Speakers, Sounders & Sirens
CA Base sounder WHITE CA431A/W
LPCB certified to EN54-3 & 17 and Kiwa Telefication certified to EN54-13.
Impressive 92dB(A) sound output @ 1m.
Onboard short-circuit loop isolator.
5.5mA typical alarm current (460µA typical quiescent current) @ 24-40V DC.
Group addressing facility allows multiple devices to be operated simultaneously.
4 selectable volume levels and 31 selectable tones.
Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
IP21C rated.
White ceiling fixing plate & detector spur wires included.
Wireless outdoor siren that notifies of danger using sound and light StreetSiren-WHITE
Grade 2 Security Cetification EN50131
Wireless outdoor siren that notifies of danger using sound and light. The device is installed outside the room to raise an alarm for everyone to hear.
Resistant to dust, hail and rain drops. Operates at a temperature of −25°Ð¡
Indicates armed/disarmed mode with a built-in LED
Operates up to 5 years without battery replacement or from 12 V DC power supply
Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.
Principle of operation
Features
Installation and set up
Wireless outdoor siren with a clip lock for a branded faceplate STREETSIREN-WHITE-DD
Wireless outdoor siren with a clip lock for a branded faceplate
Free promotion of security services
Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbors and visitors.
To attract attention
StreetSiren DoubleDeck needs less than a second to activate a powerful siren and bright LED indicators in response to an alarm signal. Any break-in will be immediately exposed.
To indicate the system state
LED indication and short beeps of the buzzer remind users that premises are armed and delay when entering feature is active. The risk of a false alarm becomes significantly lower.
Right protection for every setting
StreetSiren DoubleDeck is flexible when it comes to settings which makes it as relevant in a quiet gated community as in a loud industrial area. The buzzer can be set to generate sound from 85 to 113 dB for an adjustable period: 3 to 180 seconds. Or it can be completely silent when the device is set to respond to alarm triggerings only with LED indication. The Ajax app allows engineers to choose detectors that activate the siren. It helps to prevent awkward situations when neighbors are notified every time that a washing machine leaks.
Weatherproof
StreetSiren DoubleDeck is resistant to heat, cold, and rapid changes in temperature. Its hermetically sealed body has been rated IP54 level of ingress protection. The outdoor siren is ready to withstand exposure to rains or snowfalls and can be installed on the exterior walls without a canopy.
Reacts to alarms in a split second
We have developed the Jeweller radio protocol to ensure the uninterrupted operation of all devices within the security system. The Jeweller uses time frames to synchronize communication of connected devices, authentication to eliminate forgery, and encryption to protect against data leaks. Moreover, it allows devices to operate for years from pre-installed batteries. Thanks to Jeweller, StreetSiren DoubleDeck can respond to detector alarms in 0,3 seconds, even when hub is offline.
Protected from vandals
2.5 meters is an optimal height for installing an outdoor siren. It improves visibility, audibility, and makes the device less accessible to intruders. Still, if someone will try to tear the siren off, the accelerator will trigger an alarm. In any case, alarm monitoring company and users will be notified about sabotage, and vandals will be deterred by a loud sound of the buzzer.
Effortless maintenance
Outdoor siren operates for 5 years on the pre-installed batteries and features external power terminals. Whether to use batteries as a primary power supply or a backup one is your choice. In any case, the system will notify you about the need for maintenance when the battery level will drain to 20%.
Installation without pitfalls
StreetSiren DoubleDeck was specifically designed to save engineers time on installation. QR-code helps to quickly add to the system. Configurations and tests are available in the app, all the time. Thanks to SmartBracket and pre-installed batteries the device doesn’t need to be disassembled before mounting. Brandplate can be adjusted quickly using a clip lock. To fix it extra firmly engineers can use a screw.
Dummy StreetSiren DoubleDeck used with brandplates STREETSIREN-WHITE-DUMMY
Dummy StreetSiren DoubleDeck used with brandplates
Wireless outdoor siren with a clip lock for a branded faceplate STREETSIREN-BLACK-DD
Wireless outdoor siren with a clip lock for a branded faceplate
Free promotion of security services
Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbors and visitors.
To attract attention
StreetSiren DoubleDeck needs less than a second to activate a powerful siren and bright LED indicators in response to an alarm signal. Any break-in will be immediately exposed.
To indicate the system state
LED indication and short beeps of the buzzer remind users that premises are armed and delay when entering feature is active. The risk of a false alarm becomes significantly lower.
Right protection for every setting
StreetSiren DoubleDeck is flexible when it comes to settings which makes it as relevant in a quiet gated community as in a loud industrial area. The buzzer can be set to generate sound from 85 to 113 dB for an adjustable period: 3 to 180 seconds. Or it can be completely silent when the device is set to respond to alarm triggerings only with LED indication. The Ajax app allows engineers to choose detectors that activate the siren. It helps to prevent awkward situations when neighbors are notified every time that a washing machine leaks.
