Tynetec 169MHz Ceiling Pull Cord, Anti-Ligature Safety Break ZXT435
About this product
The Tynetec ZXT435 is a 169MHz ceiling pull cord for telecare and warden call alarms. It lets someone raise an emergency call by pulling the cord once. It suits bathrooms and bedsides, and homes where wiring a standard pullcord would be difficult, and it works with Reach, Advent xt and Altec Response units.
Key features
- Raises a call with one pull – an emergency call is made by simply pulling the cord once
- No cable back to the alarm – a 169MHz device for homes where a standard pullcord would be hard to wire
- Reachable from standing or the floor – 2.7 metre orange cord with 2 triangular grips
- Designed with resident safety in mind – Anti-ligature safety break
- Tells you when the battery is going – a low battery alert is automatically transmitted
- Small and light on the ceiling – 87mm diameter x 35mm deep, 85 grams
For installers
- Power: long life Lithium battery, with no mains connection needed at the cord.
- Mounting: ceiling only, not designed for wall mounting. 2 suitable length screws, into a wooden joist if possible, otherwise cavity fixings.
- Cabling: none. Register it to the alarm unit instead, using the 8 digit ID on the label where deletion is needed.
- Compatibility: Reach at-home alarms, Advent xt warden call and Altec Response local carer alarms.
Frequently asked questions
Which alarms does this pull cord work with?
Reach at-home alarms, Advent xt warden call and Altec Response local carer alarms. It has to be registered onto the unit before use.
Where should a ceiling pull cord be fitted?
In bathrooms, alongside the bed, or anywhere personal pendants are not usually worn. It must go on a ceiling, as it is not designed for wall mounting.
How long should the cord be?
It is supplied as 2.7 metres and cut to suit. Knot it so one triangle is within normal reach and the other just above floor level.
Can the battery be changed on site?
No. Alarm pullcords must be returned to the maker for battery replacement, and should be replaced within 7 days of a low battery call.
How often should it be tested?
Once a month. Activating it checks the battery and confirms it is working.
-
Download
- ZXT435 datasheet
Specifications
Dimensions
Specifications
| Brand | Tynetec |
|---|---|
| Model | ZXT435 |
| Manufacturer Part Number (MPN) | ZXT435 |
| Product type | 169MHz Telecare Devices, Alarm Pullcord |
| Compatibility | Reach at-home alarms, Advent xt warden call and Altec Response local carer alarms |
| Switch | Ceiling mounted momentary action switch |
| Cord | 2.7 metre orange cord with 2 triangular grips |
| Safety break | Anti-ligature safety break |
| Battery | Long life Lithium battery |
| Battery warning | Low battery warning |
| Dimensions | 87mm diameter x 35mm deep |
| Weight | 85 grams |
| Fixings Required | 2 suitable length screws (1½ inch typical); plasterboard cavity fixings may be required |
| Device ID | 8 digit ID on a label on the back of the alarm pullcord |
| Maintenance | Activate once a month to check the battery and confirm operation |
Dimensions
| Dimensions | 87mm diameter x 35mm deep |
|---|
Tynetec 169MHz Ceiling Pull Cord, Anti-Ligature Safety Break ZXT435
