Popular right now
Lots of people have looked at this recently

Selling fast!
Grab yours while you can

Fike Twinflex Manual Call Point, Resettable, with Cover 402-0006

Visit Fike Products
£ 26 23
(Incl. VAT) RRP: £31.48
Save £5.25

About this product

The Fike 402-0006 is a Twinflex manual call point for raising a fire alarm by hand on Twinflex control panels. It suits installers and maintainers of Twinflex systems. It latches into the alarm position until reset with a special key, it can be flush fitted if required, and a call point cover is included.

Key features

  • Stays in alarm until someone resets it – once operated it latches into the alarm position and needs a special key
  • Flush fitting without extra parts – each MCP comes supplied with a flush fitting adaptor
  • Shows its status at a glance – a single colour red LED indicates activation at a 0.5 Second Interval and End Of Line at a 5 Second Interval
  • Set up at the back – End Of Line is set with a DIL switch, a small on/off switch on the rear
  • Shares a zone with other Twinflex devices – it may be installed on the same zone as the Multipoint detector/sounder
  • Extra protection supplied – a call point cover is included

For installers

  • Power: 20 to 35V DC. Zone Current @ 24VDC: Quiescent 50uA, Active 16mA.
  • Mounting: standard UK single gang deep (47mm min) back box. Size 88mm x 88mm, depth 52mm standard inc base or 25mm flush mounted.
  • Cabling: RED (R) (+) and BLUE (B) (-) Zone In / Out, with E for Zone Screen In / Out.
  • Compatibility: Twinflex V1 onwards and TwinflexPro V1 onwards. SLU Rating 3, DLU Rating 16.
  • Standards: Approved to EN54 Part 11.

Frequently asked questions

How is it reset after activation?

With a special key. Once operated it latches into the alarm position until it is manually reset.

Can it be flush mounted?

Yes. Each one comes with a flush fitting adaptor, and the depth is then 25mm.

What back box does it need?

A standard UK single gang deep back box, 47mm minimum.

Which fire alarm panels does it work with?

Fike's Twinflex range: Twinflex and TwinflexPro, V1 onwards. Check the panel's documentation before pairing it with anything else.

How is End Of Line set?

With the DIL switch on the rear. ON is enabled and OFF is disabled.

Is a cover included?

Yes. This version includes a call point cover.

£ 26 23
RRP: £31.48 Save £5.25
Google Top Quality Store · Rated Exceptional
Ships from United Kingdom
28 days hassle free returns
Secure payment transactions
Price
£26.23 Incl. VAT £31.48
Add a WME Product Care Plan Includes warranty, replacement and repairs backed by WME
Why add a product care plan:
  • Full breakdown support
  • Full replacement if we can't repair your product within 10 days
  • All parts, labour and callouts included if necessary
  • Extended manufacturer warranty with faster turn arounds
  • Excludes accidental & cosmetic damages
By selecting one of these plans you agree to purchase WME Care Plan. Please read the Terms and Important information to ensure WME Care Plan is right for you. Compare prices of extended warranties for electrical goods at www.compareextendedwarranties.co.uk
WME Care
Info about this product
Technical Details
Specifications
Brand
Fike
Model
402-0006
Manufacturer Part Number (MPN)
402-0006
Also listed as
402 0006
Product type
Twinflex Manual Call Point (MCP)
Style
Resettable
Colour
Red
Cover
Includes call point cover
Width x Height
88mm x 88mm
Depth, standard inc base
52mm
Depth, flush mounted
25mm
Back box
Standard UK single gang deep (47mm min)
Supplied adaptor
Flush fitting adaptor
Operating temperature
-10°C to +50°C
Voltage range
20 to 35V DC
LED indication, activated
0.5 Second Interval
LED indication, End Of Line
5 Second Interval
System compatibility
Twinflex: V1 onwards; TwinflexPro: V1 onwards
Zone Current @ 24VDC, quiescent
50uA
Zone Current @ 24VDC, active
16mA
SLU Rating
3
DLU Rating
16
Approvals
Approved to EN54 Part 11
Terminal RED (R)
(+) Zone In / Out
Terminal BLUE (B)
(-) Zone In / Out
Terminal E
Zone Screen In / Out
DIL switch, End Of Line
Enabled ON; Disabled OFF
Dimensions
Dimensions
Width x Height 88mm x 88mm; depth standard inc base 52mm; depth flush mounted 25mm
Specifications
Dimensions

