Ajax 106791.136.WH1 Wireless CO Detector, 10-Year Sealed Battery, 85 dB Siren

Free Delivery
£ 132 78
(Incl. VAT)

About this product

The Ajax FireProtect 2 SB (CO) Jeweller, article code 106791.136.WH1, is a wireless carbon monoxide detector with sealed batteries, in white. It is for Ajax security systems, using a chemical CO sensor and an 85 dB siren to warn of dangerous carbon monoxide levels, and reports to the hub over Jeweller wireless technology.

Key features

  • Chemical CO sensor with a 10-year sensor life
  • Alarms at more than 50 ppm (0.005%) in no more than 90 minutes, more than 100 ppm (0.01%) in no more than 40 minutes and more than 300 ppm (0.03%) in no more than 3 minutes
  • In-built siren, 85 dB at a distance of 3 meters
  • Jeweller radio range up to 1,700 m in an open space
  • 2 non-replaceable lithium batteries with 10 years of battery life
  • Interconnected fire detector alarms, started by the hub within 20 seconds
  • Tampering alarm against detachment or removal of the mounting panel
  • Indoor installation, IP20 protection class

Frequently asked questions

How long does the battery last in the FireProtect 2 SB (CO)?

It runs on 2 non-replaceable lithium batteries with 10 years of battery life. After 10 years of operation, the detector must be replaced with a new one.

At what carbon monoxide level does it alarm?

When the accumulated dose is exceeded: more than 50 ppm (0.005%) in no more than 90 minutes, more than 100 ppm (0.01%) in no more than 40 minutes, or more than 300 ppm (0.03%) in no more than 3 minutes.

How loud is the siren?

The in-built siren has a volume of 85 dB at a distance of 3 meters.

What does the detector connect to?

It communicates with an Ajax hub (or radio signal range extender) over Jeweller, at up to 1,700 m in an open space.

Can it be installed outdoors?

No. The device is designed only for indoor installation and has an IP20 protection class.

Do linked detectors sound together?

Yes. Through primary interconnection the hub starts an interconnected alarm within 20 seconds; with fallback interconnection (firmware version 5.59.2 or later), all connected detectors activate the buzzer within a minute.

£ 132 78
Ships from United Kingdom
28 days hassle free returns
Secure payment transactions
Price
£132.78 Incl. VAT
Add a WME Product Care Plan Includes warranty, replacement and repairs backed by WME
Why add a product care plan:
  • Full breakdown support
  • Full replacement if we can't repair your product within 10 days
  • All parts, labour and callouts included if necessary
  • Extended manufacturer warranty with faster turn arounds
  • Excludes accidental & cosmetic damages
By selecting one of these plans you agree to purchase WME Care Plan. Please read the Terms and Important information to ensure WME Care Plan is right for you. Compare prices of extended warranties for electrical goods at www.compareextendedwarranties.co.uk
WME Care
Technical Details
Specifications
Brand
Ajax
Model
106791.136.WH1
Manufacturer Part Number (MPN)
106791.136.WH1
Sensitive element
chemical CO sensor
Sensor life
10 years
Alarm at more than 50 ppm (0.005%)
no more than in 90 minutes
Alarm at more than 100 ppm (0.01%)
no more than in 40 minutes
Alarm at more than 300 ppm (0.03%)
no more than in 3 minutes
In-built siren
volume 85 dB at a distance of 3 meters
Communication
Jeweller communication technology
Radio communication range
up to 1,700 m
Maximum effective radiated power (ERP)
up to 20 mW
Radio signal modulation
GFSK
Radio frequency hopping
To prevent radio interference and jamming.
Detection of communication failure
within 15 minutes
Power supply
2 non-replaceable lithium batteries
Battery life
10 years of battery life.
Dimensions
44 × 86 × 86 mm
Weight
143 g
Operating temperature range
from 0°С to +50°С
Operating humidity
up to 80%
Protection class
IP20
Colour
White

