Notifier Addressable Manual Call Point with Isolator, Flexible Element, M700KACI-FF
About this product
The Notifier M700KACI-FF is an addressable manual call point for Notifier fire alarm control panels. It gives people in a building a way to raise the alarm by hand. It suits installers fitting or extending a loop, and comes with an in built isolator and a flexible element included.
Key features
- Faults kept apart on the loop – integral loop isolation, built into the call point
- Quicker second fix – a terminal block reduces installation time, with no re-termination at commissioning
- Each device has its own identity – analogue addressable communications, with one of 99 addresses
- Status you can see – an integral LED on the unit
- Functional testing – a specialist test key goes into the bottom of the unit
- Works alongside earlier kit – backward compatibility
For installers
- Power: 15 V to 30VDC maximum. Quiescent 360µA, alarm current 6mA.
- Mounting: semi-flush as standard, using a single gang back box with terminal tray ETT-P. Surface mounting uses back box SR1T.
- Cabling: wire the terminal block during first fix, with link P102 giving continuity for testing.
- Compatibility: for Notifier's fire alarm control panel, with backward compatibility. Check your panel model against its documentation before ordering.
- Standards: fully compliant with EN54, Part 11. Ingress protection IP24D.
Frequently asked questions
Is a back box needed for this call point?
Yes, one way or another. Semi-flush mounting takes a single gang back box and terminal tray ETT-P, and surface mounting takes back box SR1T.
Does it have a built in isolator?
Yes. It is an addressable call point with in built isolator, giving integral loop isolation.
How is the address set?
With the two rotary decade switches on the rear of the unit. It uses one of 99 possible addresses.
Can it be used outdoors?
It is for indoor use, with a rating of IP24D. Do not plan on it for outdoor positions.
Can a cover be fitted to stop accidental operation?
Yes. Hinged transparent cover PS200 protects the element, and cover seal PS056 adds a seal that must break before the unit will operate.
Is the flexible element resettable?
Do not count on it. Resettable elements are a separate part, PS230, in a pack of 10, so check with the maker before relying on a reset.
-
Download
- M700KACI-FF datasheet
Specifications
Dimensions
Specifications
| Brand | Notifier |
|---|---|
| Model | M700KACI-FF |
| Manufacturer Part Number (MPN) | M700KACI-FF |
| Product type | Addressable call point with in built isolator |
| Operating element | Flexible element included |
| Communications | Analogue addressable |
| Addresses | One of 99 possible addresses |
| Address setting | Two rotary decade switches on the rear of the unit |
| Size, semi-flush mounting | Height 93 mm, width 89 mm, depth 27.5 mm |
| Size, surface mounting | Height 93 mm, width 89 mm, depth 59.5 mm |
| Weight | Flush 110 g, surface 130 g |
| Quiescent current | 360µA |
| Alarm current | 6mA |
| Operating voltage | 15 V to 30VDC maximum |
| Operating temperature | -30°C to +70°C |
| Relative humidity | 0% to 95%, non-condensing |
| Ingress protection | IP24D |
| Standard | Fully compliant with EN54, Part 11 |
Dimensions
| Dimensions | Height 93 mm, width 89 mm, depth 27.5 mm semi-flush or 59.5 mm surface |
|---|
Notifier Addressable Manual Call Point with Isolator, Flexible Element, M700KACI-FF
