Accessories
Hochiki YBN-R/3WHT Hochiki-YBN-R/3WHT
Model YBN-R/3 is a Common Mounting Base, which is fully compatible with Hochiki’s ESP range of sensors.
It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.
Hochiki TCH-B200 Hochiki-TCH-B200
Model TCH-B200 is a hand held address programmer designed to address the ESP range of Sensors and all other addressable devices such as wall sounders, mini-modules and manual call points (with the use of a programming lead – sold separately). The unit is designed to be light, robust and easy to use and operates from a single PP3 size battery, which gives the capacity for up to 8000 operations. The programmer is also capable of displaying the sensor analogue values.
Hochiki CHQ-DSC2SCI Hochiki-CHQ-DSC2SCI
Model CHQ-DSC2(SCI) is a Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.
The unit utilises simple DIL switches for reliable addressing. A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQ-DSC2(SCI), increases the IP rating to IP65.
Hochiki CHQ Hochiki-CHQ
The CHQ-BACKBOX is designed for installations where the CHQ Range of Modules – CHQ-DIM(SCI), CHQ-SZM(SCI), CHQ-DZM(SCI), CHQ-DSC(SCI), CHQ-MRC(SCI), CHQ-DRC(SCI) and CHQ-PCM – require mounting within a glanded enclosure.
The unit features ten knock-outs suitable for cable glands (not supplied) and accepts the CHQ Modules directly as a lid
Fike 802-0006 Twinflex I/O Unit Fike-802-0006-Twinflex-I/O-Unit
The Twinflex I/O module is a Relay interfacing module with monitored input to provide shutdown and monitoring facilities from the Twinflex zone. Mounted in a standard double gang box, including two sets of 2A rated SPCO relay contacts, one monitored input and inbuilt ‘End of Line’.
Input/Output module
Mounted on a double gang back-box
Twinflex compatible
Apollo SA4700-104APO Apollo-SA4700-104APO
- EN 54-17 & EN 54-18 Certified
- Meets BS 7273-4 failsafe requirements
- Ergonomic design for ease of wiring and faster installation
- Suitable for semi flush or surface mounting
- XP95, Discovery and CoreProtocol compatible
Apollo SA4700-103APO Apollo-SA4700-103APO
- EN 54-17 & EN 54-18 Certified
- Two input channels
- Meets BS 7273-4 failsafe requirements
- Ergonomic design for ease of wiring and faster installation
- Suitable for semi flush or surface mounting
- XP95, Discovery and CoreProtocol compatible
Apollo SA4700-102APO Apollo-SA4700-102APO
- EN 54-17 & EN 54-18 Certified
- Meets BS 7273-4 failsafe requirements
- Ergonomic design for ease of wiring and faster installation
- Suitable for semi flush or surface mounting
- XP95, Discovery and CoreProtocol compatible
Apollo 55000-835APO Apollo-55000-835APO
The AlarmSense Alarm Relay Module enables devices such as visual indicators, pillow/bed alarms and radio vibrating or paging devices to be connected to the fire detection system.
This allows the system to comply with the requirements of the DDA.
Apollo 55000-760APO Apollo-55000-760APO
- EN 54-17 & EN 54-18 Certified
- Designed for use where space is limited
- Allows DIN-Rail mounting
- Priority and non-priority settings
- Pre-alarm’ status available
- XP95, Discovery compatible
Apollo 45682-800APO Apollo-45682-800APO
- Allows installation in all base types, meaning you only need to carry this one type of card alleviating the need for multiple cards when using Apollo products.
- Flexibility to create any address; includes 128th pip for CoreProtocol systems
- An additional lead-in on the address pips allows for a higher tolerance
- Simplifies and speeds up installation and commissioning
- Address remains the same, no matter how often the detectors are replaced
- Pack of 25
Apollo 45681-709APO Apollo-45681-709APO
- EN 54-23 Certified Category O VAD
- 0.5Hz Flash Rate (white)
- Synchronisation of VAD flash
- Individual & group addressing
- Unique VAD self-test
- Loop-powered
- Built-in isolator
Apollo 45681-705APO Apollo-45681-705APO
- Two-Tone EN54-3 Sounder
- Multiple Selectable Volume
- EN54-23 Category ‘O’ VAD Beacon (White-Flash)
- XP95 (works on Discovery & CoreProtocol)
- 4 Isolated Base EN54-17
Apollo 45681-510APO Apollo-45681-510APO
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detectors
- Quick and simple installation
- Provides audible signal and detection at one point
- High and low volume ranges
Apollo 45681-284APO Apollo-45681-284APO
- Detects wiring short-circuits
- High brightness LED
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
Apollo 45681-277APO Apollo-45681-277APO
- Two Apollo Tones
- EN54-3 Sounder
- Selectable Volumes 55–75dB (A), 75–91dB (A)
- XP95 (works on Discovery & CoreProtocol)
- XPert7 Addressing
- 4 Isolated Base
Apollo 45681-509APO Apollo-45681-509APO
- Sounder range between 70dB(A) and 87dB(A)
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detectors
- Quick and simple installation
Apollo 45681-278APO Apollo-45681-278APO
- Two tones
- Two volume ranges 55-75dB(A) and 75-91dB(A)
- Individual and group addressing
- Unique acoustic self-test
Apollo 45681-244APO Apollo-45681-244APO
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detectors
- Quick and simple installation
Apollo 45681-206APO Apollo-45681-206APO
- Detector locking mechanism
- One-way fit
- Easy to wire
- Contains an earth connector