Disabled Refuge & Toilet Alarms
A disabled toilet alarm lets a person in an accessible WC pull a cord to call for help, with a light and sounder outside the door showing where the call is. This collection has toilet alarm kits such as the Beacon UDTAKIT and C-TEC NC951, replacement modules and pull cords, Beacon assist call systems, and disabled refuge and fire telephone equipment for emergency voice communication systems.
Beacon UDTASPC Disabled Toilet Alarm Replacement Pull Cord
£ 6 892 Years WarrantyFast delivery Tomorrow, 20 NovHoyles A600PKIT pool alarm kit
£ 397 11Hoyles A600P pool alarm controller
£ 176 79Intercall U1440 push wander lead
£ 39 99Disabled Refuge Outstation, Type B, Hands-Free, Surface Mount, Painted Green, EVC302GS
Stylish Design£ 195 67RRP: £210.22Fast delivery Tomorrow, 20 NovHoyles A600LKITMD toilet alarm kit
£ 391 30- £ 22 71
C-TEC NC805D tail call lead, Red
£ 20 26C-TEC QT412RXCA transmitter, Red
£ 104 56- £ 23 24
Choosing Disabled Refuge & Toilet Alarms
Decide first whether you are equipping an accessible toilet or a refuge area: a toilet alarm signals for help, while a refuge system gives two-way speech with staff.
Toilet alarm kits
The Beacon UDTAKIT is a three-part kit of indication, pull cord and reset modules with battery backup that meets Part M and BS8300; it comes in white, grey (UDTAKITG) and stainless steel (UDTAKITSS). The C-TEC NC951 is a single-zone 12 V kit whose pull cord unit mounts on the ceiling or wall, with a Call Accept function for staff, and the NC951/SS is a brushed stainless steel kit. For wireless installation, the Cranford Controls 402-003 and Hoyles A600WKITB run on batteries.
Replacement modules and cords
Beacon UDTA modules are sold separately too, such as the UDTALBM light and buzzer module, the UDTAPCM pull cord module with a red 3m cord and anti-ligature mechanism, and the UDTAREM reset module. The UDTASPC replacement pull cord comes with a red cord, two handles and a magnetic coupler. For C-TEC ceiling pull units, the C-TEC NCP-12 and Signet NCP-13 are 3m anti-bacterial, wipe-clean cords.
Refuge and fire telephone systems
Beacon Type B refuge outstations such as the BTB are hands-free with full duplex speech, and Type A fire telephones such as the BTAS use a handset. The B1M4 and B1M8 master stations are compliant to BS5839-9:2021 with a 1.5A EN54-4:A2 PSU, the BMNET adds a 4.3" touchscreen, and the C-TEC SigTEL ECU-8 is an 8-line master controller that expands to 16 lines.
| Need | Examples |
|---|---|
| Accessible toilet alarm kit | Beacon UDTAKIT, C-TEC NC951 |
| Wireless toilet alarm | Cranford Controls 402-003, Hoyles A600WKITB |
| Assist call for WCs and bedrooms | Beacon B1AKIT, BABEDKIT |
| Refuge outstation, hands-free | Beacon BTB, BTB66 |
| Fire telephone, handset | Beacon BTAS, BTA66 |
| Master station | Beacon B1M8, C-TEC ECU-8 |
Brands we stock in Disabled Refuge & Toilet Alarms
Bell System, C-TEC, Cranford Controls, ESP, Hoyles, Intercall and Signet.
ESP makes most of the range, through its Beacon toilet alarm, assist call and refuge systems.
Related categories
For fire detection see fire safety equipment and fire alarm systems; for ceiling pulls used elsewhere, pull cord switches. Where the same doors are controlled, see smart access control.
Frequently asked questions
How does a disabled toilet alarm system work?
A disabled toilet alarm system lets someone in an accessible toilet pull a cord to call for help. The pull sets off a light and buzzer outside the door so staff can find the call, and a reset button inside the room cancels it once help arrives. Some systems can also report to a remote panel. The range here includes wired and wireless toilet alarm kits.
What is a ceiling pull cord alarm?
A ceiling pull cord alarm is a ceiling-mounted call switch with a long cord, usually red, that raises an emergency call when pulled. It is typically fitted in accessible toilets, bathrooms and care rooms, where a person who has fallen can still reach the cord from the floor. The range here includes ceiling pull cord units and replacement cords.
What are the regulations for a disabled toilet alarm pull cord?
In England, Approved Document M and BS 8300 guide how a disabled toilet alarm pull cord should be fitted. The cord should be red and carry two bangles, one at a height a seated person can reach and one just above the floor for someone who has fallen. It should never be tied up or cut short. The range here includes replacement red cords with two bangles.
How do you reset a disabled toilet alarm?
You reset a disabled toilet alarm by pressing the reset button, which is usually on a plate inside the toilet near the door. This is deliberate, because someone has to enter the room and check on the person before the call can be cancelled. Some kits also let staff accept a call first. The range here includes reset modules and complete kits.
Why buy from West Midlands Electrics
- Established 1975
- Birmingham trade counter
- UK-only supply
Updated