits
– Inherent Anti-microbial properties – 3rd party tested
– Certified to all relevant British Safety standards
Features
– Use in conjunction with 1 x CUG2F (sold separately)
– Supports 3 Curved Edge grid modules
![Knightsbridge 2G grid faceplate [Part M Compliant] PMG2 - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/1110922-autocrop-1200x1197-1.png.webp "Knightsbridge 2G grid faceplate [Part M Compliant] PMG2 - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge 2G grid faceplate [Part M Compliant] PMG2
The Curved Edge range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M.
It is recommended that switches contrast with the front plate which in turn contrast with the wall. This range satisfies both recommendations. With a Light Reflectance Value (LRV) of approx. 8.9 (Part M recommends a contrast of 30% LRF between front plate and wall)
Benefits
– Inherent Anti-microbial properties – 3rd party tested
– Certified to all relevant British Safety standards
Features
– Use in conjunction with 1 x CUG1F (sold separately)
– Supports 2 Curved Edge grid modules
![Knightsbridge 1G grid faceplate [Part M Compliant] PMG1 - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/1110920-autocrop-1200x1198-1.png.webp "Knightsbridge 1G grid faceplate [Part M Compliant] PMG1 - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge 1G grid faceplate [Part M Compliant] PMG1
The Curved Edge range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M.
It is recommended that switches contrast with the front plate which in turn contrast with the wall. This range satisfies both recommendations. With a Light Reflectance Value (LRV) of approx. 8.9 (Part M recommends a contrast of 30% LRF between front plate and wall)
Benefits
– Inherent Anti-microbial properties – 3rd party tested
– Certified to all relevant British Safety standards
Features
– Use in conjunction with 1 x CUG1F (sold separately)
– Supports 1 Curved Edge grid module
Knightsbridge Modular Reading Light 50 x 50mm – White NETRLWH
Modular 50x50mm reading light solution with touch dimmer
– IP20 for indoor use only
– For use with euro modular faceplate solutions
– 2W LED reading light
– 3000K
– ON/OFF and touch dimming control on head unit
– Min mounting depth: 35mm
Knightsbridge Modular Reading Light 50 x 50mm – Grey NETRLGY
Modular 50x50mm reading light solution with touch dimmer
– IP20 for indoor use only
– For use with euro modular faceplate solutions
– 2W LED reading light
– 3000K
– ON/OFF and touch dimming control on head unit
– Min mounting depth: 35mm
Knightsbridge Modular Reading Light 50 x 50mm – Black NETRLBK
Modular 50x50mm reading light solution with touch dimmer
– IP20 for indoor use only
– For use with euro modular faceplate solutions
– 2W LED reading light
– 3000K
– ON/OFF and touch dimming control on head unit
– Min mounting depth: 35mm
Knightsbridge Flat Plate 4G modular faceplate – polished brass FP4GPB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 4G Modular Faceplate – Matt Black SF4GMB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 2G Modular Faceplate – Polished Brass SF2GPB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 1G Modular Faceplate – Polished Brass SF1GPB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts a single 25 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 1G Modular Faceplate – Polished Brass FP1GPB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts a single 25 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 2G Modular Faceplate – Polished Chrome SF2GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 1G Modular Faceplate – Polished Chrome SF1GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts a single 25 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 4G modular faceplate – polished chrome FP4GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 4G modular faceplate – gunmetal FP4GGM
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 2G Modular Faceplate – Black Nickel SF2GBN
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 4G Modular Faceplate – Bevelled Edge Polished Chrome CV4GPC
Accepts up to 4 x 25 x 50mm modules
Knightsbridge Flat Plate 2G modular faceplate – brushed brass FP2GBB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 1G Modular Faceplate – Brushed Brass FP1GBB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts a single 25 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 2G modular faceplate – polished brass FP2GPB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 2G modular faceplate – polished chrome FP2GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 1G Modular Faceplate – Polished Chrome FP1GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts a single 25 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 2G modular faceplate – brushed chrome FP2GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 4G Modular Faceplate – Polished Chrome SF4GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 4G Modular Faceplate – Brushed Chrome SF4GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 2G Modular Faceplate – Brushed Chrome SF2GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 1G Modular Faceplate – Brushed Chrome SF1GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts a single 25 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 2G Modular Faceplate – Rounded Edge Polished Chrome CL2GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Rounded edge metal design – Accepts two 25 x 50mm,or a single 50 x 50mm euro module – Rounded edge design with built in gasket – Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 4G modular faceplate – brushed brass FP4GBB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 4G modular faceplate – pearl FP4GPL
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 4G modular faceplate – brushed chrome FP4GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 4G Modular Faceplate – Polished Brass SF4GPB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 2G modular faceplate – pearl FP2GPL
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 1G Modular Faceplate – Pearl FP1GPL
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts a single 25 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 1G Modular Faceplate – Matt Black SF1GMB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts a single 25 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 1G Modular Faceplate – Black Nickel SF1GBN
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts a single 25 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 1G Modular Faceplate – Brushed Chrome FP1GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts a single 25 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 2G modular faceplate – gunmetal FP2GGM
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Flat Plate 1G Modular Faceplate – Gunmetal FP1GGM
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flat Plate low profile design
– Accepts a single 25 x 50mm euro module
– Ultra low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 4G Modular Faceplate – Matt White SF4GMW
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 1G Modular Faceplate – Matt White SF1GMW
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts a single 25 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 1G Modular Faceplate – Square Edge Antique Brass CS1GAB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Square edge metal design
– Accepts a single 25 x 50mm euro module
– Square edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 2G Modular Faceplate – Rounded Edge Brushed Chrome CL2GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Rounded edge metal design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Rounded edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Brush Module 100 x 50mm – White NETBR4GW
Euro-module design cable management brush module.
