White
Knightsbridge 1-way 10-150W (5-100W LED) Trailing edge pull cord dimmer switch – matt white 8301MW
1-way 10-150W (5-100W LED) Trailing edge pull cord dimmer switch – matt white
Knightsbridge 13A 2G SP Switched Socket with twin earths SN9000S
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Single Pole
– Top access to captive terminals to speed up installation
– Twin earths
– Includes screw cap covers
– Min. mounting box depth: 25mm
– Certified to BS 1363-2:2016+A1:2018
– ASTA approved License No. 1412
Ener-J 1 Gang Wireless Kinetic Switch White Body WS1050X
Wireless 1 Gang Switch (white finish), Installation-Easy, Battery-Free Wall On/Off Switch Outdoor Waterproof IP55 Wireless Kinetic Switch for Lamp Electric Appliance. (Receiver Needs to be purchased separately)Features:- Self-supply and dimmable: The non dimmer/dimmer switch requires no batteries and no power connection. The energy is built up kinetically by pressing the…
Knightsbridge Curved edge 20A DP Switch CU8341
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 20AX rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
For Flex Outlet version order Grid parts
1 x CUG2,
1 x CUG1F,
1 x CUGM6,
1 x CUGM16
Knightsbridge Curved Edge 10AX 6G 2-Way Switch CU4200
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 10AX rated
– 6G 2-way on double plate
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 5A Unswitched Round Pin Socket CU5U
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 5A rated
– Unswitched round pin socket
– Includes screw cap covers
– Min. Mounting box depth: 25mm
– Certified to BS 546
– Packed in Individual Knightsbridge rip top polybag with euro slot
![Knightsbridge 230V Triple USB Charger Plate 2xUSB-C 1xUSB-A [20V DC Max. 63W] – Matt White - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/1504170-autocrop-1200x1194-1-430x428.png "Knightsbridge 230V Triple USB Charger Plate 2xUSB-C 1xUSB-A [20V DC Max. 63W] – Matt White - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge 230V Triple USB Charger Plate 2xUSB-C 1xUSB-A [20V DC Max. 63W] – Matt White
Ideal solution for multiple users, dedicated charger plate. Screwless low profile metal design. Perfect for Coffee shops. foyers, receptions, hotel rooms, offices and home offices
Features
- Dual USB-C charging
- Legacy USB-A port for older devices
- Screwless low profile design with built in gasket
- Minimum mounting box depth 25-35mm*
*dependent on wiring conditions
Benefits
- Tidy all in one charging solution
- USB-C up to 63W is enough to replace your USB-C laptop power supply* with a 100W USB-C Cable [AVPDCC15]
- No more chunky chargers
- Create Hot Desking environments
*based on using a 65W or below laptop charger
Charging Parameters
1 port in use
- USB-C1 – Supports PD3.0 (Max. 60W)
- USB-C2 – Supports PPS (Max. 63W) and PD3.0 (Max. 60W)
- USB-A – For legacy charging devices
2 ports in use
- USB-C1 + USBC2 – 45W + 18W (Max. 63W)
- USB-C1 + USB-A – 45W + 18W (Max. 63W)
- USB-C2 + USB-A – 15W shared (Max. 15W)
All ports in use
- USB-C1+USB-C2+USB-A – 45W shared + 15W (Max. 60W)
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY PLEASE ALSO NOTE THAT WITH HIGHER OUTPUT USB CHARGERS YOU MUST CHECK YOUR CHARGE CABLE CAN SUPPORT IT OTHERWISE YOU WILL ONLY GET THE OPTIMUM POWER THE CABLE CAN HANDLE I.E. 30W OR LESS
Ener-J 1 Gang Grid Switch – HAGER Style White
Ener-J 1 Gang Grid Switch – BG Style White
Knightsbridge 10AX 1G DP Switch CU1000DP
- 10AX rated
- Double Pole switch
- Includes screw cap covers
- Certified to EN 60669-1
- Supplied in Knightsbridge rip top polybag with euro slot
Ener-J 3 Gang Smart Push Button Mechanical Light Switch, No Neutral Needed, APP & Voice Control SHA5353
3 Gang Smart Light Switch, No Neutral Wire Required, Work with Alexa, Google Home Device, ENERJSMART App, Set Timer, Push Button with LED Indicator, 600W/Gang, Also use it as a 2 Way with our ECO Series Wireless Kinetic Switch
Ener-J 2 Gang Smart Push Button Mechanical Light Switch, No Neutral Needed, APP & Voice Control SHA5352
2 Gang Smart Light Switch, No Neutral Wire Required, Work with Alexa, Google Home Device, ENERJSMART App, Set Timer, Push Button with LED Indicator, 600W/Gang, Also use it as a 2 Way with our ECO Series Wireless Kinetic Switch
Ener-J 1 Gang Smart Push Button Mechanical Light Switch, No Neutral Needed, APP & Voice Control SHA5351
1 Gang Smart Light Switch, No Neutral Wire Required, Work with Alexa, Google Home Device, ENERJSMART App, Set Timer, Push Button with LED Indicator, 600W/Gang, Also use it as a 2 Way with our ECO Series Wireless Kinetic Switch
Ener-J 1 Gang Wireless Kinetic Switch + Non Dimmable & WiFi 5A RF Receiver Bundle Kit WS1062X
Wireless Light Switch Kit,No Battery No Wiring, Easy to Install On/Off Switches for Lights Lamps Fans Appliances, Self-powered Kinetic Remote Controlled Light 1 Gang Switch and 500W Non Dimmable RF+WIFI Receiver, Works with our APP as well as Voice control with Alexa and Google Home.FEATURES: NO BATTERIES NO WIRING NO…
Ener-J Wifi Smart 1 Gang Touch Switch, No Neutral Needed, White Body SHA5312
Wireless Remote Control your switch from anywhere, Works with Alexa & Google Home
Ener-J Wifi Smart 3 Gang Touch Switch, No Neutral Needed, White Body SHA5314
Wireless Remote Control your switch from anywhere, Works with Alexa & Google Home
Ener-J Smart WiFi Dimmable Switch SHA5299
Stepless touch dimming makes the brightness adjustment easy and smooth. Max 220W LED Load. Compatible with Alexa and Google Home
Ener-J Smart WiFi 13A WiFi Twin Wall Sockets with single USB. Push button SHA5302
Innovative Home Automation system from ENER-J. Control your connected devices from anywhere. (works with Enerjsmart App, Alexa, Google Home, Google Assistant)
Ener-J 3 Gang Wireless Kinetic Switch (white body) WS1035
PRO RANGE Wireless Kinetic Switches which work only with PRO Range Receivers
Ener-J 3 Gang Wireless Kinetic Switch White Body WS1052X
Wireless 3 Gang Switch (white finish), Installation-Easy, Battery-Free Wall On/Off Switch Outdoor Waterproof IP67 Wireless Kinetic Switch. (NON DIMMABLE OR DIMMABLE RECEIVER NEEDS TO BE PURCHASED SEPARATELY)
Ener-J 1 Gang Wireless Kinetic Switch + Non-Dimmable Receiver Bundle Kit WS1060X
Includes 1 Gang Kinetic Switch and 500W RF Receiver
Ener-J 1 Gang Wireless Kinetic Switch + Dimmable & WiFi Receiver Bundle Kit WS1061X
Wireless Light Switch Kit, No Battery No Wiring, Easy to Install On/Off/Dimmable Switches for Lights Lamps Fans Appliances, Self-powered Kinetic Remote Controlled Light 1 Gang Switch and 100W Dimmable RF + Wi-Fi Receiver, Works with ENERJSMART APP as well as Voice control with Alexa and Google Home.
Ener-J 2 Gang Wireless Kinetic Switch White Body WS1051X
Wireless 2 Gang Switch (white finish), Installation-Easy, Battery-Free Wall On/Off Switch Outdoor Waterproof IP67 Wireless Kinetic Switch. (NON DIMMABLE OR DIMMABLE RECEIVER NEEDS TO BE PURCHASED SEPARATELY) Features: Wireless Kinetic Switches Self-supply and dimmable: The non-dimmer/dimmer switch requires no batteries and no power connection. The energy is built up kinetically by…
Knightsbridge 20A Flex Outlet Plate – Matt White SF8342MW
20A Flex Outlet Plate – Matt White
Knightsbridge 13A Smart 2G Switched Socket SN9KW
Upgrade an existing 2G switched socket to a smart solution.
– 230V, 13A
– Min mounting box depth: 35-35mm depending on wiring conditions
– Stand-by power of just 0.8W – Plug in an extension lead into this device and control multiple vampire devices to help you conserve energy
– Control household appliances, like a table lamp, or cabinet lighting directly at the socket either manually or from your smartphone, tablet, SmartKnight or Smartlife Apps at home or away
– Voice Control – fully compatible with Amazon Alexa, Google Assistant and SIRI Shortcuts.
– Set up schedule using the timer function for things to switch on and off – for example turn off all your entertainment system at night, some receivers can still consumer up to 30W an hour
– Power monitoring function provided in the app
– Wi-Fi connectivity IEEE802.11b/g/n (2.4Ghz only)
– 2-year warranty
**THIS PRODUCT IS NOT SUITABLE FOR EV CHARGING**
Knightsbridge 13A 2G Switched socket with outboard rockers and dual USB (A+C) 5V DC 4.8A shared SN9002
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Outboard rockers
– Built in Dual USB Charger – Type-A and Type-C
– 5V DC 4.8A (shared)
– Top access to captive terminals to speed up installation.