Weatherproof
StreetSiren DoubleDeck is resistant to heat, cold, and rapid changes in temperature. Its hermetically sealed body has been rated IP54 level of ingress protection. The outdoor siren is ready to withstand exposure to rains or snowfalls and can be installed on the exterior walls without a canopy.
Reacts to alarms in a split second
We have developed the Jeweller radio protocol to ensure the uninterrupted operation of all devices within the security system. The Jeweller uses time frames to synchronize communication of connected devices, authentication to eliminate forgery, and encryption to protect against data leaks. Moreover, it allows devices to operate for years from pre-installed batteries. Thanks to Jeweller, StreetSiren DoubleDeck can respond to detector alarms in 0,3 seconds, even when hub is offline.
Protected from vandals
2.5 meters is an optimal height for installing an outdoor siren. It improves visibility, audibility, and makes the device less accessible to intruders. Still, if someone will try to tear the siren off, the accelerator will trigger an alarm. In any case, alarm monitoring company and users will be notified about sabotage, and vandals will be deterred by a loud sound of the buzzer.
Effortless maintenance
Outdoor siren operates for 5 years on the pre-installed batteries and features external power terminals. Whether to use batteries as a primary power supply or a backup one is your choice. In any case, the system will notify you about the need for maintenance when the battery level will drain to 20%.
Installation without pitfalls
StreetSiren DoubleDeck was specifically designed to save engineers time on installation. QR-code helps to quickly add to the system. Configurations and tests are available in the app, all the time. Thanks to SmartBracket and pre-installed batteries the device doesn’t need to be disassembled before mounting. Brandplate can be adjusted quickly using a clip lock. To fix it extra firmly engineers can use a screw.
Dummy StreetSiren DoubleDeck used with brandplates STREETSIREN-BLACK-DUMMY
Dummy StreetSiren DoubleDeck used with brandplates
Wireless outdoor siren that notifies of danger using sound and light StreetSiren-BLACK
Grade 2 Security Cetification EN50131
Wireless outdoor siren that notifies of danger using sound and light. The device is installed outside the room to raise an alarm for everyone to hear.
Resistant to dust, hail and rain drops. Operates at a temperature of −25°Ð¡
Indicates armed/disarmed mode with a built-in LED
Operates up to 5 years without battery replacement or from 12 V DC power supply
Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.
Principle of operation
Features
Installation and set up
Wireless Speaker Sounder SPEAKER/SOUNDER-WE
- Mimicking the alarm, entry/exit, fire and PA tones of the control panel
- Bright courtesy light
- Easy installer setup
- Pyronix High Security Wireless Encryption Protocol
- No wires, no mess
- One-Push-To-Learn Button
High Output Beacon EN54-23 White Flash EV-HIOP-BCN
The Nittan EV-HIOP-SB is a High Output Combined Sounder and Beacon unit which uses Nittan Evolution analogue addressable protocol.
This device has a red body and red lens.
Beacon VAD Base – Use exclusively with EV-PYS EV-PSVAD-Base
Ceiling/Wall Mounted Sounder/Beacon EV-AV2
6 W Miniature Ceiling Loudpeaker RCS6COAX-IP
- Use for high quality background music and speech
- Rated power: 10W
- Driver impedance: 8Ω
- Material: Steel
- Mounting: Torsion Springs
- Supports PoE+ and PoE power
- Standard RJ45 interface, PCB control and Class-D amp board (2 X 20w)
- Cost effective and simple installation with single cable deployment
- Easily configured, controlled, managed, and monitored via web browser
- Full DSP includes Ducker, AGC, PEQ, Hi/Low Pass, Compressor, Limiter, etc.
- IP based for music streaming, routing, paging and control over LAN/WAN
- VoIP call via SIP protocol
- Supports audio codecs G.711u, G.711a, G.722, PCM16K and MP3
- 3 control inputs, 1 contact output
- Internal storage (200mb) plus microSD card of up to 512GB available for message or music storage
IP 6W Plastic Cabinet Loudspeaker PWC6-IP
- Rated power: 6W
- Driver impedance: 8Ω
- Material: Plastic
- Mounting: Screws
- Supports PoE+ and PoE power
- Standard RJ45 interface, PCB control and Class-D amp board (2 X 20w)
- Cost effective and simple installation with single cable deployment
- Easily configured, controlled, managed, and monitored via web browser
- Full DSP includes Ducker, AGC, PEQ, Hi/Low Pass, Compressor, Limiter, etc.