– Exclusive Knightsbridge Curved design
– 100 x 50mm
– Facilitates a tidy cable entry/exit from wall
– Ideal for hiding away unsightly cables and creating that floating TV look
NB: NOT INTENDED FOR US ALONGSIDE OTHER MODULES IN SAME FACE PLATE OR ALONGSIDE POWER SOCKETS IN SAME CHANNEL DUE TO POTENTIAL HAZARDOUS VOLTAGE THAT MAY BE PRESENT AND EASY TO REACH.
Knightsbridge Curved Edge 4G Modular Faceplate CU4G
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Single size suitable for 4 x 25 x 50mm or 2 x 50 x 50mm euro-module
– Used to house euro-module inserts to create bespoke TV/SAT/HDMI/USB solutions
– Includes screw cap covers
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 1G Modular Faceplate CU1G
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Single size suitable for 1 x 25 x 50mm euro-module
– Used to house euro-module inserts to create bespoke TV/SAT/HDMI/USB solutions
– Includes screw cap covers
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 2G Modular Faceplate CU2G
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Single size suitable for 2 x 25 x 50mm or 1 x 50 x 50mm euro-module
– Used to house euro-module inserts to create bespoke TV/SAT/HDMI/USB solutions
– Includes screw cap covers
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge 4G Modular Faceplate – Rounded Edge Brushed Chrome CL4GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Rounded edge metal design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Rounded edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 4G Modular Faceplate – White NET4GWH
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations.
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Metal Clad 1G Modular Faceplate M1G
Heavy duty metal clad design. Durable powder coated surface.
– Single size suitable for 1 x 25x50mm euro-module
– Used to house euro-module inserts to create bespoke TV/SAT/HDMI/USB/DATA solutions
– Supplied in Knightsbridge polybag
![Knightsbridge PM2G 2G Modular Faceplate [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/13de65e1-b128-4380-8a2f-ed328cd9ac7c-1.png.webp "Knightsbridge PM2G 2G Modular Faceplate [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge PM2G 2G Modular Faceplate [Part M Compliant]
2G Modular Faceplate [Part M Compliant]
![Knightsbridge PM1G 1G Modular Faceplate [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/a11f1bd7-80be-4176-ac0c-18afe4216af8-1.jpg.webp "Knightsbridge PM1G 1G Modular Faceplate [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge PM1G 1G Modular Faceplate [Part M Compliant]
1G Modular Faceplate [Part M Compliant]
![Knightsbridge PM4G 4G Modular Faceplate [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/37e46693-0480-4c6d-9f35-885cced710bb-1.png.webp "Knightsbridge PM4G 4G Modular Faceplate [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge PM4G 4G Modular Faceplate [Part M Compliant]
4G Modular Faceplate [Part M Compliant]
Knightsbridge Small Multimedia Combination Plate CU194MM
Small Multimedia Combination Plate
Knightsbridge Screwless RJ45 network outlet – Smoked Bronze
Screwless RJ45 network outlet – Smoked Bronze
Knightsbridge Screwless 9G grid faceplate – smoked bronze GDSF009SB
Screwless 9G grid faceplate – smoked bronze
Knightsbridge Screwless 9G grid faceplate – matt black GDSF009MB
Screwless 9G grid faceplate – matt black
Knightsbridge Screwless 9G grid faceplate – black nickel GDSF009BN
Screwless 9G grid faceplate – black nickel
Knightsbridge Screwless 9G grid faceplate – anthracite GDSF009AT
Screwless 9G grid faceplate – anthracite
Knightsbridge Screwless 8G grid faceplate – smoked bronze GDSF008SB
Screwless 8G grid faceplate – smoked bronze
Knightsbridge Screwless 8G grid faceplate – black nickel GDSF008BN
Screwless 8G grid faceplate – black nickel
Knightsbridge Screwless 8G grid faceplate – anthracite GDSF008AT
Screwless 8G grid faceplate – anthracite
Knightsbridge Screwless 6G grid faceplate – smoked bronze GDSF006SB
Screwless 6G grid faceplate – smoked bronze
Knightsbridge Screwless 6G grid faceplate – black nickel GDSF006BN
Screwless 6G grid faceplate – black nickel
Knightsbridge Screwless 6G grid faceplate – anthracite GDSF006AT
Screwless 6G grid faceplate – anthracite
Knightsbridge Screwless 4G Modular Faceplate – Smoked Bronze SF4GSB
Screwless 4G Modular Faceplate – Smoked Bronze
Knightsbridge Screwless 4G Modular Faceplate – Anthracite SF4GAT
Screwless 4G Modular Faceplate – Anthracite
Knightsbridge Screwless 4G grid faceplate – smoked bronze GDSF004SB
Screwless 4G grid faceplate – smoked bronze
Knightsbridge Screwless 4G grid faceplate – black nickel GDSF004BN
Screwless 4G grid faceplate – black nickel
Knightsbridge Screwless 4G grid faceplate – anthracite GDSF004AT
Screwless 4G grid faceplate – anthracite
Knightsbridge Screwless 3G grid faceplate – smoked bronze GDSF003SB
Screwless 3G grid faceplate – smoked bronze