– Twin earths.
– Min. Mounting box depth: 25-35mm dependent on wiring conditions
– Certified to BS 1363-2, EN 61000
– Packed in Individual Knightsbridge rip top polybag with euro slot
NB: Requires 35mm deep pattress box if surface mounting (CU1800)
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge 13A 2G DP Switched Socket with twin earths and outboard rockers SN9001
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Double Pole
– Outboard rockers
– Top access to captive terminals to speed up installation.
– Twin earths
– Includes screw cap covers
– Min. Mounting box depth: 25mm
– Certified to BS 1363-2
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless Reading Light with Dual USB Charger – Matt White SFRLMW
Screwless reading light solution with touch dimmer and dual USB charger
– IP20 for indoor use only
– Matches existing Screwless range
– 2W LED reading light
– 3000K
– ON/OFF and touch dimming control on head unit
– Dual USB Charger A+A (5V DC 2.4A shared)
– Min mounting depth: 25-35mm depending on wiring conditions
Knightsbridge 13A 2G DP switched socket with night light function – Matt white SFR9NLMW
Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rockers, unique socket insert design that is completely hidden once a plug is inserted. Innovative built in night light feature positioned at bottom of plate that gives a comforting light during the night. Ideal for use on landings, kids bedrooms or hotel hallways. Removes the need for ugly plug in plastic nightlights
– 230V, 13A
– Double pole switches
– Fitted with twin earth terminals
– Built in automatic night light feature
– Sensor type: photocell (non-adjustable)
– On less than 5-15Lx, off more than 20-40Lx
– Minimum mounting box depth: 25-35mm (depending on wiring conditions)
Knightsbridge 45A DP switch and 13A switched socket with neons – matt white SFR83MNMW
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model combines a 45A switch with a 13A socket.
– 45A
– Double pole
– With neon indicators
– 13A switched socket
– Minimum mounting box depth: 47mm
Knightsbridge 13A 1G Unswitched socket – Matt White with white insert SFR7000UMW
Perfect finishing touch to any modern home, flawless Screwless Flat Plate metal design, unique socket insert design that is completely hidden once a plug is inserted.
– 13A 1G Unswitched Socket
– Screwless low profile design with built in gasket
– Certified to BS 1363-2
– Minimum mounting box depth 25mm
Knightsbridge 45A 2G DP switch with neon – matt white SF82MNMW
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient.
– 45A
– Double pole
– With neon indicator
– Minimum mounting box depth: 47mm
Knightsbridge 13A 2G DP RCD Switched Socket – 30mA (Type A) CU9RCD
Type A RCD for AC residual current and pulsating DC up to 6 mA. Suitable for equipment with electronic components such as IT equipment.
Passive (latching) type, which will automatically reset after a power outage, without the need for manual resetting.
– Tripping current (IΔn): 30mA
– Trip time @ IΔn: 40ms
– Minimum mounting box depth: 35mm
– Outboard rockers
– Switch type: Double Pole
– Dual earth terminals
– Captive screw terminals
Knightsbridge 13A 2G DP switched socket with night light function CU9NL
Gently contoured 7mm plate with rounded edges and anti-microbial properties. Innovative built in night light feature positioned at bottom of plate that gives a comforting light during the night. Ideal for use on landings, kids bedrooms or hotel hallways. Removes the need for ugly plug in plastic nightlights
– 230V, 13A
– Double pole switches
– Fitted with twin earth terminals
– Built in automatic night light feature
– Sensor type: photocell (non-adjustable)
– On less than 5-15Lx, off more than 20-40Lx
– Minimum mounting box depth: 25-35mm (depending on wiring conditions)
Knightsbridge Curved Edge 13A 2G DP Switched Socket with Dual USB Charger (5V DC 4.8A shared) CU9948
Gently contoured 7mm plate with rounded edges and anti-microbial properties, includes screw cap covers.
– 13A rated
– Double Pole
– Built in Dual USB Charger 5V DC 4.8A (shared)
– Top access to captive terminals to speed up installation.
– Twin earths.
– Min. Mounting box depth: 25-35mm dependent on wiring conditions
– Certified to BS 1363-2, EN 61000
– Packed in Individual Knightsbridge rip top polybag with euro slot
NB: Requires 35mm deep pattress box if surface mounting (CU1800)
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge 13A 2G DP Switched Socket with Dual USB FASTCHARGE ports (A + C) CU9909
Great for Offices, Home Offices, Café’s, Bars, Restaurants, Coffee Shops, Hospitality areas anywhere where someone might need a FASTCHARGE i.e., grab a coffee 30 mins later you have 50% charge
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W.
Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W.
If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT:
THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge 13A 2G DP Switched Socket with twin earths and outboard rockers CU9001
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 13A rated
– Double Pole
– Outboard rockers
– Top access to captive terminals to speed up installation.
– Twin earths
– Includes screw cap covers
– Min. Mounting box depth: 25mm
– Certified to BS 1363-2
– Inherent Anti-microbial properties – 3rd party tested
Knightsbridge 13A RCD Fused Spur Unit (Type A) – 30mA CU6RCD
Type A RCD for AC residual current and pulsating DC up to 6 mA. Suitable for equipment with electronic components such as IT equipment.
Passive (latching) type, which will automatically reset after a power outage, without the need for manual resetting.
– Tripping current (IΔn): 30mA
– Trip time @ IΔn: 40ms
– Minimum mounting box depth: 35mm
– Double pole RCD contact break
Knightsbridge Curved Edge 13A Switched Fused Spur Unit with neon and Flex Outlet from Base CU6300NF
Gently contoured 10mm plate with rounded edges and anti-microbial properties. Additional depth on plate is too allow for cable exit from base of unit.
– 13A rated
– Switched Fused Spur unit
– With neon indicator
– With flex outlet from base
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A Fused Spur Unit with Neon and Flex Outlet from Base CU6000NF
Gently contoured 10mm plate with rounded edges and anti-microbial properties. Additional depth on plate is too allow for cable exit from base of unit.
– 13A rated
– Unswitched Fused Spur unit
– With neon
– With flex outlet from base
– Includes screw cap covers
Knightsbridge Curved Edge 4G Dimmer Plate with Matching Dimmer Caps CU4DIM
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 4G dimmer plate with matching dimmer caps – unpopulated
– Suitable for mounting Knightsbridge dimmer modules or other after-market dimmer modules for a bespoke solution.
– Includes screw cap covers
Knightsbridge Curved Edge 3G Dimmer Plate with Matching Dimmer Caps CU3DIM
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 3G dimmer plate with matching dimmer caps – unpopulated
– Suitable for mounting Knightsbridge dimmer modules or other after-market dimmer modules for a bespoke solution.
– Includes screw cap covers
Smart plug SOCKET-WHITE
Smart plug
Spare accessories available (likely on a special order basis), if required please speak to Sales or your BDM.
Everything is ready by the time you get home
You will come back home to enjoy comfortable climate and cozy atmosphere all year round. Turn on your heating devices during winter and air conditioner during summer. Start your humidifier and heat water for your bath: do it all with only a few taps in the app on your way home.
No more worries about forgetting an iron on
Identifies power vampires
Socket informs you about the most power consuming devices. As soon as an appliance starts consuming electricity, Socket’s LED changes colour in real time.
Complies with electrical safety standards
Protects your curious little ones
Safeguard in the power grid
Always in touch
Home and office automation
Simple connection
Knightsbridge Curved Edge 13A Switched Fused Spur Unit CU6300
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 13A rated
– Switched Fused Spur unit
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless Telephone Extension Socket – Matt White SF7400MW
Secondary or extension telephone socket are used to run additional points of the original master socket. Standard BT type socket with screw type terminals. Flawless Screwless design
– Extension BT type socket
– Screw terminals
– Screwless low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Screwless 1G TV outlet (non-isolated) – Matt white SF0100MW
Ideal for standard TV/Coax connections (non-isolated). Flawless Screwless design
– Coaxial TV outlet
– Non-isolated
– Screwless low profile design with built in gasket
– Certified to BS5733
– Minimum mounting box depth: 25mm
Knightsbridge Curved Edge 13A Fused Spur Unit with 3A Fuse Fitted CU6000-3A
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Fitted with 3A fuse
– Fused Spur unit
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 20A DP Switch with Neon CU8341N
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 20AX rated
– Double Pole
– With neon
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A Fused Spur Unit CU6000
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 13A rated
– Fused Spur unit
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 10AX 3-Pole Fan Isolator Switch CU1100
Gently contoured 7mm plate with rounded edges.
