Surge Protection Devices (SPD)
Surge protection devices (SPD) guard CCTV, network and PoE equipment against voltage surges and transients on its cables. The page holds rack-mounted and single-channel Nitek protectors for video, coax and network lines, AMG Systems in-line and DIN-rail PoE protectors, an Axis Communications outdoor protector and surge protection module, and models from ACT Meters, Comnet, Dahua Technology and TRENDnet.
Nitek IPPWR-R replacement module
£ 49 18Nitek IPPWR-16M IP surge protector
£ 590 41Nitek 110POEWPS IP surge protector
£ 150 88- £ 47 64
- £ 33 77
Nitek IPPTR12 surge protector module
£ 259 99
Choosing Surge Protection Devices (SPD)
Match the protector to the cable it sits on, then check the PoE power and data rate it has to pass and where it will be mounted.
PoE power and data rate
The AMG Systems AMG110M supports Ethernet speeds of 10/100/1000Mb and PoE pass-through up to 65W. The single channel AMG110M-1X-SP and the dual channel AMG110-2X-SP have RJ45 ports that support 1/2.5/5/10Gb speeds, and support 15W, 30W, 60W, 90W and 95W PoE. The Comnet CLESP is IEEE 802.3af and 802.3at compliant for PoE and PoE Plus.
Weatherproof units
The Axis Communications 5801-641, the AXIS T8061, is enclosed in a weatherproof metal casing with an IP66 rating and is easy to mount on a wall or pole. The TRENDnet TI-OS300 has an IP67-rated metal enclosure and Ethernet cable glands. The Nitek 110POEWPS is a weatherproof CAT6 rated 110 punchdown surge protector that passes PoE+ power.
Rack-mounted protection
The Nitek IPPTR12 provides 12 channels of surge protection for network devices and fits a standard 19 inch rack. The Nitek IPPWR-16M is a 16-channel, rack mount surge protector for 10/100/1000 network devices, on which a channel is replaceable with IPPWR-R and/or IPCOAX-R replacement cards.
Camera video and coax
The Nitek CAMPDD24 is a camera video, PTZ and 12/24 volt power surge protector with a 2.8V clamping voltage. The Nitek IPCOAX-1 is an in-line, IP over coax network surge protector with female BNC connectors at the input and output and a separate input for 12 or 24V power.
Earthing
The AMG Systems AMG110-2X-SP must be correctly grounded, so that a surge or transient voltage has an unobstructed path to ground. The Comnet CLESP has an integral grounding tab, which must be securely connected to the frame ground of the installation.
Alarm power
The ACT Meters ACT1313PLUS clamps the 12VDC supply against spikes to the control panel, alarm detectors and plug-on communicators.
| Model | Type | Housing |
|---|---|---|
| AMG Systems AMG110M | PoE surge protector | In-line RJ45 housing |
| AMG Systems AMG110-2X-SP | Dual channel PoE surge protector | DIN rail or wall mount |
| TRENDnet TI-OS300 | Outdoor PoE++ Ethernet surge protector | IP67-rated metal enclosure |
| Axis Communications 5801-641 | Ethernet surge protector | IP66 weatherproof metal casing |
| Nitek IPPTR12 | 12 channel surge protector | Standard 19 inch rack |
Related categories
See PoE switches in PoE switches, PoE injectors in PoE injectors and splitters, and outdoor network cable in network and data cable.
Brands we stock in Surge Protection Devices (SPD)
ACT Meters, AMG Systems, Axis Communications, Comnet, Dahua Technology, Nitek and TRENDnet.
Frequently asked questions
Why use a surge protector with Ethernet protection?
Surges can reach equipment through data cables as well as the mains, so Ethernet protection guards switches, recorders and cameras that a mains protector would miss. Long outdoor cable runs can pick up induced voltage from nearby lightning, and PoE cameras on poles or walls are exposed. A protector on the network line clamps the spike and sends it to earth.
Where should an Ethernet cable surge protector be fitted?
Fit it where the cable enters the building, or close to the equipment it protects, such as a camera on a pole or a switch in a rack. On a long outdoor run, installers often protect the camera end and the switch end. Connect its earth terminal to a sound earth with a short, direct conductor. The range here includes DIN-rail and pole-mountable units.
What is an Ethernet surge protector?
An Ethernet surge protector is an in-line device that sits on a network cable and diverts voltage spikes to earth before they reach the connected equipment. It usually has an RJ45 input and output and passes data and PoE power straight through. Check that it supports the network speed and PoE power your device needs.
Why buy from West Midlands Electrics
- Established 1975
- Birmingham trade counter
- UK-only supply
Updated