Knightsbridge Screwless 3G grid faceplate – black nickel GDSF003BN
Screwless 3G grid faceplate – black nickel
Knightsbridge Screwless 3G grid faceplate – anthracite GDSF003AT
Screwless 3G grid faceplate – anthracite
Knightsbridge Screwless 2G Modular Faceplate – Smoked Bronze SF2GSB
Screwless 2G Modular Faceplate – Smoked Bronze
Knightsbridge Screwless 2G Modular Faceplate – Anthracite SF2GAT
Screwless 2G Modular Faceplate – Anthracite
Knightsbridge Screwless 2G grid faceplate – smoked bronze GDSF002SB
Screwless 2G grid faceplate – smoked bronze
Knightsbridge Screwless 2G grid faceplate – black nickel GDSF002BN
Screwless 2G grid faceplate – black nickel
Knightsbridge Screwless 2G grid faceplate – anthracite GDSF002AT
Screwless 2G grid faceplate – anthracite
Knightsbridge Screwless 1G Modular Faceplate – Smoked Bronze SF1GSB
Screwless 1G Modular Faceplate – Smoked Bronze
Knightsbridge Screwless 1G Modular Faceplate – Anthracite SF1GAT
Screwless 1G Modular Faceplate – Anthracite
Knightsbridge Screwless 1G grid faceplate – smoked bronze GDSF001SB
Screwless 1G grid faceplate – smoked bronze
Knightsbridge Screwless 1G grid faceplate – black nickel GDSF001BN
Screwless 1G grid faceplate – black nickel
Knightsbridge Screwless 1G grid faceplate – anthracite GDSF001AT
Screwless 1G grid faceplate – anthracite
Knightsbridge Screwless 12G grid faceplate – smoked bronze GDSF012SB
Screwless 12G grid faceplate – smoked bronze
Knightsbridge Screwless 12G grid faceplate – matt black GDSF012MB
Screwless 12G grid faceplate – matt black
Knightsbridge Screwless 12G grid faceplate – black nickel GDSF012BN
Screwless 12G grid faceplate – black nickel
Knightsbridge Screwless 12G grid faceplate – anthracite GDSF012AT
Screwless 12G grid faceplate – anthracite
Knightsbridge Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Anthracite SFR192RAT
Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Anthracite
Knightsbridge Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Brushed Chrome SFR192RBCW
Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Brushed Chrome
Knightsbridge Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Matt Black SFR192RMBB
Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Matt Black
Knightsbridge Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Matt White SFR192RMW
Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Matt White
Knightsbridge Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Smoked Bronze SFR192RSB
Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Smoked Bronze
Knightsbridge Screwless Small Multimedia Combination Plate – Brushed Chrome SFR194BCW
Screwless Small Multimedia Combination Plate – Brushed Chrome
Knightsbridge Screwless 13A 2G DP Socket with USB Fastcharge + 2G Modular Combination Plate – Brushed Chrome SFR992RBCW
Screwless 13A 2G DP Socket with USB Fastcharge + 2G Modular Combination Plate – Brushed Chrome
Knightsbridge Screwless Small Multimedia Combination Plate with FASTCHARGE – Brushed Chrome SFR994BCW
Screwless Small Multimedia Combination Plate with FASTCHARGE – Brushed Chrome
Knightsbridge 12G grid faceplate – antique brass GDCS12AB
12G grid faceplate – antique brass
Knightsbridge 1G grid faceplate – antique brass GDCS1AB
1G grid faceplate – antique brass
Knightsbridge 2G grid faceplate – antique brass GDCS2AB
2G grid faceplate – antique brass
Knightsbridge 3G grid faceplate – antique brass GDCS3AB
3G grid faceplate – antique brass
Knightsbridge 4G grid faceplate – antique brass GDCS4AB
4G grid faceplate – antique brass
Knightsbridge 6G grid faceplate – antique brass GDCS6AB
6G grid faceplate – antique brass
Knightsbridge 8G grid faceplate – antique brass GDCS8AB
8G grid faceplate – antique brass
Knightsbridge 9G grid faceplate – antique brass GDCS9AB
9G grid faceplate – antique brass
Knightsbridge 1G grid faceplate – brushed brass GDFP001BB
1G grid faceplate – brushed brass
Knightsbridge 2G grid faceplate – brushed brass GDFP002BB
2G grid faceplate – brushed brass
Knightsbridge 3G grid faceplate – brushed brass GDFP003BB
3G grid faceplate – brushed brass
Knightsbridge 4G grid faceplate – brushed brass GDFP004BB
4G grid faceplate – brushed brass
Knightsbridge 6G grid faceplate – brushed brass GDFP006BB
6G grid faceplate – brushed brass
Knightsbridge 8G grid faceplate – brushed brass GDFP008BB
8G grid faceplate – brushed brass
Knightsbridge 9G grid faceplate – brushed brass GDFP009BB
9G grid faceplate – brushed brass
Knightsbridge 12G grid faceplate – brushed brass GDFP012BB
12G grid faceplate – brushed brass
Knightsbridge 1G Brush faceplate (assembled) NETBRUSH2
Facilitates tidy cable management through walls
Ideal for achieving the floating TV look
86 x 86mm
*Cables not included
Knightsbridge 2G Brush faceplate (assembled) NETBRUSH4
Facilitates tidy cable management through walls
Ideal for achieving the floating TV look
147 x 86mm
*Cables not included
Knightsbridge Screwless 6G Modular Faceplate (2G + 4G) – Anthracite SF6GAT