– 10AX rated
– Triple Pole
– Includes screw cap covers
– Laser printed for cleaner look and longevity
– Certified to EN 60669-2-4,EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 10AX Intermediate Switch CU1200
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 10AX rated
– Intermediate
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge Telephone Extension Socket CU7400
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Extension BT type socket
– Screw terminals
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge Twin Coax TV Outlet (non-isolated) CU0110
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Twin Coaxial TV outlet
– Non-isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A 1G Unswitched Socket CU7000U
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 13A rated
– Unswitched
– Includes screw cap covers
– Min. Mounting box depth: 25mm
– Certified to BS 1363-2
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A 1G SP Switched Socket CU7000S
Gently contoured 7mm plate with rounded edges and anti-microbial properties, includes screw cap covers.
– 13A rated
– Single Pole
– Min. Mounting box depth: 25mm
– Certified to BS 1363-2:2016+A1:2018
– ASTA approved License No. 1412
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless 13A Switched Fused Spur Unit – Matt White SF6300MW
Fused spur solution in flawless Screwless low profile metal design with matching fuse holder and rocker
– 13A rated
– Switched
– Screwless low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Screwless 2G Blanking Plate – Matt White SF8360MW
Used to neatly cover unused or redundant boxes. Flawless Screwless design.
– Screwless low profile design with built in gasket
– Certified to IEC 60670-1
Knightsbridge Curved Edge SAT TV Outlet (non-isolated) CU0150
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 1 x F-Type SAT TV outlet
– Non-isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 45A 2G DP Switch (White Rocker) SN8332W
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 45A 1G DP Switch (White Rocker) SN8331W
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A DP Cooker Switch and 13A Socket (White Rocker) CU8333W
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A DP Cooker Switch
– 13A Switched Socket
– Laser printed for cleaner look and longevity
– Includes screw cap covers
– Certified to BS 4177, BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 20A 1G DP Switch SN8341
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 20A rated
– Double Pole
– Flex outlet from base
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 20A 1G DP Switch with Neon SN8341N
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 20A rated
– Double Pole
– Flex outlet from base
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless 3W RMS Bluetooth Speaker Outlet – Matt White SFBLUEMW
Perfect finishing touch to any modern home,flawless Screwless low profile metal design,discreet and convenient solution for a speaker system in a kitchen,bedroom or hotel room.
– 3W RMS Speaker
– Bluetooth Connectivity
– Blue back-lit LED on/off button
– Screwless low profile design with built in gasket
– Certified to BS 5733,EN 60950-1,EN 60065,EN 55032,EN 55024,EN 61000
– EMC Certified and ErP Ready
– Minimum mounting box depth 47mm
DESIGNED FOR MOUNTING FLUSH TO WALL NOT IN SURFACE BOXES
Knightsbridge IP55 Photocell Switch – Wall Mountable (White) OS006
Dusk till dawn photocell timer. Ideal fro controlling outdoor lighting during the evenings for security and convenience. Also great for choice for shop window display lighting or advertising systems.
– IP55 rated
– Easy to install
– Ambient light memory function
– Settings for 2/4/6/8 hour duration
– Switching capacity: Max. 1000W Incandescent, Max. 500W Fluorescent/Inductive, Max. 200W LED
– Certified to EN 60669-2-1, EN 60669-1, EN 55015, EN 61547, EN 61000
Knightsbridge 1G 40-400W (5-100W LED) dimmer module CUGM14
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Push on/off operation
– 40-400W rating for incandescent lamps
– 5-100W rating for LED
– 2-way
– Leading edge dimmer
– Front mounting grid module
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
WE RECOMMEND A MAXIMUM OF 10-12 LAMPS PER GRID DIMMER TO PREVENT ANY INRUSH CURRENT PROBLEMS
Knightsbridge Curved Edge Dual Voltage Shaver Socket with Neon CU8900N
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 115V/230VAC 20VA
– Dual Voltage Shaver Socket
– With neon
– Includes screw cap covers
– Laser printed for cleaner look and longevity
– Certified to BS EN 61558
– Supplied in Knightsbridge slide packaging
Knightsbridge Curved Edge 1G 40-400W Dimmer CU2161
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 1G 2-way
– 40-400W for incandescent lamps
– 3-100W for LED
– Push on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge Curved Edge 45A DP Switch and 13A Switched Socket CU8333
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A DP Cooker Switch
– 13A Switched Socket
– Laser printed for cleaner look and longevity
– Includes screw cap covers
– Certified to BS 4177, BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless 1G SAT TV outlet (non-isolated) – Matt white SF0150MW
Ideal for standard SAT TV/F-type connections (non-isolated). Non-isolated outlets are the standard type for domestic installations. This version must be used for satellite installations as a two way signal is required. The satellite box does not only receive signals it also sends a signal back to the satellite dish. Flawless Screwless design
– 1 x F-Type SAT TV Outlet
– Non-isolated
– Screwless low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge Curved Edge 45A DP Switch with Neon (large) CU8332N
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A rated
– Double Pole
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A DP Switch (large) CU8332
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A DP Switch with Neon (small) CU8331N
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A rated
– Double Pole
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 45A 2G DP Switch SN8332
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A DP Switch (small) CU8331
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Brush Module 100 x 50mm – White NETBR4GW
Euro-module design cable management brush module.
– Exclusive Knightsbridge Curved design
– 100 x 50mm
– Facilitates a tidy cable entry/exit from wall
– Ideal for hiding away unsightly cables and creating that floating TV look
NB: NOT INTENDED FOR US ALONGSIDE OTHER MODULES IN SAME FACE PLATE OR ALONGSIDE POWER SOCKETS IN SAME CHANNEL DUE TO POTENTIAL HAZARDOUS VOLTAGE THAT MAY BE PRESENT AND EASY TO REACH.
Knightsbridge Curved edge 45A Cooker Connection Unit CU8340
Gently contoured 23mm plate with rounded edges and anti-microbial properties
– 45A rated
– Concealed fitting, large capacity easy to wire terminals
– Clamp fitted with a bottom knockout for outgoing cable
– Includes screw cap covers
– Certified to BS 5733
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 10AX 4G 2-Way Switch CU4100
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 10AX rated
– 4G 2-way on double plate
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge Coax TV and SAT TV Outlet CU0140
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 1 x Coaxial TV outlet
– 1 x F-Type SAT TV outlet
– Non-isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A Switched Fused Spur Unit with Neon CU6300N
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 13A rated
– Switched Fused Spur unit
– With neon indicator
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A Fused Spur Unit with Neon CU6000N
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 13A rated
– Fused Spur unit
– With neon
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A Switched Fused Spur Unit with Flex Outlet from Base CU6300F
Gently contoured 10mm plate with rounded edges and anti-microbial properties. Additional depth on plate is too allow for cable exit from base of unit.
– 13A rated
– Switched Fused Spur unit
– With flex outlet from base
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A 2G Unswitched Socket CU9000U
Gently contoured 7mm plate with rounded edges and anti-microbial properties, includes screw cap covers.
– 13A rated
– Unswitched
– Twin earth
– Min. mounting box depth: 25mm
– Certified to BS 1363-2
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge Telephone Master Socket CU7300
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Master BT type socket
– Screw terminals
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 10AX 3G 2-Way Switch CU4000
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 10AX rated
– 3G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 13A 2G DP Switched Socket with twin earths – ASTA approved CU9000
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 13A rated
– Double Pole
– Top access to captive terminals to speed up installation.
– Twin earths
– Includes screw cap covers
– Min. Mounting box depth: 25mm
– Certified to BS 1363-2:2016+A1:2018
– ASTA approved License No. 1412
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge 13A 2G SP Switched Socket with twin earths – ASTA approved CU9000S
Gently contoured 7mm plate with rounded edges and anti-microbial properties, includes screw cap covers.
– 13A rated
– Single Pole
– Top access to captive terminals to speed up installation.
– Twin earths.
– Min. Mounting box depth: 25mm
– Certified to BS 1363-2:2016+A1:2018
– ASTA approved License No. 1412
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 13A 1G DP Switched Socket CU7000
Gently contoured 7mm plate with rounded edges and anti-microbial properties, includes screw cap covers.
– 13A rated
– Double pole
– Min. mounting box depth: 25mm
– Certified to BS 1363-2
– ASTA approved License No. 1412
Knightsbridge Curved Edge Coax TV Outlet (isolated) CU0120
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Coaxial TV outlet
– Isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 10AX 2G 2-Way Switch CU3000
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 10AX rated
– 2G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge Coax TV Outlet (non-isolated) CU0100
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Coaxial TV outlet
– Non-isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 10AX 1G 2-Way Switch CU2000
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 10AX rated
– 1G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Rocker cover printed “DISHWASHER” CUDISH
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge 45A 2G DP Switch with Neon (White Rocker) SN8332NW
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A rated
– Double Pole
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 10AX 6G 2-Way Switch SN4200
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 10AX rated
– 6G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 5A Unswitched Round Pin Socket SN5U
Square edge 9mm plate with anti-microbial properties
– 5A rated
– Unswitched round pin socket
– Includes screw cap covers
– Min. Mounting box depth: 25mm
– Certified to BS 546
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 2G Blanking Plate CU8360
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– Used to neatly cover unused or redundant boxes
– Includes screw cap covers
– Packed in Individual Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless 1G Blanking Plate – Matt White SF8350MW
Used to neatly cover unused or redundant boxes. Flawless Screwless design.
