Modules
Hikvision Rose back-up system, No USB Rose-Replicator-Plus-3-years-No-USB
SKU: Rose-Replicator-Plus-3-years-No-USB
THIS PRODUCT CAN ONLY BE PURCHASED IF HIKCENTRAL TRAINING HAS BEEN UNDERTAKEN WITH HIKVISION
Rose back-up system, mainly used for 1+1 VMS servers backup and only used locally. This license key is in Non-USB mode, with 3 years warranty and upgrade support. Customers need to provide the system ID of Rose after iinstallation, to get license key.
Hikvision Optimus core module for alarm system integration OPTIMUS-CONNECTOR-ALARM
SKU: OPTIMUS-CONNECTOR-ALARM
Optimus core module for alarm system integration, which can support Honeywell Galaxy connector for intruder detection without device number limit
Hikvision Optimus core module for access control system integration Optimus-Connector-AccessControl
SKU: Optimus-Connector-AccessControl
Optimus core module for access control system integration, which can support Paxton, AMAG, SaltoSpace, Nedap, ACT, CDVI, Brivo
Hikvision HikCentral pStor picture storage base package without camera number limit. pStor-Picture-Storage-Base
SKU: pStor-Picture-Storage-Base
HikCentral pStor picture storage base package without camera number limit.
Deltabell Plus Module with LED Backlight FPDELTAP2MOD
SKU: FPDELTAP2MOD
- Pyronix External Sounder Deltabell Plus Module
- Backlit illuminated external sounder
- Polycarbonate weather proof base
- Excellent deterrent
- LED low power strobe
- Superior tamper protection
EV-AD2 Programmer plus EV-AVADAPT & Universal Lead Nittan-EV-AD2-Programming-Kit
SKU: Nittan-EV-AD2-Programming-Kit
This kit contains:
EV-AD2 Handheld Programmer
Universal Programming Lead
EV-AVADAPT Programming Adaptor Plate
Key Features
> Handheld address programmer
> Battery/18V DC powered
> Simple operation
> Robust design
> Programmer lead port for modules
Three Input – Three Output module (Loop Powered), c/w -ve SCI and 1x mains rated output EV-3IO
SKU: EV-3IO
The Nittan EV-3IO is a Triple Input / Output module, with integral –ve line Short circuit isolator compatible with Evolution analogue addressable system devices.
The Module includes setting options for a normally closed contact input and Fail Safe mode for Door release requirement.
LEDs are provided to Indicate Input & Output active, Fault and Isolator Open. Remote LED outputs are provided Relay status, Fault and Isolator Open indication.
Device address may be set using EV-AD2-EXT Hand held programmer.
The Short Circuit Isolator will protect the system, whilst allowing the device to continue communication from the opposite side. The isolator will self-reset when the fault clears.
Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model.
It is not possible to mix +ve and -ve isolator styles on a system.
The following resistors are required for Fault and Alarm monitoring:
EOL = 10k Ohm
Alarm = 470 / 680 Ohm
Key Features
> Loop Powered
> 3 x Class B Inputs
> 1 x 5A@240Vac Rated Relay
> 2 x 1A@30Vdc Rated Relay
> Integral -ve Isolater
> Failsafe option for Door Release
> EEPROM Addressed (Programmer)
Two Input, One Output Module (Loop Powered), c/w -ve SCI and mains rated output EV-2I1O
SKU: EV-2I1O
The Nittan EV-2I1O is a Dual Input, Single Output module, with integral –ve line Short circuit isolator compatible with Evolution analogue addressable system devices.
The Short Circuit Isolator will protect the system, whilst allowing the device to continue communication from the opposite side. The isolator will self-reset when the fault clears.
Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model.
It is not possible to mix +ve and -ve isolator styles on a system.
The following resistors are required for Fault and Alarm monitoring:
EOL = 10k Ohm
Alarm = 470 / 680 Ohm
Key Features
> Loop Powered
> 2 x Class B Inputs
> 5A@240Vac Rated Relay
> Integral -ve Isolator
> Failsafe option for Door Release
> EEPROM Addressed (Programmer)
> Housing fits standard UK 2 Gang pattress box
Hikvision AX PRO Series RF Camera Module DS-PDCM15PF-IR
SKU: DS-PDCM15PF-IR
- 1/2.7″ Progressive Scan CMOS
- 2.0 mm fixed lens
- 3D Digital Noise Reduction
- Easy Installation
- The direction of the Angle can be adjusted to fit the TT Detector’s Angle
- Protection Level IP66
Hikvision touch display door module DS-KD-TDM
SKU: DS-KD-TDM
- Modular door station Touch & Display module, needs mouting bracket
- 4-inch touch screen, IP65, IK8
- Dial number display, pin code & card unlock, contact list & advertisement display
- Stores and searches contact list
- Multiple languages
Network communication module for IP Pyronix control panels DIGI-LAN
SKU: DIGI-LAN
- Network communication module for the IP connected control panels
- Signalling formats: Fast Format IP (UK Only), Contact ID IP, SIA IP
- Supports upload/downloading (via Insite UDL software)
- Certified as SP5
Pyronix Deltabell Plus Module, Gread 3 FPDELTAP3MOD
SKU: FPDELTAP3MOD
- Backlit illuminated external sounder
- Polycarbonate weather proof base
- Excellent deterrent
- LED low power strobe
- Superior tamper protection
- Panel Type: Domestic & Commercial
- Audible and visual deterrent
- Enhanced weather protection
- Protected day and night
- Easy to install
- Engineer hold off facility
- Customisable lids
Hikvision Fibre Module HK-SFP-1.25G-1310-DF-MM
SKU: HK-SFP-1.25G-1310-DF-MM
- Single Power Supply 3.3V
- Small Form Factor Pluggable (SFP) MSA Compatible
- Duplex LC Connector
- Hot Pluggable Capability
- Compliant With ROHS Standard
- Cost effective SFP solution, enables higher port densities and greater bandwidth
- Support 1.25G Ethernet
CA Mini input output module CA734
SKU: CA734
LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13.
Includes a switch monitor, signal relay and onboard loop isolator.
7mA typical alarm current (1mA typical quiescent current) @ 22-40V DC.
Four plastic tabs for surface or panel mounting.
Includes a 1A 30V DC volt-free changeover relay. Can also switch 0.3A @125V AC.
Offers Switch +Ve, –Ve, LED +V, –Ve and changeover relay connections
Future header pin offers expansion opportunities for peripheral I/O devices.
ACTpro 8 Input/8 Output module ACT-IOM
SKU: ACT-IOM
Each Input/Output Module supports 8 inputs and 8 outputs per device. Each ACTpro controller supports up to 4 IO Modules (32 inputs and 32 outputs) The IO Module allows an ACTpro controller to be used in applications where signaling to other equipment is required. Example of this is elevator controls, alarm systems, CCTV, switching applications, IO Mapping.
| Power consumption: | 300 mA |
| Operating temperature: | -10 ~ +50 °C |
| Installation: | Surface (Indoor) |
| Dimensions (L x W x H): | 110 x 190 x 60 (mm) |
| Operating voltage: | 12 VDC |
| Weight: | 0.375 kg |
Best sellers...
Metro Prepaid Single Phase Meter with Tamper Keypad MET004 METROSINGLEPHASE
SKU: MET004
£59.90EX VAT