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module (2G position)
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both (4G position)
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 6G Modular Faceplate (2G + 4G) – Brushed Chrome SF6GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module (2G position)
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both (4G position)
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 6G Modular Faceplate (2G + 4G) – Black Nickel SF6GBN
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module (2G position)
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both (4G position)
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 6G Modular Faceplate (2G + 4G) – Matt Black SF6GMB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module (2G position)
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both (4G position)
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 6G Modular Faceplate (2G + 4G) – Matt White SF6GMW
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module (2G position)
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both (4G position)
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 6G Modular Faceplate (2G + 4G) – Polished Brass SF6GPB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module (2G position)
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both (4G position)
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 6G Modular Faceplate (2G + 4G) – Polished Chrome SF6GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module (2G position)
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both (4G position)
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 6G Modular Faceplate (2G + 4G) – Smoked Bronze SF6GSB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module (2G position)
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both (4G position)
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless Small Multimedia Combination Plate – Anthracite SFR194AT
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 1 x 2G Double Sockets with Twin Earth
– Space for up to 4 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Small Multimedia Combination Plate – Matt Black SFR194MBB
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 1 x 2G Double Sockets with Twin Earth
– Space for up to 4 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Small Multimedia Combination Plate – Matt White SFR194MW
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 1 x 2G Double Sockets with Twin Earth
– Space for up to 4 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Small Multimedia Combination Plate – Smoked Bronze SFR194SB
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 1 x 2G Double Sockets with Twin Earth
– Space for up to 4 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Combination Plate – Anthracite SFR298AT
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Combination Plate – Brushed Chrome with black insert SFR298BC
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Combination Plate – Brushed Chrome with grey insert SFR298BCG
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Combination Plate – Brushed Chrome with white insert SFR298BCW
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Combination Plate – Matt Black SFR298MBB
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Combination Plate – Matt White SFR298MW
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Combination Plate – Smoked Bronze SFR298SB
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Small Multimedia Combination Plate with FASTCHARGE – Anthracite SFR994AT
Essential for any major upgrade, renovation or new build. The Screwless Small Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Space for up to 4 x Euro module inserts (25x50mm)
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Small Multimedia Combination Plate with FASTCHARGE – Matt Black SFR994MBB
Essential for any major upgrade, renovation or new build. The Screwless Small Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Space for up to 4 x Euro module inserts (25x50mm)
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Small Multimedia Combination Plate with FASTCHARGE – Matt White SFR994MW
Essential for any major upgrade, renovation or new build. The Screwless Small Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Space for up to 4 x Euro module inserts (25x50mm)
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Small Multimedia Combination Plate with FASTCHARGE – Smoked Bronze SFR994SB
Essential for any major upgrade, renovation or new build. The Screwless Small Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Space for up to 4 x Euro module inserts (25x50mm)
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Combination Plate with Dual USB FASTCHARGE A+C – Anthracite SFR998AT
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W.
Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W.
If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Combination Plate with Dual USB FASTCHARGE A+C – Brushed Chrome with black insert SFR998BC
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Combination Plate with Dual USB FASTCHARGE A+C – Brushed Chrome with grey insert SFR998BCG
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Combination Plate with Dual USB FASTCHARGE A+C – Brushed Chrome with white insert SFR998BCW
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Combination Plate with Dual USB FASTCHARGE A+C – Matt Black SFR998MBB
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Combination Plate with Dual USB FASTCHARGE A+C – Matt White SFR998MW
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Combination Plate with Dual USB FASTCHARGE A+C – Smoked Bronze SFR998SB
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Multimedia Combination Plate CU298MM
Essential for any major upgrade, renovation or new build. The Curved Edge Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
– Dimensions: (H) 175mm x (W) 295mm x (P) 7mm
Knightsbridge 8G Grid Faceplate – Rounded Edge Polished Chrome GDCL8PC
Designed and finished to coordinate with the Rounded Edge Polished Chrome Switches and Sockets range.
8G Rounded Edge Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 6G Grid Faceplate – Rounded Edge Polished Chrome GDCL6PC
Designed and finished to coordinate with the Rounded Edge Polished Chrome Switches and Sockets range.
6G Rounded Edge Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 4G Grid Faceplate – Rounded Edge Polished Chrome GDCL4PC
Designed and finished to coordinate with the Rounded Edge Polished Chrome Switches and Sockets range.
4G Rounded Edge Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 3G Grid Faceplate – Rounded Edge Polished Chrome GDCL3PC
Designed and finished to coordinate with the Rounded Polished Chrome Switches and Sockets range.
3G Rounded Edge Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 2G Grid Faceplate – Rounded Edge Polished Chrome GDCL2PC
Designed and finished to coordinate with the Rounded Edge Polished Chrome Switches and Sockets range.
2G Rounded Edge Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 1G Grid Faceplate – Rounded Edge Polished Chrome GDCL1PC
Designed and finished to coordinate with the Rounded Polished Chrome Switches and Sockets range.
1G Rounded Edge Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 4G Modular Faceplate – Rounded Edge Brushed Chrome CL4GPC
4G Modular Faceplate – Rounded Edge Polished Chrome
Knightsbridge 1G Modular Faceplate – Rounded Edge Polished Chrome CL1GPC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Rounded edge metal design
– Accepts a single 25 x 50mm euro module
– Rounded edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 8G grid faceplate – matt black GDSF008MB
Designed and finished to coordinate with the Screwless Switches and Sockets range.
8G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS003F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 6G grid faceplate – matt black GDSF006MB
Designed and finished to coordinate with the Screwless Switches and Sockets range.
6G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS003F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 4G grid faceplate – matt black GDSF004MB
Designed and finished to coordinate with the Screwless Switches and Sockets range.
4G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS002F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 3G grid faceplate – matt black GDSF003MB
Designed and finished to coordinate with the Screwless Switches and Sockets range.
3G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS002F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 2G grid faceplate – matt black GDSF002MB
Designed and finished to coordinate with the Screwless Switches and Sockets range.
2G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS001F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 1G grid faceplate – matt black GDSF001MB
Designed and finished to coordinate with the Screwless Switches and Sockets range.
