Hochiki Conventional Sounder Beacon Base, White, 93dB(A) CSBB-E(WHT)

Overview

A sounder beacon base puts a sounder and a high intensity LED flash at a CDX detector point. The design is robust and easy to install.

This is the white version, ordering code CSBB-E(WHT); the colour options are Ivory or White.

How it works

• Platform type: the detector and its compatible CDX base mount on the sounder beacon.
• DIL switches: a set of DIL switches selects the tone and the sound output: LOW, MEDIUM or HIGH.
• LED flash: advanced LED technology provides a high intensity flash.

Where to use it

The IP rating is IP42 and the operating temperature range is -20 °C to +70 °C. Check that rating suits the location before fitting.

What the figures mean in practice

• 87, 90 and 93 dB(A): the Tone 1 sound output @ 1 metre at the LOW, MEDIUM and HIGH settings.
• 440 Hz – 2900 Hz: the operating frequency range across the 32 tones.
• 18 – 30 VDC: the voltage range. Check the panel's sounder output stays inside it at the end of the cable run.

Plan sounder positions for the whole area rather than relying on the HIGH setting, because sound falls off with distance.

Installing it

Set the tone and sound output on the DIL switches during installation, and record the setting.

As a rule, use the same tone on every sounder in a building so occupants learn one alarm sound, and test each position at the volume chosen.

Planning your system

Compatible CDX bases include the Hochiki YBN-R/6 base. Compatible CDX detectors include the DCD-CE3 heat detector and the DFJ-CE3 heat detector.

To secure the unit, fit the CS/CAP lockable cap.

Browse more Hochiki sounders. Browse more of the Hochiki range.

Read the guide to commercial fire alarm systems for background on zones, devices and protocols.