- IP based for music streaming, routing, paging and control over LAN/WAN
- VoIP call via SIP protocol
- Supports audio codecs G.711u, G.711a, G.722, PCM16K and MP3
- 3 control inputs, 1 contact output
- Internal storage (200mb) plus microSD card of up to 512GB available for message or music storage
IP 6W Plastic Bow Front Cabinet Loudspeaker PBC6-IP
- Rated power: 6W
- Driver impedance: 8Ω
- Material: ABS Moulding with UV Inhibitors, Steel Mesh
- Mounting: Keyhole and/or Screws
- Supports PoE+ and PoE power
- Standard RJ45 interface, PCB control and Class-D amp board (2 X 20w)
- Cost effective and simple installation with single cable deployment
- Easily configured, controlled, managed, and monitored via web browser
- Full DSP includes Ducker, AGC, PEQ, Hi/Low Pass, Compressor, Limiter, etc.
- IP based for music streaming, routing, paging and control over LAN/WAN
- VoIP call via SIP protocol
- Supports audio codecs G.711u, G.711a, G.722, PCM16K and MP3
- 3 control inputs, 1 contact output
- Internal storage (200mb) plus microSD card of up to 512GB available for message or music storage
IP 30W Weatherproof Music Horn Loudspeaker MSH30-IP
- Use for high quality background music and speech
- Rated power: 30W
- Driver impedance: 8Ω
- Material:Plastic
- Mounting: Aluminium U Bracket
- Supports PoE+ and PoE power
- Standard RJ45 interface, PCB control and Class-D amp board (2 X 20w)
- Cost effective and simple installation with single cable deployment
- Easily configured, controlled, managed, and monitored via web browser
- Full DSP includes Ducker, AGC, PEQ, Hi/Low Pass, Compressor, Limiter, etc.
- IP based for music streaming, routing, paging and control over LAN/WAN
- VoIP call via SIP protocol
- Supports audio codecs G.711u, G.711a, G.722, PCM16K and MP3
- 3 control inputs, 1 contact output
- Internal storage (200mb) plus microSD card of up to 512GB available for message or music storage
High Output Sounder Beacon EN54-23 White Flash EV-HIOP-SB
IP 10W Metal Projector Ceiling Loudspeaker CELL10-IP
- Rated power: 10W
- Driver impedance: 8Ω
- Material: Aluminium with Stainless Steel Hardware
- Mounting: Aluminium U Bracket
- Supports PoE+ and PoE power
- Standard RJ45 interface, PCB control and Class-D amp board (2 X 20w)
- Cost effective and simple installation with single cable deployment
- Easily configured, controlled, managed, and monitored via web browser
- Full DSP includes Ducker, AGC, PEQ, Hi/Low Pass, Compressor, Limiter, etc.
- IP based for music streaming, routing, paging and control over LAN/WAN
- VoIP call via SIP protocol
- Supports audio codecs G.711u, G.711a, G.722, PCM16K and MP3
- 3 control inputs, 1 contact output
- Internal storage (200mb) plus microSD card of up to 512GB available for message or music storage
CA Compact ceiling VAD WHITE CA458A/SW
LPCB certified to EN54-17 & 23 and Kiwa Telefication certified to EN54-13.
Provides ‘C-3-8’ light distribution when ceiling mounted.
Can also provide ‘W-3-3.1’ light distribution when wall mounted.
Onboard short-circuit loop isolator.
460µA quiescent current.
7mA typical alarm current (460µA typical quiescent current) @ 27-40V DC (VAD lit).
Group addressing facility allows multiple devices to be operated simultaneously.
IP21C rated.
CA Compact ceiling sounder VAD WHITE CA451A/SW
LPCB certified to EN54-3, 17 & 23 and Kiwa Telefication certified to EN54-13.
Provides ‘C-3-8’ light distribution when ceiling mounted.
Can also provide ‘W-3-3.1’ light distribution when wall mounted.
Impressive 96dB(A) sound output @ 1m.
Onboard short-circuit loop isolator.
12.5mA typical alarm current (460µA typical quiescent current) @ 27-40V DC (VAD lit, sounder on max).
Group addressing facility allows multiple devices to be operated simultaneously.
4 selectable volume levels and 31 selectable tones.
IP21C rated.
CA Wall sounder VAD deep RED CA433A/DR
LPCB certified to EN54-3, 17 & 23 and Kiwa Telefication certified to EN54-13
Provides ‘W-2.75-9’ rated light distribution. Also rated as a W-4-4 VAD.
Impressive 100dB(A) sound output @ 1m.
Onboard short-circuit loop isolator.
13.5mA typical alarm current (550µA typical quiescent current) @ 27-40V DC (VAD lit, sounder on max).