1G Screwless Grid Faceplate
– Use in conjunction with 1 sx GDS001F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge 8G Grid Faceplate – Rounded Edge Brushed Chrome GDCL8BC
Designed and finished to coordinate with the Rounded Edge Brushed Chrome Switches and Sockets range.
8G Rounded Edge Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 12G Grid Faceplate – Square Edge Brushed Chrome GDCS12BC
Designed and finished to coordinate with the Square Edge Brushed Chrome Switches and Sockets range.
12G Square Edge Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 9G Grid Faceplate – Square Edge Brushed Chrome GDCS9BC
Designed and finished to coordinate with the Square Edge Brushed Chrome Switches and Sockets range.
9G Square Edge Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 8G Grid Faceplate – Square Edge Brushed Chrome GDCS8BC
Designed and finished to coordinate with the Square Edge Brushed Chrome Switches and Sockets range.
8G Square Edge Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 6G Grid Faceplate – Square Edge Brushed Chrome GDCS6BC
Designed and finished to coordinate with the Square Edge Brushed Chrome Switches and Sockets range.
6G Square Edge Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 4G Grid Faceplate – Square Edge Brushed Chrome GDCS4BC
Designed and finished to coordinate with the Square Edge Brushed Chrome Switches and Sockets range.
4G Square Edge Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 3G Grid Faceplate – Square Edge Brushed Chrome GDCS3BC
Designed and finished to coordinate with the Square Edge Brushed Chrome Switches and Sockets range.
3G Square Edge Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 2G Grid Faceplate – Square Edge Brushed Chrome GDCS2BC
Designed and finished to coordinate with the Square Edge Brushed Chrome Switches and Sockets range.
2G Square Edge Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 1G Grid Faceplate – Square Edge Brushed Chrome GDCS1BC
Designed and finished to coordinate with the Square Edge Brushed Chrome Switches and Sockets range.
1G Square Edge Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 4G Modular Faceplate – Square Edge Brushed Chrome CS4GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Square edge metal design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Square edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 2G Modular Faceplate – Square Edge Brushed Chrome CS2GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Square edge metal design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Square edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 1G Modular Faceplate – Square Edge Brushed Chrome CS1GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Square edge metal design
– Accepts a single 25 x 50mm euro module
– Square edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 12G Grid Faceplate – Rounded Edge Brushed Chrome GDCL12BC
Designed and finished to coordinate with the Rounded Edge Brushed Chrome Switches and Sockets range.
12G Rounded Edge Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 9G Grid Faceplate – Rounded Edge Brushed Chrome GDCL9BC
Designed and finished to coordinate with the Rounded Edge Brushed Chrome Switches and Sockets range.
9G Rounded Edge Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 6G Grid Faceplate – Rounded Edge Brushed Chrome GDCL6BC
Designed and finished to coordinate with the Rounded Edge Brushed Chrome Switches and Sockets range.
6G Rounded Edge Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 4G Grid Faceplate – Rounded Edge Brushed Chrome GDCL4BC
Designed and finished to coordinate with the Rounded Edge Brushed Chrome Switches and Sockets range.
4G Rounded Edge Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 3G Grid Faceplate – Rounded Edge Brushed Chrome GDCL3BC
Designed and finished to coordinate with the Rounded Brushed Chrome Switches and Sockets range.
3G Rounded Edge Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 2G Grid Faceplate – Rounded Edge Brushed Chrome GDCL2BC
Designed and finished to coordinate with the Rounded Edge Brushed Chrome Switches and Sockets range.
2G Rounded Edge Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge 1G Grid Faceplate – Rounded Edge Brushed Chrome GDCL1BC
Designed and finished to coordinate with the Rounded Brushed Chrome Switches and Sockets range.