– Screwless low profile design with built in gasket
– Certified to IEC 60670-1
![Knightsbridge PM8300 10AX 2-way pull cord switch [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/2158b50a-dd27-4b10-8417-76ea7abe016f-1.jpg.webp "Knightsbridge PM8300 10AX 2-way pull cord switch [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge PM8300 10AX 2-way pull cord switch [Part M Compliant]
10AX 2-way pull cord switch [Part M Compliant]
![Knightsbridge PM8310N 50A DP pull cord switch [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/25d02b63-b406-48ae-b285-f65a1779125b-1.jpg.webp "Knightsbridge PM8310N 50A DP pull cord switch [Part M Compliant] - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge PM8310N 50A DP pull cord switch [Part M Compliant]
50A DP pull cord switch [Part M Compliant]
Knightsbridge Switch cover marked “FAN BOOST” – White GDBOOSTU
Switch cover marked “FAN BOOST” – White
Knightsbridge Switch cover marked “FAN BOOST” – Matt White GDBOOSTMW
Switch cover marked “FAN BOOST” – Matt White
Knightsbridge Switch cover “marked WINE COOLER” – white GDWINEU
Switch cover “marked WINE COOLER” – white
Knightsbridge Switch cover “marked WINE COOLER” – matt white GDWINEMW
Switch cover “marked WINE COOLER” – matt white
Knightsbridge Switch cover “marked WASTE DISPOSAL” – white GDWASTEU
Switch cover “marked WASTE DISPOSAL” – white
Knightsbridge Switch cover “marked WASTE DISPOSAL” – matt white
Switch cover “marked WASTE DISPOSAL” – matt white
Knightsbridge Switch cover “marked WARMING DRAWER” – white GDWARMU
Switch cover “marked WARMING DRAWER” – white
Knightsbridge Switch cover “marked WARMING DRAWER” – matt white GDWARMMW
Switch cover “marked WARMING DRAWER” – matt white
Knightsbridge Switch cover “marked FRIDGE” – white GDFRIDGEU
Switch cover “marked FRIDGE” – white
Knightsbridge Switch cover “marked FRIDGE” – matt white GDFRIDGEMW
Switch cover “marked FRIDGE” – matt white
Knightsbridge Switch cover “marked FREEZER” – white GDFREEZERU
Switch cover “marked FREEZER” – white
Knightsbridge Switch cover “marked FREEZER” – matt white GDFREEZERMW
Switch cover “marked FREEZER” – matt white
Knightsbridge Switch cover “marked COFFEE MACHINE” – white GDCOFFU
Switch cover “marked COFFEE MACHINE” – white
Knightsbridge Switch cover “marked COFFEE MACHINE” – matt white GDCOFFMW
Switch cover “marked COFFEE MACHINE” – matt white
Knightsbridge Small Multimedia Combination Plate CU194MM
Small Multimedia Combination Plate
Knightsbridge Screwless RJ45 network outlet – Matt white SFRJ45MW
Screwless RJ45 network outlet – Matt white
Knightsbridge Screwless 13A 2G DP Socket with USB Fastcharge + 2G Modular Combination Plate – Matt White SFR992RMW
Screwless 13A 2G DP Socket with USB Fastcharge + 2G Modular Combination Plate – Matt White
Knightsbridge Screwless 13A 1G switched socket with dual USB charger (2.4A) – matt white SFR9124MW
Screwless 13A 1G switched socket with dual USB charger (2.4A) – matt white
Knightsbridge Rocker cover – laser printed WINE COOLER CUWINE
Rocker cover – laser printed WINE COOLER
Knightsbridge Rocker cover – laser printed WASTE DISPOSAL CUWASTE
Rocker cover – laser printed WASTE DISPOSAL
Knightsbridge Rocker cover – laser printed WARMING DRAWER CUWARM
Rocker cover – laser printed WARMING DRAWER
Knightsbridge Rocker cover – laser printed FRIDGE CUFRIDGE
Rocker cover – laser printed FRIDGE
Knightsbridge Rocker cover – laser printed FREEZER CUFREEZER
Rocker cover – laser printed FREEZER
Knightsbridge Rocker cover – laser printed FAN BOOST CUBOOST
Rocker cover – laser printed FAN BOOST
Knightsbridge Rocker cover – laser printed COFFEE MACHINE CUCOFF
Rocker cover – laser printed COFFEE MACHINE
Knightsbridge 20AX 2-way retractive switch module (centre off) CUGM23
20AX 2-way retractive switch module (centre off)
Knightsbridge 1G 1-WAY TOUCHLESS SWITCH MODULE 50 x 50mm – White NETTS1WH
1G 1-WAY TOUCHLESS SWITCH MODULE 50 x 50mm – White
Knightsbridge 1G 1-way 10-200W (10-100W LED) trailing edge dimmer (Press Type) – matt white GDM014MW
1G 1-way 10-200W (10-100W LED) trailing edge dimmer (Press Type) – matt white
Knightsbridge 13A 2G Switched socket with outboard rockers and dual USB (A+C) 5V DC 4.8A shared CU9002
13A 2G Switched socket with outboard rockers and dual USB (A+C) 5V DC 4.8A shared
![Knightsbridge 13A 1G Switched Socket with dual USB [FASTCHARGE] A+C – Matt White SFR9919MW - West Midland Electrics | CCTV & Electrical Wholesaler](https://wmestore.co.uk/wp-content/uploads/6d794977-f553-4661-bdaa-bc9ea26780e5-1.jpg.webp "Knightsbridge 13A 1G Switched Socket with dual USB [FASTCHARGE] A+C – Matt White SFR9919MW - West Midland Electrics | CCTV & Electrical Wholesaler")
Knightsbridge 13A 1G Switched Socket with dual USB [FASTCHARGE] A+C – Matt White SFR9919MW
13A 1G Switched Socket with dual USB [FASTCHARGE] A+C – Matt White
Knightsbridge 120° PIR Sensor Module w/override 50 x 50mm – White NETPIRSWH
120° PIR Sensor Module w/override 50 x 50mm – White
Knightsbridge 120° PIR Sensor Module 50 x 50mm – White NETPIRWH
120° PIR Sensor Module 50 x 50mm – White
Knightsbridge Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Matt White SFR192RMW
Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Matt White
Knightsbridge 13A 2G Switched socket with outboard rockers and dual USB (A+C) QC18W / PD45W CU9003
13A 2G Switched socket with outboard rockers and dual USB (A+C) QC18W / PD45W
Knightsbridge Curved Edge 13A 1G DP Lockable socket CU9LOCK
Curved Edge 13A 1G DP Lockable socket
Knightsbridge 20AX 1G 2-way SP Grid Toggle Switch – matt white GDM01TOGMW
20AX 1G 2-way SP Grid Toggle Switch – matt white
Knightsbridge 20AX 1G DP Toggle switch – matt white GDM02TOGMW
20AX 1G DP Toggle switch – matt white
Knightsbridge 20AX Intermediate Grid Toggle Switch – matt white GDM05TOGMW
20AX Intermediate Grid Toggle Switch – matt white
Knightsbridge 1G 2-way 10-150W (5-100W LED) intelligent dimmer – matt white GDM150IMW
1G 2-way 10-150W (5-100W LED) intelligent dimmer – matt white
Knightsbridge 1G 2-way 10-150W (5-100W LED) intelligent dimmer – white GDM150IU
1G 2-way 10-150W (5-100W LED) intelligent dimmer – white
Knightsbridge Dual USB charger A+C (18W QC / 45W USB-PD) 50 x 50mmm – white NETUSBPDWH
Dual USB charger outlet suitable for use with euro-module faceplates.
– 50 x 50mm
– Dual USB charger A + C (18W QC / 45W USB-PD)
– Max. Output: 45W
– Certified to BS EN 62368
Knightsbridge 13A Switched Fused Spur with Neon and Flex Outlet – Matt White SF6300FMW
Fused spur solution in flawless Screwless low profile metal design with matching fuse holder and rocker
– 13A rated
– Switched
– With neon and flex outlet
– Screwless low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge 45A 1G DP switch with neon – matt white SF81MNMW
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient.
– 45A
– Double pole
– With neon indicator
– Minimum mounting box depth: 47mm
Knightsbridge Shaver socket with dual USB A+C (5V DC 2.4A shared) – matt white SF8909MW
- 230VAC 20VA
- IP41
- Single Voltage Shaver Socket
- Screwless low profile design with built in gasket
- Built in dual USB charger with Type-A and Type-C connections (5V DC 2.4A) (shared)
- Certified to EN 61558
- Minimum mounting box depth: 47mm
Knightsbridge 32A 1G Key Card Switch – matt white SFCARDMW
Ideal for Hotel rooms, flawless Screwless low profile metal design. Generally used to activate power and lighting in hotel rooms via the rooms key card.
Power is cut to the room 30 seconds after withdrawal of the key card.