Specifications

Brand Ajax
Model 106791.136.WH1
Manufacturer Part Number (MPN) 106791.136.WH1
Sensitive element chemical CO sensor
Sensor life 10 years
Alarm at more than 50 ppm (0.005%) no more than in 90 minutes
Alarm at more than 100 ppm (0.01%) no more than in 40 minutes
Alarm at more than 300 ppm (0.03%) no more than in 3 minutes
In-built siren volume 85 dB at a distance of 3 meters
Communication Jeweller communication technology
Radio communication range up to 1,700 m
Maximum effective radiated power (ERP) up to 20 mW
Radio signal modulation GFSK
Radio frequency hopping To prevent radio interference and jamming.
Detection of communication failure within 15 minutes
Power supply 2 non-replaceable lithium batteries
Battery life 10 years of battery life.
Dimensions 44 × 86 × 86 mm
Weight 143 g
Operating temperature range from 0°С to +50°С
Operating humidity up to 80%
Protection class IP20
Colour White

Ajax 106791.136.WH1 Wireless CO Detector

Ajax 106791.136.WH1 Wireless CO Detector, 10-Year Sealed Battery, 85 dB Siren

What it does

FireProtect 2 SB (CO) Jeweller detects carbon monoxide with a chemical CO sensor and raises an alarm when the accumulated dose is exceeded: more than 50 ppm (0.005%) in no more than 90 minutes, more than 100 ppm (0.01%) in no more than 40 minutes, and more than 300 ppm (0.03%) in no more than 3 minutes.

The in-built siren sounds at 85 dB at a distance of 3 meters and stays active until the reason for triggering is eliminated or the user disables the notification. The detector stops notifying when the concentration drops to 50 ppm (0.005%) within one minute.

Where it is used

The detector is designed only for indoor installation, with an IP20 protection class, an operating temperature range from 0°C to +50°C and operating humidity up to 80%.

Installation notes

It fits on the SmartBracket mounting panel, which allows the position of the detector to be adjusted after installation. Power comes from 2 non-replaceable lithium batteries with 10 years of battery life; after 10 years of operation the detector must be replaced with a new one.

It communicates with a hub or radio signal range extender over Jeweller, at up to 1,700 m in an open space, and a communication failure is detected within 15 minutes.

Day to day

If one fire detector in the system detects a threat, the hub starts an interconnected alarm within 20 seconds and sends data to Ajax apps. On detectors with firmware version 5.59.2 or later, the initiating detector also alerts other detectors directly, so all connected detectors activate the buzzer within a minute even if connection with the hub is lost.

A green LED lights once every 56 seconds as a power indication, meeting EN 50291, and a yellow LED shows malfunctions. Pressing the front button runs a detector test, or silences the sound notification during an alarm.

Remote configuration and instant notifications run through the Ajax apps.

Ajax 106791.136.WH1 Wireless CO Detector
Ajax

Ajax 106791.136.WH1 Wireless CO Detector, 10-Year Sealed Battery, 85 dB Siren

£132.78

The Ajax FireProtect 2 SB (CO) Jeweller, article code 106791.136.WH1, is a wireless carbon monoxide detector with sealed batteries, in white. It is for Ajax security systems, using a chemical CO sensor and an 85 dB siren to warn of dangerous carbon monoxide levels, and reports to the hub over Jeweller wireless technology.

Key features

Frequently asked questions

How long does the battery last in the FireProtect 2 SB (CO)?

It runs on 2 non-replaceable lithium batteries with 10 years of battery life. After 10 years of operation, the detector must be replaced with a new one.

At what carbon monoxide level does it alarm?

When the accumulated dose is exceeded: more than 50 ppm (0.005%) in no more than 90 minutes, more than 100 ppm (0.01%) in no more than 40 minutes, or more than 300 ppm (0.03%) in no more than 3 minutes.

How loud is the siren?

The in-built siren has a volume of 85 dB at a distance of 3 meters.

What does the detector connect to?

It communicates with an Ajax hub (or radio signal range extender) over Jeweller, at up to 1,700 m in an open space.

Can it be installed outdoors?

No. The device is designed only for indoor installation and has an IP20 protection class.

Do linked detectors sound together?

Yes. Through primary interconnection the hub starts an interconnected alarm within 20 seconds; with fallback interconnection (firmware version 5.59.2 or later), all connected detectors activate the buzzer within a minute.

View product