Specifications

Brand Fike
Model 402-0006
Manufacturer Part Number (MPN) 402-0006
Also listed as 402 0006
Product type Twinflex Manual Call Point (MCP)
Style Resettable
Colour Red
Cover Includes call point cover
Width x Height 88mm x 88mm
Depth, standard inc base 52mm
Depth, flush mounted 25mm
Back box Standard UK single gang deep (47mm min)
Supplied adaptor Flush fitting adaptor
Operating temperature -10°C to +50°C
Voltage range 20 to 35V DC
LED indication, activated 0.5 Second Interval
LED indication, End Of Line 5 Second Interval
System compatibility Twinflex: V1 onwards; TwinflexPro: V1 onwards
Zone Current @ 24VDC, quiescent 50uA
Zone Current @ 24VDC, active 16mA
SLU Rating 3
DLU Rating 16
Approvals Approved to EN54 Part 11
Terminal RED (R) (+) Zone In / Out
Terminal BLUE (B) (-) Zone In / Out
Terminal E Zone Screen In / Out
DIL switch, End Of Line Enabled ON; Disabled OFF

Dimensions

Dimensions Width x Height 88mm x 88mm; depth standard inc base 52mm; depth flush mounted 25mm

Fike 402-0006 Twinflex manual call point, angled view

Fike Twinflex Manual Call Point, Resettable, with Cover 402-0006

What this call point does

A manual call point lets a person raise the fire alarm by hand, usually on the way out of a building.

This Fike unit is the resettable style, made for Twinflex systems. It belongs to one maker's system, so check the panel first.

How it works

  • Resettable element: a resettable call point usually has an element that moves when pressed, so there is no glass to sweep up after use.
  • Latching: after operation the unit holds its alarm state, so whoever attends can see which one was used.
  • End Of Line: end of line tells the panel where a zone finishes, so it can spot a break in the wiring. As a rule, only the last device on a zone needs it.

Where to use it

Positions come from the design for your commercial fire alarm system, and exit doors are the usual starting point.

Do not assume it suits wet or exposed positions without checking Fike's documentation for the IP rating. Check that the space stays within its temperature range.

What the figures mean in practice

  • Quiescent and active: quiescent is the current drawn while idle, and active is the current drawn in alarm. Add both to your zone calculations.
  • SLU and DLU: these are load figures used when adding up the devices on a zone. Check the total against the panel's own instructions.
  • Two depths: the depth falls from 52mm to 25mm when flush mounted, because more of the unit sits in the wall.

Installing it

  • Back box depth: a shallow box will not do here. Measure what is already in the wall before reusing it.
  • Screen: the E terminal carries the zone screen in and out, so continuity can be kept from one device to the next.
  • Set the switch early: the DIL switch is on the rear, so set it before the unit goes on the wall.

Planning your system

The call point needs a Twinflex control panel on the same zone wiring. Detection and alarm come from other Twinflex parts, such as the Multipoint devices and separate sounders.

Keep the reset key where the responsible person can reach it.

Standards explained

  • EN54 Part 11: the European standard for manual call points in fire detection and alarm systems.
  • Current approvals: if your specification needs a particular approval, confirm it is still current.
Fike 402-0006 Twinflex manual call point, angled view
Fike

Fike Twinflex Manual Call Point, Resettable, with Cover 402-0006

£26.23 £31.48

The Fike 402-0006 is a Twinflex manual call point for raising a fire alarm by hand on Twinflex control panels. It suits installers and maintainers of Twinflex systems. It latches into the alarm position until reset with a special key, it can be flush fitted if required, and a call point cover is included.

Key features

For installers

Frequently asked questions

How is it reset after activation?

With a special key. Once operated it latches into the alarm position until it is manually reset.

Can it be flush mounted?

Yes. Each one comes with a flush fitting adaptor, and the depth is then 25mm.

What back box does it need?

A standard UK single gang deep back box, 47mm minimum.

Which fire alarm panels does it work with?

Fike's Twinflex range: Twinflex and TwinflexPro, V1 onwards. Check the panel's documentation before pairing it with anything else.

How is End Of Line set?

With the DIL switch on the rear. ON is enabled and OFF is disabled.

Is a cover included?

Yes. This version includes a call point cover.

View product

  • Fast shipping

    On every UK Order

  • Special Trade Discount

    Regular sales and discounts

  • WME Guarantee

    We provide warranty

  • Full Support

    Talk to a real person