– 32A rated
– Back light arrow to aid activation in dark room
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 47mm
Knightsbridge Screwless 13A 2G DP Socket + 2G Modular Combination Plate – Matt White SFR192LMW
Essential for any major upgrade, renovation or new build. The Screwless Socket and 2G Modular Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
Product code explanation:
– “L” – designates 2G Socket on the left and 2G modular on the right
– “R” designates 2G Socket on the right and 2G modular on the left
Features
– 230V 13A
– Double Pole Switches
– 1 x 2G Double Sockets with Twin Earth
– Space for up to 2 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Small Multimedia Combination Plate – Matt White SFR194MW
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 1 x 2G Double Sockets with Twin Earth
– Space for up to 4 x Euro module inserts (25 x 50mm)
Knightsbridge Screwless Combination Plate – Matt White SFR298MW
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
Knightsbridge 45A DP Switch and 13A switched socket with dual USB charger – matt white SFR83UMMW
Cooker control units enable isolation of the unit so that maintenance and repairs to be carried out separately. The unit can be switched off, preventing the appliance from being turned on accidentally – for example whilst cleaning. Control two or more cooking appliances in the same room, providing rating is sufficient. This model combines a 45A switch with a 13A socket and the additional benefit of a built in dual USB Charger 5V DC 2.4A making use of what would normally be unused space.
– 45A
– Double pole
– 13A switched socket
– Dual USB Charger 5V DC 2.4A
– Minimum mounting box depth: 47mm
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge Screwless 13A 2G DP Socket with USB Fastcharge + 2G Modular Combination Plate – Matt White SFR992LMW
Essential for any major upgrade, renovation, or new build. The Screwless Socket and 2G Modular Combination Plate allows for a power, fast charge USB and bespoke modular solutions to be combined in one area. Capable of delivering a 0-50% charge to compatible USB devices in under 30 mins. Offering both legacy USB-A for older phones and the latest USB-C for modern devices.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements.
Product code explanation:
– “L” – designates 2G Socket on the left and 2G modular on the right
– “R” designates 2G Socket on the right and 2G modular on the left
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Dual USB outlets C+A
– 5V DC 4.0A [shared]
– Compatible with QC (Quick Charge) and USBPD (USB Power Delivery)
– Space for up to 2 x Euro module inserts (25x50mm or 1 x 50x50mm)
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– USB sockets capable of delivering up to 18W
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
– Min. mounting box depth of 35-47mm depending on wiring conditions we recommend product code GSK335D (35mm) or GSK347D (47mm) for use with this product
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Small Multimedia Combination Plate with FASTCHARGE – Matt White SFR994MW
Essential for any major upgrade, renovation or new build. The Screwless Small Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Space for up to 4 x Euro module inserts (25x50mm)
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge Screwless Combination Plate with Dual USB FASTCHARGE A+C – Matt White SFR998MW
Essential for any major upgrade, renovation or new build. The Screwless Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, or Networking.
Knightsbridge FASTCHARGE USB sockets can deliver a 0-50% charge in under 30 minutes with compatible devices.
FASTCHARGE is achieved by the intelligent switching of voltages between 5V to up to 12V to optimize and deliver the maximum input your device can handle. Your device decides how much power it’s going to draw down.
Devices that support QC3.0 (many Android based devices) can use the USB-A port to achieve up to 18W. Devices that support USB-PD (many Android based devices and iPhone8 or above) can use the USB-C port to achieve up to 18W. If a legacy device does not support these then up to 10W can be achieved from the USB-A port, or up to 15W from the USB-C port
Features
– Double pole switches provide additional safety
– Twin earthing points for high integrity earthing requirements
– Constructed from high quality components and materials to ensure the longevity of the install
– Fully certified to the latest British Safety Standards
Benefits
– Over Voltage Category III – suitable for domestic and commercial installations
– Built in overheat and overload protection
– ErP Ready (0.1W in stand-by mode)
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY
Knightsbridge 13A 1G DP Lockable socket – Matt White with white insert SFR9LOCKMW
Lockable sockets are ideal for use in communal areas such as hotel and apartment corridors or areas where you need to restrict unsupervised usage.
– 13A 230V
– Double Pole
– Key lock On or Off (incl. 2 keys)
– Designed to restrict unauthorised use
Knightsbridge 230V 1G 1-way Touchless Switch – Matt White SFTS1MW
Perfect solution for preventing the transfer of germs and bacteria in both domestic and commercial environments.
– Gesture sensor control ON/OFF
– Sensor distance: Max. 3cm
– Requires neutral wire
– Min. mounting box depth: 25mm
– Screwless low profile design with built-in gasket
Knightsbridge 13A 2G Switched socket with outboard rockers and dual USB (A+C) QC18W / USB-PD 45W SN9003
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Outboard rockers
– Built in Dual USB Charger
– Type-A QC 18W / Type-C USB-PD 45W
– Top access to captive terminals to speed up installation.
– Twin earths.
– Min. Mounting box depth: 25-35mm dependent on wiring conditions
– Certified to BS 1363-2, EN 61000
– Packed in Individual Knightsbridge rip top polybag with euro slot
NB: Requires 35mm deep pattress box if surface mounting (CU1800)
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge 13A 2G Smart Switched Socket CU9KW
- 230V, 13A (Max. Load 2990W)
- Minimum Mounting Box Depth: 25-35mm (depending on wiring conditions)
- Control an appliance, like a table lamp, or cabinet lighting from your smartphone or tablet via the SmartKnight app at home or away
- Set up a schedule or use the timer function for things to switch on and off
- A power monitoring function is also provided in the app (total usage)
- Fully compatible with Amazon Alexa or Google Assistant. Just give a voice command to turn on/off the outlet (e.g. ‘Alexa, turn off the living room lamp’)
- Wi-Fi Connectivity IEEE 802 11 b/g/n (2.4Ghz only) if you have a Dual Band system simply disable the 5Ghz frequency in your Wi-Fi Router* during set up and then enable again once set up is complete
- 2 year warranty
Knightsbridge Multimedia Combination Plate CU298MM
Essential for any major upgrade, renovation or new build. The Curved Edge Multimedia Combination Plate allows for a power and bespoke signal distribution solution to be combined in one area.
Compatible with our extensive range of modular inserts this plate can be configured to suit your requirements, be it Satellite TV, DAB, Telecoms, Networking or even USB Charging.
– 230V 13A
– Double Pole Switches
– 2 x 2G Double Sockets with Twin Earth
– Space for up to 8 x Euro module inserts (25 x 50mm)
– Dimensions: (H) 175mm x (W) 295mm x (P) 7mm
Knightsbridge 10AX 2-Way Pull Cord Switch – Matt White 8300MW
Ideal for bathrooms and utility rooms.
– 10AX rated
– 2-way
– With approx. 1.5m pull cord
– Metal Matt White finish with white pull cord tip
– Certified to EN 60669-1
Knightsbridge 45A DP Cooker Switch and 13A Socket with Neons (White Rocker) SN8333NW
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A DP Cooker Switch
– 13A Switched Socket
– With neon indicators
– Laser printed for cleaner look and longevity
– Includes screw cap covers
– Certified to BS 4177, BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 45A DP Cooker Switch and 13A Socket (White Rocker) SN8333W
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A DP Cooker Switch
– 13A Switched Socket
– Laser printed for cleaner look and longevity
– Includes screw cap covers
– Certified to BS 4177, BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 45A 1G DP Switch with Neon (White Rocker) SN8331NW
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A rated
– Double Pole
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A DP Cooker Switch and 13A Socket with Neons (White Rocker) CU8333NW
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A DP Cooker Switch
– 13A Switched Socket
– With neon indicators
– Laser printed for cleaner look and longevity
– Includes screw cap covers
– Certified to BS 4177, BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A 2G DP Switch with Neon (White Rocker) CU8332NW
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A rated
– Double Pole
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A 2G DP Switch (White Rocker) CU8332W
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A 1G DP Switch with Neon (White Rocker) CU8331NW
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A rated
– Double Pole
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 45A 1G DP Switch (White Rocker) CU8331W
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 6A 1G 2-way Dummy Dimmer Module – Matt White GDM022MW
Light switch in the outlook of a dimmer. Designed to be used on grid faceplates where you require the outlook of a dimmer but the function of just a switch.
– 6A rated
– 2-way
– Push on/off function
Knightsbridge 6A 1G 2-way Dummy Dimmer Module – White GDM022U
Light switch in the outlook of a dimmer. Designed to be used on grid faceplates where you require the outlook of a dimmer but the function of just a switch.
– 6A rated
– 2-way
– Push on/off function
Knightsbridge 10A Fan Isolator Key Switch Module – Matt white GDM021MW
Single sized grid fan isolator module. Module simply clips into position from front of the mounting frames (sold seperately)
– 10A
– Triple Pole
– Key switch operation to prevent unauthorized on/off (key included)
– Engraved FAN ISOLATOR
– Rated conditional short circuit current (Inc) 1500A
– For use with the Knightsbridge Grid system
Knightsbridge 10A Fan Isolator Key Switch Module – White GDM021U
Single sized grid fan isolator module. Module simply clips into position from front of the mounting frames (sold seperately)
– 10A
– Triple Pole
– Key switch operation to prevent unauthorized on/off (key included)
– Printed FAN ISOLATOR
– Rated conditional short circuit current (Inc) 1500A
– For use with the Knightsbridge Grid system
Knightsbridge 10A Fan Isolator Module – Matt White GDM020MW
Single sized grid fan isolator module. Module simply clips into position from front of the mounting frames (sold separately)
– 10A
– Triple Pole
– Engraved FAN ISOLATOR
– Rated conditional short circuit current (Inc) 1500A
– For use with the Knightsbridge Grid system
Knightsbridge 10A Fan Isolator Module – White GDM020U
Single sized grid fan isolator module. Module simply clips into position from front of the mounting frames (sold separately)
– 10A
– Triple Pole
– Laser printed FAN ISOLATOR
– Rated conditional short circuit current (Inc) 1500A
– For use with the Knightsbridge Grid system
Knightsbridge 2G Fold Away Phone Holder – White 2GPHW
Handy flip down Phone holder for use with Double switched sockets with USB charging facility.
