Knightsbridge
Knightsbridge Curved edge 3G grid faceplate CUG3
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
3G Curved Edge Grid Faceplate
– Use in conjunction with 1 x CUG2F (sold separately)
– Supports 3 Curved Edge Grid Modules
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge RW6 Matt Black Flat Bezel RW6FMB
Flat bezel in Matt Black
Compatible with RW IP65 Downlights
Knightsbridge RW6 Matt White Bezel RW6MW
Matt White Bezel
Compatible with RW IP65 Downlights
Knightsbridge RW6 Matt Black Bezel RW6MB
Matt Black Bezel
Compatible with RW IP65 Downlights
Knightsbridge PACK OF 10 – Quarter Blanking Modules (12.5 x 50mm) – Grey NETQGY
Pack of 10 quarter blanking plates
– 12.5 x 50mm
– For spacing or blanking out unused modular positions in a modular faceplate
Knightsbridge PACK OF 10 – Quarter Blanking Modules (12.5 x 50mm) – Black NETQBK
Pack of 10 quarter blanking plates
– 12.5 x 50mm
– For spacing or blanking out unused modular positions in a modular faceplate
Knightsbridge PACK OF 10 – Quarter Blanking Modules (12.5 x 50mm) – White NETQWH
Pack of 10 quarter blanking plates
– 12.5 x 50mm
– For spacing or blanking out unused modular positions in a modular faceplate
Knightsbridge 1G Plate with 2 x Dimmer Caps SN2DIM
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 2 position plate with matching dimmer cap
– Suitable for mounting Knightsbridge dimmer modules or other after-market dimmer modules for a bespoke solution.
– Includes screw cap covers
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Double 47mm Pattress Box with Earth Terminal SN1600
Square Edge for use with the Knightsbridge Square Edge (SN) series of wiring accessories, also suitable for general purpose use.
– Double size
– 47mm
– With earth terminal
– With cable strain relief
– Supplied bulk packed in Knightsbridge inner cartons
Knightsbridge 35mm Single + Double Dry Lining Box SN8335D
White, plastic dry lining box. For mounting electrics into dry-lined cavity walls.
– 35mm
– 2 x 20mm knock out at rear
– Cable entry channels top and bottom
– Certified to BS 5733
– Supplied in shrink-sealed Knightsbridge multipacks
Knightsbridge 13A 1G SP Switched Socket – ASTA approved SN7000S
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Single Pole
– Includes screw cap covers
– Min. mounting box depth: 25mm
– Certified to BS 1363-2:2016+A1:2018
– ASTA approved License No. 1412
– Packed in individual Knightsbridge rip top polybag with euro slot
Knightsbridge UTP CAT5e RJ45 Outlet Module 25 x 50mm – Grey NETCAT5GY
Networking outlet suitable for use with euro-module faceplates.
– 25 x 50mm
– UTP CAT5e
– RJ45 socket
– IDC terminals
Knightsbridge 30A Junction Box 3-Terminal – Black (89mm) SN8430B
30A Junction box
– 30A rated
– Selective entry
– 3 terminals
– 89mm diameter
– Black
– Urea constructed outer casing
– Certified to BS EN 60670
Knightsbridge 30A Junction Box 3-Terminal – White (89mm) SN8430
30A Junction box
– 30A rated
– Selective entry
– 3 terminals
– 89mm diameter
– White
– Urea constructed outer casing
– Certified to BS EN 60670
Knightsbridge 24V DC PVC Right Angle Connector for LED Linkable Flat Striplights LEDRACON
Right angled connector required to connect two flat striplights together
Knightsbridge 1G-2G mounting frame CUG1F
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– 1G-2G mounting frame
– For use with 1G and 2G Curved Edge Grid Faceplates
– Mounting screws pre-fitted
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge 5m UTP CAT6 Networking Cable – Black NETC65M
CAT6 is the latest generation of Gigabit Ethernet technology. It supports speeds of up to 100Mbps, gigabit speeds up to 1000Mbps and the latest 10GbE standards.
– RJ45 plug to plug,
– Over moulded connectors with strain relief to ensure minimal bend radius
– Snag free design
– Ideal for connecting PC, MAC, Laptops, SMART TV’s and other network devices to a network or modem router/ Switch for network connection
Knightsbridge 6A DP Inline Cord Switch – White ST6AWH
Compact, re-wireable inline cord switch for low wattage lamps / table lamps.
– 6A 230V
– Double Pole
– Suitable for 2 or 3 core lighting cable
– Terminal capacity: 0.75-1.5mm
– Certified to BS EN 61058
– Supplied in Knightsbridge polybag
Knightsbridge GU10 Lampholder with Bridge LH03
GU10 Lamp Holder with Bridge & Separate Earth Terminal
Knightsbridge Switch cover “marked WASHING MACHINE” – polished chrome GDWASHPC
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Best sellers...
SANGAMO ESP Wireless Programmable Thermostat with Digital Display in Black CHPRSTATDPRFB
