Lighting Accessories

A profile is an aluminium channel that holds LED tape and hides the individual LEDs behind a diffuser, giving a neater line of light. Beyond the shallow 156.812UK and the plaster-in 156.945UK internal corner, LYYT profiles include crown, T insert, raised bar, D, box and 90° arc sections and bendable and IP68 waterproof versions, and clips such as the 156.881UK fix them in place.

A solderless or snap-fit connector made for the tape's width and type joins strips without soldering. LYYT makes them for 8mm, 10mm and 12mm tape in single colour, RGB, RGBW and COB versions, as straight joins, L pieces, T pieces and X pieces, and flexible links such as the 156.147UK bridge a gap or a corner on a 150mm wire.

Yes, a bezel or eyelid made for the bulkhead changes its trim or shades its light without replacing the fitting. Bezels such as the Knightsbridge BT9MBR (matt brass, 256mm) and BT20SLV (matt silver, 380mm) change the trim colour. The push-fit BT9EG eyelid projects 69mm and focuses the light where it is needed, which suits walkways and entrance areas.

A downlight bezel is made for one downlight range, so choose the bezel named for that range and its fixed or tilt version. The magnetic FRNFBEZ bezels fit FireNova downlights and the RE6BZ bezels fit RenuLED fixed and tilt downlights, both 88mm in diameter. The FRNIC bracket makes a FireNova downlight insulation coverable.

A fire hood covers a recessed light from above so the ceiling keeps its fire resistance where the hole has been cut. The Knightsbridge FR150, FR600 and FR1200 are made of intumescent material and rated for 60 minutes; the FR600 suits MRB, MRD and MRE modular luminaires, and the FR150 suits plasterboard, concrete and suspended ceilings. None is acoustically rated.

A constant voltage driver at the same voltage as the flex, with a wattage rating that covers the load of the run. The Knightsbridge 12DCIP40 is a 12V, 40W constant voltage driver, and the 24DCIP100A a 24V, 100W DC driver, both IP67 with overheat and overload protection. LEDs that need a set current take a constant current driver such as the 350mA 1W210DA.

Yes, a B22 to GU10 lamp socket converter turns a bayonet cap lampholder into a GU10 fitting. The LYYT 401.091UK does this with a ceramic socket, and other converters change E27 to GU10 (401.092UK), E27 to B22 (401.087UK), E27 to G9 (401.098UK) and E14 to E27 (401.095UK). They are rated for a 60W maximum load.

A rope light controller runs rope light through lighting effects such as chases, flashes and steady light, whereas a plain power cable gives static light. The LYYT 153.564UK is for 3-wire rope light, gives 8 settings in an IP44 housing and can power up to 50m of rope. For static light, the 1.5m 153.562UK power cable can power up to 100m of rope light, and parts include the 153.553UK coupler, the 153.604UK end cap and 153.630UK mounting clips.

A pre-wired pendant for an E27 lamp, ready to hang from a ceiling rose. The LYYT 429.501UK, 429.502UK and 429.503UK are vintage single sets on 1.8m braided cable in antique brass, antique gold and antique copper, and the 429.541UK and 429.543UK hang four E27 holders on 1.8m cables wired to one ceiling rose.

With a clamp hook that fits the bar's diameter and is rated for the fixture's weight. The QTX 151.437UK, 151.440UK and 151.443UK are rated for 25kg, and the G-shaped 151.449UK and 151.452UK for 20kg. The 151.437UK fits poles of 37-50mm diameter and the 151.449UK poles up to 55mm.