– 2 piece install – no need to remove socket from wall
– Sits behind the existing Double Switched Socket
– Fold down shelf for supporting your device whilst charging, fold up when not in use
NB: Shown with CU9904 – Socket, Phone and Cable not included
Knightsbridge 5A unswitched round socket module 50 x 50mm – white NET5AWH
Power outlet suitable for use with euro-module faceplates.
– 50 x 50mm
– 5A rated
– Unswitched
– Certified to BS 546
Knightsbridge 1G 2-way 10-200W (10-100W LED) trailing edge dimmer – white GDM200U
1G 2-way trailing edge dimmer module for use with the Knightsbridge Screwless or Flat Plate systems.
– 10-200W Incandescent
– 10-100W LED
– 2-way
– Press on/off operation
– Trailing edge dimmer technology
– Certified to EN 60669-2
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
WE RECOMMEND A MAXIMUM OF 10-12 LAMPS PER GRID DIMMER TO PREVENT ANY INRUSH CURRENT PROBLEMS
Knightsbridge 13A 2G Unswitched Socket SN9000U
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Unswitched
– Includes screw cap covers
– Min. mounting box depth: 25mm
– Certified to BS 1363-2
– Packed in individual Knightsbridge rip top polybag with euro slot
Knightsbridge 13A 1G Unswitched Socket SN7000U
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Unswitched
– Includes screw cap covers
– Min. mounting box depth: 25mm
– Certified to BS 1363-2
– Packed in individual Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless 13A socket,USB chargers (2.4A) and Bluetooth Speaker – Matt white SFR9905MW
– Innovative and simple solution, ideal for kitchens for music while you cook, equally suitable for bedrooms and hotel rooms
– 13A Switched Socket
– Dual USB Charger (5V DC 2.4A shared)
– 3W RMS Bluetooth Speaker (on/off button to connect via Bluetooth)
– Can be used for playback via Alexa
– Screwless design matching colours to our extensive Screwless Switches and Sockets Range
– Certified for EMC and LVD
– RED compliant
– ErP Ready – to ensure power saving when not in use
WE RECOMMEND YOU ONLY USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge Screwless 13A switched socket with quad USB charger (5.1A) – matt white SFR7USB4MW
Ideal solution for multiple users, combining a 13A switched socket with a Quad USB charger. Screwless low profile metal design with matching metal rockers. Perfect for Coffee shops. foyers, receptions, hotel rooms etc.
– 13A Switched socket
– Quad USB Charging 5V DC5.1A (shared)
– Dedicated 2.1A outlet for tablets
– 3 outlets sharing 3A for multiple smart phones and other devices
– Screwless low profile design with built in gasket
– Certified to BS1363-2
– EMC Certified and ErP Ready
– Minimum mounting box depth 25-35mm*
*dependent on wiring conditions
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge Curved Edge 3G 40-400W Dimmer CU2163
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 3G 2-way
– 40-400W for incandescent lamps
– 3-100W for LED
– Push on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge 3G 40-400W Dimmer Switch SN2163
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 3G 2-way
– 40-400W for incandescent lamps
– 3-100W for LED
– Push on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge 13A 2G Switched Socket with Dual USB Charger (2.4A) – Matt White SFR9224MW
This charger socket is a great finishing touch to any modern home. Screwless low profile metal design with matching metal rockers. Built in Dual USB Charger
– 13A Switched sockets
– Dual USB Charging 5V DC2.4A (shared)
– Screwless low profile design with built in gasket
– Certified to BS1363-2:2016, EN 62368-1, EN 62680-1-1, EMC and ErP Certified
– Minimum mounting box depth 25-35mm*
*dependent on wiring conditions
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge Dual USB charger module (2 x grid positions) 5V 2.4A (shared) – white GDM016U
Module simply clips into position from the front of the mounting frames (sold separately)
– Dual USB Charging module
– 5V DC 2.4A (shared)
– Require 2 grid positions
– For use with the Knightsbridge Grid system
– Certified to EN 62368-1:2014+A11:2017
NB: This module requires 2 grid position side by side to mount
Knightsbridge Dual USB charger module (2 x grid positions) 5V 2.4A (shared) – matt white GDM016MW
Module simply clips into position from the front of the mounting frames (sold separately)
– Dual USB Charging module
– 5V DC 2.4A (shared)
– Require 2 grid positions
– For use with the Knightsbridge Grid system
– Certified to EN 62368-1:2014+A11:2017
NB: This module requires 2 grid position side by side to mount
Knightsbridge Curved Edge 2G 40-400W Dimmer CU2162
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 2G 2-way
– 40-400W for incandescent lamps
– 3-100W for LED
– Push on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge 1G 1-way 60-1000W Dimmer Switch SN2165
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 1G 1-way
– 60-1000W for incandescent lamps
– Twist on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge 2G 40-400W Dimmer Switch SN2162
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 2G 2-way
– 40-400W for incandescent lamps
– 3-100W for LED
– Push on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge Screwless 115/230V Dual Voltage Shaver Socket – Matt White SF8900MW
Perfect upgrade to any bathroom, dual voltage shaver socket, flawless Screwless low profile metal design.
– 115/230VAC 20VA
– IP41
– Dual Voltage Shaver Socket
– Screwless low profile design with built in gasket
– Certified to EN 61558
– Minimum mounting box depth: 47mm
Knightsbridge Screwless 10AX 6G 2-Way Switch – Matt White SF4200MW
Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Curved Edge 13A 2G Switched Socket with Dual USB Charger (5V DC 3.1A shared) CU9904
Gently contoured 7mm plate with rounded edges and anti-microbial properties, includes screw cap covers.
– 13A rated
– Built in Dual USB Charger 5V DC 3.1A (shared)
– Top access to captive terminals to speed up installation.
– Twin earths.
– Min. Mounting box depth: 25-35mm dependent on wiring conditions
– Certified to BS 1363-2, EN 60950-1
– Packed in Individual Knightsbridge rip top polybag with euro slot
NB: Requires 35mm deep pattress box if surface mounting (CU1800)
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge 13A 2G Switched Socket with Dual USB Charger 5V DC 3.1A SN9904
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Built in Dual USB Charger 5V DC 3.1A (shared)
– Top access to captive terminals to speed up installation
– Twin earths
– Includes screw cap covers
– Min. mounting box depth: 25mm-35mm dependent on wiring conditions
– Certified to BS 1363-2, EN 60950-1
– Packed in individual Knightsbridge rip top polybag with euro slot
NB: Requires 35mm deep pattress box if surface mounting (SN1800)
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge 45A DP Pull Cord Switch with Neon SN8310N
This model is intended for use in controlling circuits in bathrooms such as electric showers
– 45A rated
– Double Pole
– With neon indicator
– With mechanical On/Off indicator
– With approx. 1.7m pull cord
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in rip top Knightsbridge polybag with euro slot
Knightsbridge Screwless 10AX 4G 2-Way Switch – Matt White SF4100MW
Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Curved Edge 13A 1G Switched Socket with USB Charger (5V DC 2.1A) CU9903
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 13A rated
– Built in USB Charger 5V DC 2.1A
– Includes screw cap covers
– Min. Mounting box depth: 25mm
– Certified to BS 1363-2, EN 60950-1
– Packed in Individual Knightsbridge rip top polybag with euro slot
NB: requires 35mm deep patress box if surface mounting (CU1700)
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge 13A 1G Switched Socket with USB Charger 5V DC 2.1A SN9903
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Built in USB Charger 5V DC 2.1A
– Includes screw cap covers
– Min. mounting box depth: 25mm-35mm dependent on wiring conditions
– Certified to BS 1363-2, EN 60950-1
– Packed in individual Knightsbridge rip top polybag with euro slot
NB: Requires 35mm deep pattress box if surface mounting (SN1700)
WE RECOMMEND YOU ALWAYS USE CERTIFIED USB CABLES FOR SAFETY AND TO ENSURE COMPATIBILITY
Knightsbridge Screwless 13A 2G DP switched socket – Matt white SFR9000MW
Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rockers, unique socket insert design that is completely hidden once a plug is inserted.
