Accessories
Apollo 45681-201APO Apollo-45681-201APO
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Continues to work during unauthorised removal of detectors
Advanced MXP-567 Advanced-MXP-567
The Advanced loop driver card allows the expansion of an additional loop for a MxPro 5 panel providing the panel has capacity.
The Loop Driver Card MXP-567 can be used with the Nittan
protocol.
For use with MxPro 5 analogue addressable panels
Advanced MXP-503 Advanced-MXP-503
The Ad-NeT network system allows all MxPro 5 series control
panels, remote terminals and network peripherals to be
connected together using standard fire resistant two-core cable.
It provides both the benefits of distributed intelligence and
reduced installation costs whilst catering for the smallest
two-panel network through to the largest 200-panel wide area
networked system.
The network operates as a true peer-to-peer system allowing
information from any input or output device to be passed over
the network and displayed on any MxPro 5 control panel or
remote terminal as required.
Simply adding and connecting a network card allows any MxPro
5 control panel or remote terminal to be networked. All other
nodes on the Ad-NeT system will be instantly aware of a panel
as soon as it is given a valid network node address, allowing
additional panels to be added at any time. All panels incorporate
a network analyser providing valuable diagnostic and status
information and also have the facility to prevent the transmission
of fires or faults during commissioning.
For more complex systems, the Windows-based PC-NeT Mx
configuration software allows sector based programming for
Mute, Silence, Resound and Reset control keys as well as
investigation delays, group disablement and test instructions. All
panels within the same sector will share common controls and
each panel or remote terminal can also be programmed to show
specific network information on a zonal basis. For cause and
effect, any input device can be programmed to operate any
output device on any pane
Advanced MXP-502 Advanced-MXP-502
The Loop Driver Card is designed for use with the MxPro 5 range of analogue addressable panels. It provides control and connection to detector loops.
The Loop Driver Card Mxp-502 can be used with Apollo, Hochiki
or Argus Vega protocols
Advanced MXM-503 Advanced-MXM-503
All bezels are provided complete with fitting kit for a quick and
easy solution for semi-recessing the MxPro 5 series control
panels.
Please note: when recessing, extra clearance (5mm all sides)
must be factored to allow the bezel to be fitted to the backbox.
MXM-503 Semi-Flushing Bezel – Mx-5000 large enclosure
475mm(H) x 450mm (W) 30mm 105mm
Advanced MXM-502 Advanced-MXM-502
All bezels are provided complete with fitting kit for a quick and
easy solution for semi-recessing the MxPro 5 series control
panels.
Please note: when recessing, extra clearance (5mm all sides)
must be factored to allow the bezel to be fitted to the backbox.
Mxm-502 Semi-Flushing Bezel – Mx-5000 medium enclosure
345mm (H) x 430mm (W) 30mm 105mm
Advanced MXM-501 Advanced-MXM-501
All bezels are provided complete with fitting kit for a quick and
easy solution for semi-recessing the MxPro 5 series control
panels.
Please note: when recessing, extra clearance (5mm all sides)
must be factored to allow the bezel to be fitted to the backbox.
Mxm-501 Semi-Flushing Bezel – Mx-5000 small enclosure
345mm (H) x 345mm (W) 30mm 70mm
12V 7Ah Sealed Lead Acid Battery
- General purpose VRLA battery
- Lead Calcium Grids for superior life
- Absorbed Glass Mat construction with no free acid
- Gas recombination
- Good recovery from deep discharge
- Operation in any orientation (excluding continuous inverted use)
- Dimensions WxHxL: 65 x 97.5 x 151mm
- Weight: 2.2kg
Ventcroft VCA-S8DR Fire Accy Back Box 8mm Saddle Red (50x)
Ventcroft VCA-S8DR Fire Accy Back Box 8mm Saddle Red (50x)
Ideal for use with NoBurn fire cable and most other fire cable brands.
The Cable Clips are manufactured by Dip Coated technique which ensures a softer edge so as not to cut or damage the fire cable.
Ventcroft VCA-C7SR Fire Accy Back Box 7mm P Clip Red (50x)
Ventcroft VCA-C7SR Fire Accy Back Box 7mm P Clip Red (50x)
ideal for use with NoBurn fire cable and most other fire cable brands.
The Cable Clips are manufactured by Dip Coated technique which ensures a softer edge so as not to cut or damage the fire cable.
Ventcroft No Burn Platinum Enhanced Performance Red 2 Core & Earth VNP-215ERH-100m
- Fastest Enhanced Fire Cable to Prepare for Termination
- Easy to Install and Superb Working Flexibility
- Up to 12 Twists per metre for Data Protection
- Full Size CPC (Earth Core)
- 1.0mm²,1.5mm² & 2.5mm² Conductors
- Copper / Co-polymer Foil Screen
- Low Smoke & Zero Halogen
- Voltage Rating 300v/500v
Ventcroft 2 Core 1.5mm 100m Red Fire Cable VFP-215ERH-100m
- Fastest Standard Fire Cable to Prepare for Termination
- Easy to Install and Superb Working Flexibility
- Up to 12 Twists per metre for Data Protection
- 1mm²,1.5mm², 2.5mm² & 4.0mm² Conductors
- Aluminium / Co-polymer Foil Screen
- Low Smoke & Zero Halogen
- Voltage Rating 300v/500v
- Suitable for Zone 1 and Zone 2 hazardous area use
Aico RadioLink Alarm Base Ei168RC
- Mains powered base with rechargeable lithium cell back-up
- Add this to the 140e series alarms for RadioLINK wireless interconnection
- Compatible with other Aico wireless interconnection products
- Eliminates tricky wiring runs
- Saves time, mess and money
- Makes it easier to add in new alarms and accessories
HiSpec 10W Photo Sensor Lamp HSLAMP/4K/PC
- E27
- Cool White 4000K
- 800 Lumens
- Beam Angle 120 Degree
- 2 Year Guarantee
ESP Fire Safety Log Book MAGLB
- Ensure system records are maintained in accordance with BS5839-1
- Contains test procedures, frequencies of service & maintenance requirements
- Clear data tables for evidence of system services, tests and inspections
- A4
ESP EN54-4 5A PSU BPS5EN
- Certified to EN54-4
- 27.6V DC Output @ 5A
- LED Indication for Mains Status, Output Fault, Battery Fault, Charger fault
ESP EN54-4 2A PSU BPS2EN
- Certified to EN54-4
- 27.6V DC Output @ 2A
- LED Indication for Mains Status, Output Fault, Battery Fault, Charger fault
ESP Battery Expansion Box for MAGPRO96G MAGPRO96GBB
- Certified according to EN 54-4
- Supports 2x 12V/18Ah
ESP 50m Beam Detector expandable up to 120m BD1
- Up to 50m range
- Expandable to 120m with the BD1LRK
- Integral laser alignment
- Auto Align automatic beam alignment
- 24v DC 35mA max current draw
- EN 54-12 approved