Lighting Accessories

A profile is an aluminium channel that holds LED tape and hides the individual LEDs behind a diffuser, giving a neater line of light. Beyond the shallow 156.812UK and the plaster-in 156.945UK internal corner, LYYT profiles include crown, T insert, raised bar, D, box and 90° arc sections and bendable and IP68 waterproof versions, and clips such as the 156.881UK fix them in place.

With a solderless or snap-fit connector matched to the tape. LYYT makes them for 8mm, 10mm and 12mm tape in single colour, RGB, RGBW and COB versions, as straight joins, L pieces, T pieces and X pieces, and flexible links such as the 156.147UK bridge a gap or a corner on a 150mm wire.

Yes, a bezel or eyelid changes the front of a Knightsbridge BT9, BT14 or BT20 bulkhead without replacing the fitting. Bezels such as the BT9MBR (matt brass, 256mm) and BT20SLV (matt silver, 380mm) change the trim colour, and push-fit eyelids such as the BT9EG project 69mm to shade the light, which suits walkways and entrances.

The magnetic FRNFBEZ bezels fit FireNova downlights and the RE6BZ bezels fit RenuLED fixed and tilt downlights, both 88mm in diameter. The FireNova bezels include antique brass, brushed chrome, matt black, polished brass and polished chrome, and the RenuLED ones brass, brushed chrome, matt black, polished chrome and white. The FRNIC bracket makes a FireNova downlight insulation coverable.

A fire hood covers a recessed light from above so the ceiling keeps its fire resistance where the hole has been cut. The Knightsbridge FR150, FR600 and FR1200 are made of intumescent material and rated for 60 minutes; the FR600 suits MRB, MRD and MRE modular luminaires, and the FR150 suits plasterboard, concrete and suspended ceilings. None is acoustically rated.

A driver whose output matches the voltage of the tape, rated above its load: the Knightsbridge 12DCIP40 is a 12V, 40W constant voltage driver, and the 24DCIP100A a 24V, 100W DC driver, both IP67 with overheat and overload protection. Add up the watts per metre of the run and leave a margin. LEDs that need a set current take a constant current driver such as the 350mA 1W210DA.

Yes, with a lamp socket converter: the LYYT 401.091UK converts B22 to GU10, and others convert E27 to GU10 (401.092UK), E27 to B22 (401.087UK), E27 to G9 (401.098UK) and E14 to E27 (401.095UK). Each is rated 60W, and the converter adds length, so check that the lamp still fits the shade or fitting.

LYYT rope light parts include 1.5m power cables (153.562UK and 153.624UK), the 153.553UK coupler with heat-shrink sleeving, the 153.604UK end cap and 153.630UK mounting clips in packs of 25. The 153.564UK controller is for 3-wire rope light, gives 8 settings in an IP44 housing and powers up to 50m of rope.

A pre-wired pendant for an E27 lamp, ready to hang from a ceiling rose. The LYYT 429.501UK, 429.502UK and 429.503UK are vintage single sets on 1.8m braided cable in antique brass, antique gold and antique copper, and the 429.541UK and 429.543UK hang four E27 holders on 1.8m cables wired to one ceiling rose.

With a clamp hook: the QTX 151.437UK, 151.440UK and 151.443UK are rated for 25kg, and the G-shaped 151.449UK and 151.452UK for 20kg. The 151.437UK fits poles of 37-50mm diameter and the 151.449UK poles up to 55mm, so match the hook to the bar and add a safety bond to every fixture.