Detector Brackets & Enclosures
Detector brackets and enclosures fit alarm detectors and their wiring in place. Brackets set a detector's angle on a wall or ceiling, pole and floor brackets hold beams, and tamper junction boxes and lockable enclosures house connections, keypads and third-party devices. Brands include Ajax, with enclosures, front panels and sockets, Optex, Honeywell, Elmdene, DMP and Knight Fire & Security.
Vanderbilt GMXP0 Mounting Plate for Seismic Detectors VBPZ:2772730001
£ 32 21RRP: £38.65Optex RFB-ENCB cabinet/enclosure
£ 148 79DMP 698-7800-W keypad backplate
£ 12 17- £ 62 04
DMP 696-W keypad conduit backbox
£ 19 89- £ 7 82
- £ 119 07
Choosing Detector Brackets & Enclosures
Choose by what has to be held: a detector, a beam or laser, or wiring and devices behind a tamper-protected lid.
Ceiling and wall brackets
The Pyronix FP01210 is a ceiling bracket for MEQ detectors, for applications where wall mounting is not suitable. On walls, the Pyronix XD-WALLBRACKET gives 45° left and right adjustment plus up and down movement for XD detectors, and the GJD149/W swivel bracket adds pan and tilt to Pearl detectors.
Beam and laser mounting
The Takex BP-60A is a pair of pole mounting brackets for TK/TE Twin active infrared beams, and the Optex RLS-PB2 is a pole mount bracket for the REDSCAN mini-Pro series. The GJD511 is required when fitting a D-TECT Laser to a structure or post. For towers, the Optex STWM202RR is a single sided two metre, 180° wall mount tower that takes two beams per side with a heater.
Junction boxes with a tamper
The Knight J310 is a 10-way conduit junction box with two wiring points reserved for the lid tamper, a sealing gasket on the lid and Environmental Class III. The Knight J80B has a leaf spring tamper and a very low profile of about 2cm, and the Knight J10 is a Grade 3 junction box with a TACT spring micro switch tamper.
Enclosures and keypad boxes
The Elmdene UNIVERSALENCL and UNIVERSAL-ENC-M are tampered enclosures with a universal backplate for housing third-party devices, with front and rear tamper protection. The Elmdene ELM-KEYPAD-BOX is a lockable steel enclosure for an alarm system keypad.
Shields, masks and cages
The Optex SIP-MIDIHOOD is a sun and snow shield for the SIP-5030 and SIP-101 detectors, and the Optex MKP-01 masking plates adjust the detection area of WXI/WXS Series sensors to help reduce false alarms. The STI-9621 is a 9-gauge steel wire cage that protects a wall-mounted motion detector against vandalism and damage.
| Model | Type | For | Detail |
|---|---|---|---|
| FP01210 | Ceiling bracket | Pyronix MEQ detectors | Where wall mounting is not suitable |
| XD-WALLBRACKET | Wall bracket | Pyronix XD detectors | 45° left and right, up and down |
| BP-60A | Pole brackets, pair | TK/TE Twin beams | Pole mounting |
| J310 | Conduit junction box | Wiring | Lid tamper, Environmental Class III |
| ELM-KEYPAD-BOX | Lockable enclosure | Alarm keypad | Key number 606 |
Related categories
See motion sensors and PIRs, photoelectric beam detectors and alarm system accessories. See also Shock & Glass Break Detectors.
Brands we stock in Detector Brackets & Enclosures
Acre, Ajax, Aritech, Bosch, CQR, Dahua Technology, DMP, Elmdene, GJD, Hikvision, Honeywell Commercial Security, Knight Fire & Security, Magosys Systems, Optex, Protect, Pyronix, Safety Technology International, Scope, Takex, Texecom, Videofied, Videx, Vimpex and Voltek.
Frequently asked questions
What is a motion detector bracket?
A motion detector bracket holds a PIR or dual-technology sensor on a wall or ceiling so the installer can aim it at the area it must cover. Swivel types usually let the detector turn left and right and tilt up and down. Check that the bracket suits your detector, as many fit one maker's housing. The range here includes swivel wall brackets and ceiling brackets for intruder alarm detectors.
Why buy from West Midlands Electrics
- Established 1975
- Birmingham trade counter
- UK-only supply
Updated