C-TEC 800 Series Nurse Call Point, Button Reset with Remote Socket NC802DB
About this product
The C-TEC NC802DB is a button reset call point for raising Standard calls on an 800 Series Call System, a type of nurse call. It suits care settings and the installers who fit them. It has call and reset buttons, a red reassurance LED and a 6.35mm jack plug socket.
Key features
- One press to ask for help – a Call button that generates Standard calls
- Reassures the person calling – a red LED confirms a call has been made
- Staff can cancel at the point – the Reset button also cancels Standard calls from other devices wired on the same zone
- Add a lead or mat – a 6.35mm jack plug socket for an optional tail call lead or pressure mat
- Add a ceiling pull – an expansion connection for an optional NC807C ceiling pull unit
- Fits standard boxes – a standard UK 25mm single gang flush or surface back box
For installers
- Power: quiescent current 0mA (none). Alarm current is determined by the type of control equipment and number / type of field devices connected.
- Mounting: a standard UK 25mm single gang flush or surface back box. Size 87 W x 87 H x 32 D mm.
- Cabling: SIG (Signal); -Ve (Negative); RC (for the optional connection of an NC807C ceiling pull unit).
- Compatibility: for an 800 Series Call System. No onboard infrared receiver.
Frequently asked questions
Is this a fire alarm call point?
No. It is a call and reset point for an 800 Series Call System, used to call for help. It is not a fire alarm device.
What can plug into the socket?
An optional tail call lead, pressure mat or other ancillary calling device, using a 6.35mm jack plug.
What calls does it cancel?
Calls made from the NC802DB, and Standard calls from other devices wired on the same zone, such as ceiling pull units in Ensuite areas.
Which call types can it make?
Standard calls only.
Can it take calls from an infrared transmitter?
No. It has no onboard infrared receiver.
Can it be used in a wet room?
It is rated IP20, so keep it out of wet areas. A ceiling pull connected to it is the usual route in an ensuite.
-
Download
- NC802DB datasheet
Specifications
Dimensions
Specifications
| Brand | C-TEC |
|---|---|
| Model | NC802DB |
| Manufacturer Part Number (MPN) | NC802DB |
| Product type | Standard Call Point Button Reset c/w Remote Socket |
| System | 800 Series Call System |
| Quiescent current | 0mA (none) |
| Alarm current | Determined by the type of control equipment and number / type of field devices connected |
| Indicators | Red Reassurance LED (lit constant for Standard calls) |
| Controls | Call button (generates Standard calls only); Reset button (cancels Standard calls from the NC802DB and Standard calls from other devices wired on the same Zone) |
| Connections | SIG (Signal); -Ve (Negative); RC (for the optional connection of an NC807C ceiling pull unit) |
| Expansion connections | Yes. For an optional NC807C ceiling pull unit |
| Remote socket | 6.35mm jack plug socket, for optional tail call leads, floor pressure mats, air switches etc |
| Onboard infrared receiver | No |
| Product dimensions | 87 W x 87 H x 32 D mm |
| Construction and finish | Plastic |
| IP rating | IP20 |
| Weight | 64g |
| Operating conditions | -5°C to +40°C. Max. relative humidity 95% non-condensing |
Dimensions
| Dimensions | 87 W x 87 H x 32 D mm |
|---|
C-TEC 800 Series Nurse Call Point, Button Reset with Remote Socket NC802DB
