Kentec Electronics K375 control panel module
About this product
Please note: this is a non-returnable item (excluding faulty goods)
Kentec Electronics K375 is a control panel module.
This simple board contains a single 24VDC relay, which can be used for any extra low voltage switching applications. It has two changeover contacts, an LED indicator to show when the coil is energised and a polarising diode to prevent damage to the power source by reverse polarity connection. The contacts are suitable for switching a maximum of 30VDC and 2A.
Voltages or currents that exceed these values should not be connected under any circumstances. The current consumption of the unit when operated from a 24V supply is approximately 25 mA. The PCB has four 4mm mounting holes, which will accept the self adhesive standoffs supplied.
The use of self adhesive standoffs should be carefully considered however due to their tendency to become detached over a period of time and a more permanent fixing method is recommended.
Key features
- 24VDC operated
- LED indicator shows relay operated
- 2-Changeover contacts per relay
- Built in suppression diodes
- Spring leaf 2.5mm capacity terminals
- Small footprint
- 2A 30VDC contact rating
- Low current consumption
If you are matching this to an existing installation, work from the K375 part number rather than the description.
Specifications
Certifications
Power description
Attributes
Specifications
| Brand Name | Kentec Electronics |
|---|---|
| Manufacturer Part Number | K375 |
Certifications
| RoHS compliance | Out of Scope |
|---|---|
| WEEE compliance | Out of Scope |
Power description
| Input Voltage | 24V DC |
|---|
Attributes
| Input Voltage | 24V DC |
|---|
Kentec Electronics K375 control panel module