1G Rounded Edge Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold separately)
FOR USE WITH KNIGHTSBRIDGE GRID SYSTEM ONLY
Knightsbridge Screwless 12G grid faceplate – polished chrome GDSF012PC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
12G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS004F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 9G grid faceplate – polished chrome GDSF009PC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
9G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS004F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Flat plate 12G grid faceplate – polished chrome GDFP012PC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
12G Flat Plate Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 12G grid faceplate – brushed chrome GDFP012BC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
12G Flat Plate Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 9G grid faceplate – polished chrome GDFP009PC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
9G Flat Plate Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 9G grid faceplate – brushed chrome GDFP009BC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
9G Flat Plate Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Screwless 8G grid faceplate – polished chrome GDSF008PC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
8G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS003F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 6G grid faceplate – polished chrome GDSF006PC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
6G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS003F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Flat plate 8G grid faceplate – polished chrome GDFP008PC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
8G Flat Plate Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 8G grid faceplate – brushed chrome GDFP008BC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
8G Flat Plate Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 6G grid faceplate – polished chrome GDFP006PC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
6G Flat Plate Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 6G grid faceplate – brushed chrome GDFP006BC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
6G Flat Plate Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Screwless 4G grid faceplate – polished chrome GDSF004PC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
4G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS002F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 3G grid faceplate – polished chrome GDSF003PC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
3G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS002F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Flat plate 4G grid faceplate – polished chrome GDFP004PC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
4G Flat Plate Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 4G grid faceplate – brushed chrome GDFP004BC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
4G Flat Plate Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 3G grid faceplate – polished chrome GDFP003PC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
3G Flat Plate Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 3G grid faceplate – brushed chrome GDFP003BC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
3G Flat Plate Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Curved edge 12G grid faceplate CUG12
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
12G Curved Edge Grid Faceplate
– Use in conjunction with 3 x CUG2F (sold separately)
– Supports 12 Curved Edge Grid Modules
– Includes screw cap covers
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge 4G Modular Faceplate – Square Edge Antique Brass CS4GAB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Square edge metal design
– Accepts four 25 x 50mm , or two 50 x 50mm euro module or a combination of both
– Square edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 2G grid faceplate – polished chrome GDSF002PC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
2G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS001F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 1G grid faceplate – polished chrome GDSF001PC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
1G Screwless Grid Faceplate
– Use in conjunction with 1 sx GDS001F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Metal Clad 2G Modular Faceplate M2G
Heavy duty metal clad design. Durable powder coated surface.
– Single size suitable for 2 x 25x50mm or 1 x 50x50mm euro-module
– Used to house euro-module inserts to create bespoke TV/SAT/HDMI/USB/DATA solutions
– Supplied in Knightsbridge polybag
Knightsbridge Screwless 2G Modular Faceplate – Matt White SF2GMW
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Flawless Screwless design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Screwless low profile design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 2G Modular Faceplate – Square Edge Antique Brass CS2GAB
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Square edge metal design
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Square edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge 1G Modular Faceplate – Rounded Edge Brushed Chrome CL1GBC
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations. Rounded edge metal design
– Accepts a single 25 x 50mm euro module
– Rounded edge design with built in gasket
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 1G grid faceplate – matt white GDSF001MW
Designed and finished to coordinate with the Screwless Switches and Sockets range.
1G Screwless Grid Faceplate
– Use in conjunction with 1 sx GDS001F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Flat plate 2G grid faceplate – polished chrome GDFP002PC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
2G Flat Plate Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 2G grid faceplate – brushed chrome GDFP002BC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
2G Flat Plate Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY .
Knightsbridge Flat plate 1G grid faceplate – polished chrome GDFP001PC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
1G Flat Plate Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY
Knightsbridge Flat plate 1G grid faceplate – brushed chrome GDFP001BC
Designed and finished to coordinate with the Flat Plate Switches and Sockets range.
1G Flat Plate Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold seperately)
FOR USE WITH FLAT PLATE GRID SYSTEM ONLY
Knightsbridge Metalclad 9G grid faceplate GDFP009M
Designed and finished to coordinate with the Metal Clad Switches and Sockets range.
9G Metalclad Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold separately)
FOR USE WITH METALCLAD GRID SYSTEM ONLY
Knightsbridge Metalclad 12G grid faceplate GDFP0012M
Designed and finished to coordinate with the Metal Clad Switches and Sockets range.
12G Metalclad Grid Faceplate
– Use in conjunction with 3 x GDF002F (sold separately)
FOR USE WITH METALCLAD GRID SYSTEM ONLY
Knightsbridge Curved edge 6G grid faceplate CUG6
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
6G Curved Edge Grid Faceplate
– Use in conjunction with 2 x CUG2F (sold separately)
– Supports 6 Curved Edge Grid Modules
– Includes screw cap covers
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Metalclad 8G grid faceplate GDFP008M
Designed and finished to coordinate with the Metal Clad Switches and Sockets range.
8G Metalclad Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold separately)
FOR USE WITH METALCLAD GRID SYSTEM ONLY
Knightsbridge Metalclad 6G grid faceplate GDFP006M
Designed and finished to coordinate with the Metal Clad Switches and Sockets range.
6G Metalclad Grid Faceplate
– Use in conjunction with 2 x GDF002F (sold separately)
FOR USE WITH METALCLAD GRID SYSTEM ONLY
Knightsbridge Metalclad 4G grid faceplate GDFP004M
Designed and finished to coordinate with the Metal Clad Switches and Sockets range.
