Lighting Cable & Connectors

Because a stripped conductor simply pushes into its own terminal, the joint is quick to make and needs no later tightening. The Knightsbridge VELOX SN3P (3-pin) and SN4P (4-pin) are maintenance-free push-fit connectors rated 20A for 1.5mm² to 2.5mm² cable, with a clear cover to inspect the conductors and space for loop-in loop-out wiring.

Yes, with a solderless connector matched to the tape. LYYT snap-fit L, T and X connectors join its own tape ranges, such as the 156.137UK for 8mm single colour DIY kits and the 156.146UK for 12mm professional RGB tape. With the LYYT flexible links, any silicone or waterproof coating is pared back from the pads before the snap connector goes on.

One made for COB strip of the same width and colour type. The LYYT 156.649UK and 156.653UK join two lengths of 10mm single colour COB strip and the 156.650UK and 156.654UK 10mm RGB COB strip, each in a pack of 5: insert the strip, align the copper contacts and crimp down. The transparent body keeps the run looking seamless.

Use a flexible link or an angle connector. The LYYT 156.147UK, 156.148UK and 156.150UK flexible links have 150mm of wire with a snap connector at each end, and the 156.154UK links RGBW tape with 135mm of wire. For COB strip, the 156.657UK (RGB) and 156.658UK (single colour) flexible links do the same job.

The LYYT 153.903UK adds 3m and the 153.905UK 5m to a run of 10mm or 12mm RGB tape, through 4-pin connectors. Each lead carries up to 2A; for runs drawing more, LYYT names its 153.771UK RGB amplifier to add power along the run.

Yes, with the extension cable made for that range. The LYYT 155.453UK suits the Connectable Rubber string, icicle, net and curtain lights, the 155.488UK the heavy duty static string lights, and the 155.490UK the heavy duty string lights with controller. The 155.453UK, 155.488UK and 155.490UK are each 5m IP44 rubber cables; check the listed SKUs match your lights.

With a splitter. The LYYT 155.491UK is a 2-way splitter for the connectable static string light ranges, and the 155.492UK a 5-way splitter for the heavy duty outdoor static string lights (2 wire). The 155.491UK and 155.492UK are both weatherproof rubber and IP44 rated, so they can sit outdoors with the lights they feed.

With Knightsbridge link power cords: the UC250 is 250mm, the UC500 500mm and the UC1000 1000mm, each a white 230V cord for linking LED under cabinet fittings. The UCP200 is the 2m 3 core flex mains power feed that brings the supply to the first fitting.

By sealing the cut ends. The LYYT 156.165UK provides end caps and silicone seals for 4x8mm side bend LED tape, and LYYT advises using a combination of these items to seal the tape so it keeps its IP66 rating after it has been cut to length or joined.

The LYYT 153.624UK rope light power cable. It is 1.5m long, with a mains plug at one end and a 2-pin connector at the other that fits the rice bulb rope light, so the rope light can be run from an ordinary socket.