Group addressing facility allows multiple devices to be operated simultaneously.
4 selectable volume levels and 32 selectable tones.
IP33C (Type B) rated.
CA Wall sounder deep IP55/65 RED CA430A/DR/65
LPCB certified to EN54-3 & 17 and Kiwa Telefication certified to EN54-13.
Impressive 100dB(A) sound output @ 1m.
Onboard short-circuit loop isolator.
6.5mA typical alarm current (460μA typical quiescent current) @24-40V DC (Sounder on max).
Group addressing facility allows multiple devices to be operated simultaneously.
4 selectable volume levels and 31 selectable tones.
IP55C rated.
Faceplate for branding StreetSiren DoubleDeck SSDDBRANDPLATE-BLACK
Faceplate for branding StreetSiren DoubleDeck
Free promotion of security services
Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbours and visitors.
Secure mounting
Brandplate mounts on StreetSiren DoubleDeck using a clip lock. To make it extremely tight, we provided a possibility to use a screw. Even a strong wind won’t tear Brandplate off the siren.
Faceplate for branding StreetSiren DoubleDeck, x10 SSDDBRANDPLATES-BLACK-X10
Faceplate for branding StreetSiren DoubleDeck
Free promotion of security services
Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbors and visitors.
How to order Brandplates
Free printing
Order 4 batches of Brandplates (40 pcs) or more in a single color to get free printing. Your design may include logo, company name and contact information: website or phone number.
Click below link to add your artwork
Brandplate Constructor | Ajax Systems
Secure mounting
Brandplate mounts on StreetSiren DoubleDeck using a clip lock. To make it extremely tight, we provided a possibility to use a screw. Even a strong wind won’t tear Brandplate off the siren.
Faceplate for branding StreetSiren DoubleDeck SSDDBRANDPLATE-WHITE
Faceplate for branding StreetSiren DoubleDeck
Free promotion of security services
Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbours and visitors.
Secure mounting
Brandplate mounts on StreetSiren DoubleDeck using a clip lock. To make it extremely tight, we provided a possibility to use a screw. Even a strong wind won’t tear Brandplate off the siren.
Faceplate for branding StreetSiren DoubleDeck, x10 SSDDBRANDPLATES-WHITE-X10
Faceplate for branding StreetSiren DoubleDeck
Free promotion of security services
Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbors and visitors.
How to order Brandplates
Free printing
Order 4 batches of Brandplates (40 pcs) or more in a single color to get free printing. Your design may include logo, company name and contact information: website or phone number.
Click below link to add your artwork
Brandplate Constructor | Ajax Systems
Secure mounting
Brandplate mounts on StreetSiren DoubleDeck using a clip lock. To make it extremely tight, we provided a possibility to use a screw. Even a strong wind won’t tear Brandplate off the siren.
ActiV Wall sounder VAD deep base RED BF433C/CC/DR
- LPCB certified to EN54-3 (Sounders) and EN54-23 (VADs)
- Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD
- Impressive 100dB(A) sound output @ 1m
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- IP33C rated
- Manufactured in the UK by C-TEC
ActiV Wall sounder IP55/65 deep base RED BF430C/CC/DR/65
- LPCB certified to EN54-3 (Sounders)
- Impressive 100dB(A) sound output @ 1m
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA
- Alarm Current at 18Vdc = 3.8mA
- IP55C rated (weatherproof)
- Manufactured in the UK by C-TEC
ActiV Wall sounder shallow base RED BF430C/CC/SR
- LPCB certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc = 3.8mA.
- IP21C rated.
- Manufactured in the UK by C-TEC.
ActiV Conventional Wall Sounder BF430C/CC/DR
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc = 3.8mA.
- IP33C rated.
- Manufactured in the UK by C-TEC.
CX Wall sounder IP55/65 deep base RED BF430A/CX/DR/65
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
- Impressive 103dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current
- 5mA alarm current @24V DC (sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- IP33C (Type A) rated
CX Wall sounder deep base RED BF430A/CX/DR
- Third-party certified to EN54-3 (Sounders) and 17 (Isolators) by the LPCB
- Impressive 103dB(A) sound output @ 1m
- Onboard short-circuit loop isolator
- 550µA quiescent current
- 5mA alarm current @24V DC (sounder on max)
- Group addressing facility allows multiple devices to be operated simultaneously
- 7 selectable volume levels and up to 15 selectable tone pairs
- IP33C (Type A) rated
ActiV Base sounder white BF431C/CC/W
- Third-party certified to EN54-3 (Sounders).
- Impressive 96dB(A) sound output @ 1m.
- 31 selectable primary and secondary tone pairs and two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA
- Alarm Current at 18Vdc = 3.8mA
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.