– 13A 2G Switched Socket
– Double Pole Switches
– Fitted with twin earth terminals
– Screwless low profile design with built in gasket
– Certified to BS 1363-2
– Minimum mounting box depth 25mm
Knightsbridge 1G 40-400W Dimmer Switch SN2161
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 1G 2-way
– 40-400W for incandescent lamps
– 3-100W for LED
– Push on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge Curved Edge 45A DP Switch and 13A Switched Socket with neons CU8333N
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 45A DP Cooker Switch
– 13A Switched Socket
– With neon indicators
– Laser printed for cleaner look and longevity
– Includes screw cap covers
– Certified to BS 4177, BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless 20A 1G DP Switch with Neon – Matt White SF8341NMW
Ideal for fixed appliances such as water heaters, flawless Screwless low profile metal design with matching rocker
– 20A rated
– Double pole
– Switched
– With neon indicator
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth 25mm
Knightsbridge Quadplexed SAT1/SAT2/TV/FM DAB Outlet Module 50 x 50mm – White NETQDWH
Fully screened Satellite, TV and FM/DAB aerial triplexed outlet with separate Sat 2 outlet. Ideal for Skyâ„¢ and Sky+â„¢ applications with low loss, minimal ingress and negligible module cross talk with excellent matching and isolation.
– Fully screened to EN 50083-2.
– Easy cable connections and access.
– Suitable for cables with 1mm conductor (PF100, H109F, QF100, etc.).
– Min mounting depth 35mm.
– Size: 50 x 50mm
Knightsbridge Screwless 20A 1G DP Switch – Matt White SF8341MW
Ideal for fixed appliances such as water heaters, flawless Screwless low profile metal design with matching rocker
– 20A rated
– Double pole
– Switched
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box depth 25mm
Knightsbridge Screwless 1G TV and SAT TV outlet (isolated) – Matt white SF0140MW
Ideal for TV/Coax and SAT TV/F-type connections (Isolated). Isolated outlets are for use with communal dishes and aerial installations. The isolated socket blocks interference from neighboring installs i.e. an apartment block. Flawless Screwless design
– 1 x Coaxial TV outlet
– 1 x F-Type SAT TV Outlet
– Isolated
– Screwless low profile design with built in gasket
– Certified to BS5733
– Minimum mounting box depth: 25mm
Knightsbridge Screwless 10AX 3 pole fan isolator switch – Matt white SF1100MW
Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance. Flawless Screwless low profile metal design with matching metal rocker.
– 10AX rated
– Triple Pole
– Screwless low profile design with built in gasket
– Rated conditional short circuit current (Inc) 1500A
– Certified to EN 60669-1, EN 60669-2-4
– Minimum mounting box 16mm
Knightsbridge Triplexed TV /FM DAB/ SAT TV Outlet Module 50 x 50mm – White NETTRIWH
Fully screened Satellite, TV and FM DAB aerial outlet. Low loss, minimal ingress and negligible module cross talk with excellent matching and isolation.
– Fully screened to EN 50083-2.
– Easy cable connections and access.
– Suitable for cables with 1mm conductor (PF100, H109F, QF100, etc.).
– Min mounting depth 35mm.
– Size: 50 x 50mm
Knightsbridge Curved edge 12G grid faceplate CUG12
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
12G Curved Edge Grid Faceplate
– Use in conjunction with 3 x CUG2F (sold separately)
– Supports 12 Curved Edge Grid Modules
– Includes screw cap covers
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Screwless 5A Unswitched Round Socket – Matt White SF5AMW
Ideal for use in custom lighting solutions, flawless Screwless low profile metal design.
– 5A round pin socket
– Unswitched
– Screwless low profile design with built in gasket
– Certified to BS 546
– Minimum mounting box depth 25mm
Knightsbridge 45A 1G DP Switch SN8331
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A rated
– Double Pole
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Diplexed TV /SAT TV Outlet Module 50 x 50mm – White NETDISATWH
Fully screened TV and SAT TV outlet. Low loss, minimal ingress and negligible module cross talk with excellent matching and isolation.
– Fully screened to EN 50083-2.
– Easy cable connections and access.
– Suitable for cables with 1mm conductor (PF100, H109F, QF100, etc.).
– Min mounting depth 35mm.
– Size: 50 x 50mm
Knightsbridge 13A Switched Fused Spur Unit with Neon SN6300N
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Switched Fused Spur unit
– With neon indicator
– With flex outlet from base
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 13A Fused Spur Unit with Neon SN6000N
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Fused Spur unit
– With neon indicator
– With flex outlet from base
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 9″ T2 BC Pendant Set – 3-Plate SN8280
Pendant lamp holder. Pre-wired to reduce time on installation.
– T2 rated 100W Incandescent / Max. 8W LED
– Fixed drop
– Short skirt
– Pre-wired
– Terminal capacity: 2 x 1.5mm²
– Certified to BS EN 60589-2-1, BS EN 60598-1
– Supplied in rip top Knightsbridge polybag with euro slot
Knightsbridge 20A Flex Outlet Plate SN8342
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 20A rated
– Flex outlet
– Cable entry/exit from centre or base
– Includes screw cap covers
– Certified to BS 5733
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge TV and SAT TV Outlet (non-isolated) SN0140
Hard Wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 1 x Coaxial TV outlet
– 1 x F-Type SAT TV outlet
– Non-isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 10AX 3G 2-Way Switch SN4000
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 10AX rated
– 3G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 13A 1G unswitched socket module 50 x 50mm – white NET13WH
Power outlet suitable for use with euro-module faceplates.
– 50 x 50mm
– 13A rated
– Unswitched
– Certified to BS 1363
Knightsbridge Telephone Master Outlet Module 25 x 50mm (IDC) – White NETBTMWH
Telecoms outlet suitable for use with euro-module faceplates.
– 25 x 50mm
– Master BT outlet
– IDC terminals
– Certified to BS 5733
Knightsbridge UTP CAT6 RJ45 Outlet Module 25 x 50mm – White NETCAT6WH
Networking outlet suitable for use with euro-module faceplates.
– 25 x 50mm
– UTP CAT6
– RJ45 socket
– IDC terminals
Knightsbridge RJ11 Outlet Module 25 x 50mm (IDC) – White NETRJ11WH
Telecoms outlet suitable for use with euro-module faceplates.
– 25 x 50mm
– RJ11 outlet
– IDC terminals
– Certified to BS 5733
Knightsbridge 13A 2G DP Switched Socket with twin earths SN9000
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Double Pole
– Top access to captive terminals to speed up installation
– Twin earths
– Includes screw cap covers
– Min. mounting box depth: 25mm
– Certified to BS 1363-2:2016+A1:2018
– ASTA approved License No. 1412
– Packed in individual Knightsbridge rip top polybag with euro slot
Knightsbridge 10A 2-Way Pull Cord switch SN8300
Ideal for bathrooms and utility rooms.
– 10AX rated
– 2-way
– With approx. 1.7m pull cord
– Certified to EN 60669-1
– Supplied in rip top Knightsbridge polybag with euro slot
Knightsbridge 13A 1G DP Switched Socket – ASTA approved SN7000
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Double Pole
– Includes screw cap covers
– Min. mounting box depth: 25mm
– Certified to BS 1363-2:2016+A1:2018
– ASTA approved License No. 1412
– Packed in individual Knightsbridge rip top polybag with euro slot
Knightsbridge Telephone Master Socket SN7300
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– Master BT type socket
– Screw terminals
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved edge 4G grid faceplate CUG4
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
4G Curved Edge Grid Faceplate
– Use in conjunction with 1 x CUG2F (sold separately)
– Supports 4 Curved Edge Grid Modules
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Curved edge 3G grid faceplate CUG3
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
3G Curved Edge Grid Faceplate
– Use in conjunction with 1 x CUG2F (sold separately)
– Supports 3 Curved Edge Grid Modules
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge 13A 1G SP Switched Socket – ASTA approved SN7000S
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Single Pole
– Includes screw cap covers
– Min. mounting box depth: 25mm
– Certified to BS 1363-2:2016+A1:2018
– ASTA approved License No. 1412
– Packed in individual Knightsbridge rip top polybag with euro slot
Knightsbridge 6A DP Inline Cord Switch – White ST6AWH
Compact, re-wireable inline cord switch for low wattage lamps / table lamps.
– 6A 230V
– Double Pole
– Suitable for 2 or 3 core lighting cable
– Terminal capacity: 0.75-1.5mm
– Certified to BS EN 61058
– Supplied in Knightsbridge polybag
Knightsbridge Coax TV Outlet (isolated) SN0120
Hard Wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– Coaxial TV outlet
– Isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Telephone Extension Socket SN7400
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– Extension BT type socket
– Screw terminals
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Twin Coax TV Outlet (non-isolated) SN0110
Hard Wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– Twin Coaxial TV outlet
– Non-isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Switch cover “marked WASHING MACHINE” – matt white GDWASHMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked OVEN” – matt white GDOVENMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked MICROWAVE” – matt white GDMICROMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked HOB” – matt white GDHOBMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked FRIDGE/FREEZER” – matt white GDFRIDMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked FAN” – matt white GDFANMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked TUMBLE DRYER” – matt white GDDRYMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked DISHWASHER” – matt white GDDISHMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked COOKER HOOD” – matt white GDCOOKMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked BOILER” – matt white GDBOILMW
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge 10AX 1G 2-Way Architrave Switch SN127
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 10AX rated
– 1G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 13A Plug Top with 13A fuse – White (Screw Cord Grip) SN1383
Domestic use plug top
– 13A rated
– Fitted with 13A fuse
– Screw type cord grip
– BSI Kitemarked
– Certified to BS 1363-2
– Supplied in bulk in Knightsbridge inner carton
Knightsbridge 13A Plug Top with 3A fuse – White (Screw Cord Grip) SN1382
Domestic use plug top
– 13A rated
– Fitted with 3A fuse
– Screw type cord grip
– BSI Kitemarked
– Certified to BS 1363-2
– Supplied in bulk in Knightsbridge inner carton
Knightsbridge 13A Plug Top with 5A Fuse – White (Screw Cord Grip) SN1381
Domestic use plug top
– 13A rated
– Fitted with 5A fuse
– Screw type cord grip
– BSI Kitemarked
– Certified to BS 1363-2
– Supplied in bulk in Knightsbridge inner carton
Knightsbridge 10AX 1G 2-Way Switch SN2000
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 10AX rated
– 1G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge SAT TV Outlet Module 25 x 50mm – White NETSATWH
SAT TV outlet suitable for use with euro-module faceplates.