4G Metalclad Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold separately)
FOR USE WITH METALCLAD GRID SYSTEM ONLY
Knightsbridge Metalclad 3G grid faceplate GDFP003M
Designed and finished to coordinate with the Metal Clad Switches and Sockets range.
3G Metalclad Grid Faceplate
– Use in conjunction with 1 x GDF002F (sold separately)
FOR USE WITH METALCLAD GRID SYSTEM ONLY
Knightsbridge Curved edge 4G grid faceplate CUG4
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
4G Curved Edge Grid Faceplate
– Use in conjunction with 1 x CUG2F (sold separately)
– Supports 4 Curved Edge Grid Modules
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Curved edge 3G grid faceplate CUG3
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
3G Curved Edge Grid Faceplate
– Use in conjunction with 1 x CUG2F (sold separately)
– Supports 3 Curved Edge Grid Modules
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Metalclad 2G grid faceplate GDFP002M
Designed and finished to coordinate with the Metal Clad Switches and Sockets range.
2G Metalclad Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold separately)
FOR USE WITH METALCLAD GRID SYSTEM ONLY
Knightsbridge Metalclad 1G grid faceplate GDFP001M
Designed and finished to coordinate with the Metal Clad Switches and Sockets range.
1G Metalclad Grid Faceplate
– Use in conjunction with 1 x GDF001F (sold separately)
FOR USE WITH METALCLAD GRID SYSTEM ONLY
Knightsbridge 2G Modular Faceplate – White NET2GWH
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations.
– Accepts two 25 x 50mm , or a single 50 x 50mm euro module
– Minimum mounting box depth: dependent on euro module used
Knightsbridge Screwless 12G grid faceplate – brushed chrome GDSF012BC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
12G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS004F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 9G grid faceplate – brushed chrome GDSF009BC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
9G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS004F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 8G grid faceplate – brushed chrome GDSF008BC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
8G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS003F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 6G grid faceplate – brushed chrome GDSF006BC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
6G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS003F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 12G grid faceplate – matt white GDSF012MW
Designed and finished to coordinate with the Screwless Switches and Sockets range.
12G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS004F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 9G grid faceplate – matt white GDSF009MW
Designed and finished to coordinate with the Screwless Switches and Sockets range.
9G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS004F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 8G grid faceplate – matt white GDSF008MW
Designed and finished to coordinate with the Screwless Switches and Sockets range.
8G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS003F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 6G grid faceplate – matt white GDSF006MW
Designed and finished to coordinate with the Screwless Switches and Sockets range.
6G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS003F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 4G grid faceplate – brushed chrome GDSF004BC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
4G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS002F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 3G grid faceplate – brushed chrome GDSF003BC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
3G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS002F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 4G grid faceplate – matt white GDSF004MW
Designed and finished to coordinate with the Screwless Switches and Sockets range.
4G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS002F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 3G grid faceplate – matt white GDSF003MW
Designed and finished to coordinate with the Screwless Switches and Sockets range.
3G Screwless Grid Faceplate
– Use in conjunction with 1 x GDS002F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 2G grid faceplate – brushed chrome GDSF002BC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
2G Screwless Grid Faceplate
– Use in conjunction with 1 sx GDS001F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 1G grid faceplate – brushed chrome GDSF001BC
Designed and finished to coordinate with the Screwless Switches and Sockets range.
1G Screwless Grid Faceplate
– Use in conjunction with 1 sx GDS001F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Screwless 2G grid faceplate – matt white GDSF002MW
Designed and finished to coordinate with the Screwless Switches and Sockets range.
2G Screwless Grid Faceplate
– Use in conjunction with 1 sx GDS001F (sold seperately)
FOR USE WITH SCREWLESS GRID SYSTEM ONLY
Knightsbridge Curved edge 2G grid faceplate CUG2
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
2G Curved Edge Grid Faceplate
– Use in conjunction with 1 x CUG1F (sold separately)
– Supports 2 Curved Edge Grid Modules
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Curved edge 1G grid faceplate CUG1
Designed and finished to coordinate with the Curved Edge Switches & Sockets range.
1G Curved Edge Grid Faceplate
– Use in conjunction with 1 x CUG1F (sold separately)
– Supports 1 Curved Edge Grid Module
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge 1G Modular Faceplate – White NET1GWH
Suitable for use with euro module inserts. Ideal for creating bespoke TV/DATA/HDMI/USB/TEL installations.
– Accepts a single 25 x 50mm euro module
– Minimum mounting box depth: dependent on euro module used
Best sellers...
