Smoke Alarm Accessories

Fit an input module or an input relay base, which lets a third-party device trigger the alarm function of the connected alarms. The Espire ES1MODRF 10 year input module and the mains powered ES1MODV input relay base both enable 3rd party devices to trigger the alarm function of Espire alarms. To switch other equipment when an alarm activates, the ES1RB relay base is used instead.

You can add relay bases, remote control switches, RF modules and mounting panels. The Espire ES1RB relay base switches third-party devices when an alarm activates, and the mains powered ES1REMV has switches for testing the alarms, hush and locate. For Aico 3000 Series alarms, the Ei3000MRF SmartLINK module adds wireless interconnection. The Ajax 9548.10.BL is a replacement mounting panel for FireProtect detectors.

An Aico SmartLINK module is made for Aico 3000 Series alarms, adding wireless interconnection to them. The Aico Ei3000MRF works exclusively with the 3000 Series and is powered directly from the alarm head, so it needs no batteries. The Ei3000MRF links up to 12 RF devices over a proprietary 868MHz mesh, with a range of about 30m in standard residential buildings.

An Aico gateway reports alarm activity from connected RF alarms, such as fire, carbon monoxide detection or mains failure, to an online portal over the GSM network. The Aico Ei1000G monitors up to 12 RF devices, connects with its own roaming SIM card and works with SmartLINK and RadioLINK+ alarms, but not with original RadioLINK systems.

Use a SmartBracket mounting panel made for your FireProtect detector variant and colour, and confirm the exact variant before ordering. The Ajax 9548.10.BL is a black mounting panel for FireProtect, FireProtect Plus and FireProtect 2 variants that lets a detector be installed and aligned without opening its housing. The white 9549.10.WH gives WAGO terminal access so an AC FireProtect can be wired while mounted.