– 25 x 50mm
– F-type connection
– F-type coupler connection
– Certified to BS 5733
Knightsbridge Switch cover “marked HOB” – white GDHOBU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked WASHING MACHINE” – white GDWASHU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked OVEN” – white GDOVENU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked MICROWAVE” – white GDMICROU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked FRIDGE/FREEZER” – white GDFRIDU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked FAN” – white GDFANU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked TUMBLE DRYER” – white GDDRYU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked DISHWASHER” – white GDDISHU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked COOKER HOOD” – white GDCOOKU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Switch cover “marked BOILER” – white GDBOILU
Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.
Knightsbridge Rocker cover printed “TUMBLE DRYER” CUDRY
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Rocker cover printed “HOB” CUHOB
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Rocker cover printed “WASHING MACHINE” CUWASH
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Rocker cover printed “COOKER HOOD” CUHOOD
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Rocker cover printed “MICROWAVE” CUMICRO
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Rocker cover printed “FRIDGE FREEZER” CUFRID
Designed and finished to coordinate with the Curved Edge Switches & Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Rocker cover printed “OVEN” CUOVEN
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Rocker cover printed “BOILER” CUBOIL
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Rocker cover printed “FAN” CUFAN
Designed and finished to coordinate with the Curved Edge Switches and Sockets range.
– Laser printed replaceable/interchangeable rocker cover
– Simply remove existing rocker and replace with the desired designation from the range
FOR USE WITH CURVED GRID SYSTEM ONLY
Knightsbridge Curved Edge 4G 40-400W Dimmer CU2164
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 4G 2-way
– 40-400W for incandescent lamps
– 3-100W for LED
– Push on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge 4G 40-400W Dimmer Switch SN2164
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 4G 2-way
– 40-400W for incandescent lamps
– 3-100W for LED
– Push on/off operation
– Leading edge dimmer
– Includes screw cap covers
– Certified to EN 60669-2-1
– Supplied in Knightsbridge rip top polybag with euro slot
NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY
Knightsbridge 115/230V Dual Voltage Shaver Socket with Neon SN8900N
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 115V/230VAC 20VA
– Dual Voltage Shaver Socket
– With neon
– Includes screw cap covers
– Laser printed for cleaner look and longevity
– Certified to BS EN 61558
– Supplied in Knightsbridge slide packaging
Knightsbridge Screwless Telephone Master Socket – Matt White SF7300MW
The master socket contain a surge arrestor and an R/C circuit filter these are used by your service provider to get a fixed value resistance when they run line checks. Standard BT type socket with screw type terminals. Flawless Screwless design
– Master BT type socket
– Screw terminals
– Screwless low profile design with built in gasket
– Certified to BS 5733
– Minimum mounting box depth: 25mm
Knightsbridge 45A DP Cooker Switch and 13A Socket with Neons SN8333N
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A DP Cooker Switch
– 13A Switched Socket
– With neon indicators
– Laser printed for cleaner look and longevity
– Includes screw cap covers
– Certified to BS 4177, BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 45A DP Cooker Switch and 13A Socket SN8333
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A DP Cooker Switch
– 13A Switched Socket
– Laser printed for cleaner look and longevity
– Includes screw cap covers
– Certified to BS 4177, BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge HDMI outlet module 25 x 50mm – white NETHDMIWH
HDMI outlet suitable for use with euro-module faceplates.
– 25 x 50mm
– HDMI socket
– HDMI socket on 100mm cable for easy cable management at rear
– HDMI v1.4
Knightsbridge Screwless 13A Switched Fused Spur Unit with Neon – Matt White SF6300NMW
Fused spur solution in flawless Screwless low profile metal design with matching fuse holder and rocker
– 13A rated
– Switched
– With neon indicator
– Screwless low profile design with built in gasket
– Certified to BS 1363-4
– Minimum mounting box depth 25mm
Knightsbridge Screwless 10AX 3G 2-Way Switch – Matt White SF4000MW
Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Screwless 13A 1G DP switched socket – Matt white with white insert SFR7000MW
Perfect finishing touch to any modern home, flawless Screwless Flat Plate metal design with matching metal rocker, unique socket insert design that is completely hidden once a plug is inserted.
– 13A 1G Switched Socket
– Double Pole Switch
– Screwless low profile design with built in gasket
– Certified to BS 1363:2
– Minimum mounting box depth 25mm
Knightsbridge Screwless 10AX 1G intermediate switch – Matt white SF1200MW
An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly. Flawless Screwless low profile metal design with matching metal rocker.
– 10AX rated
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge 45A 2G DP Switch with Neon SN8332N
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A rated
– Double Pole
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless 10AX 2G 2-Way Switch – Matt White SF3000MW
Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge 45A 1G DP Switch with Neon SN8331N
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 45A rated
– Double Pole
– With neon indicator
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Screwless 10AX 1G 2-Way Switch – Matt White SF2000MW
Perfect finishing touch to any modern home, flawless Screwless low profile metal design with matching metal rocker.
10AX 2-way switches are generally used when there are two entrances to a room, where there is a switch positioned at either entrance requiring joint control of the lighting.
– 10AX rated
– Screwless low profile design with built in gasket
– Certified to EN 60669-1
– Minimum mounting box 16mm
Knightsbridge Curved Edge 10AX 4G 2-Way Switch (on single plate) CU4101
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 10AX rated
– 4G 2-way on single plate
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 45A Cooker Connection Unit SN8340
Hard wearing, all purpose Square Edge 23mm plate with anti-microbial properties
– 45A rated
– Concealed fitting, large capacity easy to wire terminals
– Clamp fitted with a bottom knockout for outgoing cable
– Includes screw cap covers
– Certified to BS 5733
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 10AX 4G 2-Way Switch SN4100
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 10AX rated
– 4G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Screened SAT TV Outlet Module 25 x 50mm – White NETSATSWH
Fully screened single satellite F type outlet. Low loss, minimal ingress and negligible module cross talk with excellent matching and isolation.
– Fully screened to EN 50083-2.
– Easy cable connections and access.
– Suitable for cables with 1mm conductor (PF100, H109F, QF100, etc.).
– Min mounting depth 35mm.
– Size: 25 x 50mm
Knightsbridge 13A Switched Fused Spur Unit SN6300
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 13A rated
– Switched Fused Spur unit
– With flex outlet from base
– Includes screw cap covers
– Certified to BS 1363-2
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 10AX 3 Pole Fan Isolator Switch SN1100
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties. Ideal for providing a safe and simple method of isolating fan units in en-suite bathrooms, family bathrooms, utility rooms, store rooms etc. Often the fan unit will be wired into the lighting circuit for convenience and efficiency. With this kind of installation there is often a need to leave the lighting circuit live whilst isolating the fan for maintenance
– 10A
– Triple pole
– Rated conditional short circuit current (Inc) 1500A
– Certified to EN 60669-1, EN 60669-2-4
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euroslot
Knightsbridge Telephone Secondary Outlet Module 25 x 50mm (IDC) – White NETBTSWH
Telecoms outlet suitable for use with euro-module faceplates.
– 25 x 50mm
– Extension BT outlet
– IDC terminals
– Certified to BS 5733
Knightsbridge 10AX 1G Intermediate Switch SN1200
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties. An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i.e. the one at the top of the stairs) in order for all the switches to function properly.
– 10AX rated
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge UTP CAT5E RJ45 Outlet Module 25 x 50mm – White NETCAT5WH
Networking outlet suitable for use with euro-module faceplates.
– 25 x 50mm
– UTP CAT5e
– RJ45 socket
– IDC terminals
Knightsbridge 10AX 2G 2-Way Switch SN3000
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 10AX rated
– 2G 2-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Coax TV Outlet (non-isolated) SN0100
Hard Wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– Coaxial TV outlet
– Non-isolated
– Includes screw cap covers
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge 10AX 1G 1 Way Switch SN1000
Hard wearing, all purpose Square Edge 9mm plate with anti-microbial properties
– 10AX rated
– 1G 1-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Knightsbridge Curved Edge 10AX 1G 1-Way Switch CU1000
Gently contoured 7mm plate with rounded edges and anti-microbial properties
– 10AX rated
– 1G 1-way
– Includes screw cap covers
– Certified to EN 60669-1
– Supplied in Knightsbridge rip top polybag with euro slot
Best sellers...
