Kitchen Lighting
Knightsbridge 230V 9W LED Linkable Striplight 3000K (538mm) UCLED9WW
230V 9W mains voltage ultra slim LED link lights.
Ideal for kitchen, cabinet and cove-lighting, as well as retail applications.
– Complete with 2m power cord, small coupler/ connector and fixing clips
– Link-able end to end by coupler or using link leads (not included)
– Simple to install
– Independently switched
– Mountable on horizontally as well as vertically
– Max. 12 fittings to be connected together
3000K, Warm White, 640lm
Knightsbridge 230V 7W LED Linkable Striplight 4000K (395mm) UCLED7CW
230V 7W mains voltage ultra slim LED link lights.
Ideal for kitchen, cabinet and cove-lighting, as well as retail applications
– Complete with 2m power cord, small coupler/ connector and fixing clips
– Link-able end to end by coupler or using link leads (not included)
– Simple to install
– Independently switched
– Mountable horizontally as well as vertically
– Max. 12 fittings to be connected together
4000K, Cool White, 570lm
Knightsbridge 10AX 2-Way Pull Cord Switch – Polished Chrome 8300PC
Ideal for bathrooms and utility rooms.
– 10AX rated
– 2-way
– With approx. 1.5m pull cord
– Polished chrome finish with matching pull cord tip
– Certified to EN 60669-1
Knightsbridge 230V 4W LED Linkable Striplight 3000K (277mm) UCLED4WW
230V 4W mains voltage ultra slim LED link lights.
Ideal for kitchen, cabinet and cove-lighting, as well as retail applications.
– Complete with 2m power cord, small coupler/ connector and fixing clips
– Link-able end to end by coupler or using link leads (not included)
– Simple to install
– Independently switched
– Mountable on horizontally as well as vertically
– Max. 12 fittings to be connected together
3000K, Warm White, 310lm
Knightsbridge 12/24V DC 8-Way PVC Splitter LED8SPLIT
For use with LED Flat & Triangular striplights
Maximum of 8 lights per splitter
Knightsbridge Power Cable 2m UCP200
Mains Power feed cable 3 core flex 2000mm for Power feed to side of LED Under cabinet fitting
Knightsbridge 9″ T2 BC Pendant Set – 3-Plate SN8280
Pendant lamp holder. Pre-wired to reduce time on installation.
– T2 rated 100W Incandescent / Max. 8W LED
– Fixed drop
– Short skirt
– Pre-wired
– Terminal capacity: 2 x 1.5mm²
– Certified to BS EN 60589-2-1, BS EN 60598-1
– Supplied in rip top Knightsbridge polybag with euro slot
Knightsbridge T2 HO BC Batten Holder with Ceiling Rose Base 3-plate SN8230
– T2 rated 100W Incandescent / Max. 8W LED
– 3 terminal
– BC type loop-in Batten lampholder
– Home Office Skirt
– Ceiling rose base
– Terminal capacity: 2 x 1.5mm²
– Certified to BS EN 61184, EN 62471
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge 10A 2-Way Pull Cord switch SN8300
Ideal for bathrooms and utility rooms.
– 10AX rated
– 2-way
– With approx. 1.7m pull cord
– Certified to EN 60669-1
– Supplied in rip top Knightsbridge polybag with euro slot
Knightsbridge 12/24V DC Linking Power Lead for LED Striplights (2500mm) LED2500
Use to connect two striplights
Knightsbridge 24V DC PVC Right Angle Connector for LED Linkable Flat Striplights LEDRACON
Right angled connector required to connect two flat striplights together
Knightsbridge Ceiling Rose 3-plate SN8260
– Ceiling rose with integral terminal block
– Terminal capacity: 2 x 1.5mm²
Knightsbridge T2 HO Batten Holder BC 3-Terminals SN8200
– T2 rated 100W Incandescent / Max. 8W LED
– 3 terminal
– BC type lampholder
– Home Office Skirt
– Terminal capacity: 2 x 1.5mm²
– Certified to BS EN 61184, EN 62471
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Metal Mounting Clip comes with 2 x Screws for Triangular LED Strip LEDTCLIP
The triangular LED strip clicks into this metal mounting clip for under cabinet corner use (c/w 2 clips and 2 screws).
Knightsbridge Metal Mounting Clip comes with 2 x Screws for Flat LED Strip LEDFCLIP
The flat LED strip clicks into this metal mounting clip for under cabinet use (c/w 2 clips and 2 screws)
Knightsbridge 12/24V DC Linking Power Lead for LED Striplights (1000mm) LED1000
Use to connect two striplights
Knightsbridge 24V DC PVC Connector for LED Triangular Striplights LEDTCON
Connector required to connect two triangular striplights together.
Knightsbridge T2 Straight Short Skirt BC Batten Holder 3-Terminals SN8210
– T2 rated 100W Incandescent / Max. 8W LED
– 3 terminal
– BC type loop-in Batten lampholder
– Short Skirt
– Terminal capacity: 2 x 1.5mm²
– Certified to BS EN 61184, EN 62471
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge Coupler – LED under cabinet UCCUP
Seamless Coupler for Joining together 2 LED under cabinet fittings.
Knightsbridge 12/24V DC Linking Power Lead for LED Striplights (250mm) LED250
Use to connect two striplights
Best sellers...
Knightsbridge SpektroLED Evo IP65 8W Fire-rated Smart Downlight RGB and CCT – Fixed
Knightsbridge IP65 7W LED 3000K Warm White Downlight with White Round Bezel VFRCOBAWW
Knightsbridge 230V IP65 3W LED Emergency Bulkhead Maintained/Non- Maintained EMLED4L
